OSHA Safety Quiz Questions And Answers
-
What's the essential piece of safety gear for welders?
-
Eye Protection
-
Steel toe shoes
-
Hard Hats
-
Ear Protection
-
Are you aware of the OSHA safety measures? Here is this OSHA safety quiz to check your knowledge on this topic. This is something that a person should always be updated about. So, it is time to check how well you know these measures and what more you need to learn. Even if you miss out on some questions, we See morewill help you with the correct answer. Give it a go! All the best! You can share the quiz with others from the safety department.
(205).jpg "OSHA Safety Quiz Questions And Answers - Quiz")
Quiz Preview
- 2.
What causes the most construction-site fatalities?
-
Electrocution
-
Trench Collapse
-
Fall From Height
-
Contact with Chemicals
Correct Answer
A. Fall From HeightExplanation
Fall from height is the leading cause of construction-site fatalities. Workers often perform tasks at elevated locations, such as scaffolding, ladders, or rooftops, which increases the risk of falls. These accidents can occur due to lack of fall protection equipment, inadequate safety measures, unstable structures, or human error. Falls from heights can result in severe injuries or even death, making it crucial for construction workers to receive proper training, use appropriate safety equipment, and follow safety protocols to prevent such incidents.Rate this question:
-
- 3.
What is the most dangerous thing associated with asbestos?
-
Chemical Burns
-
Lung Disease
-
Eye Damage
-
Electrocution
Correct Answer
A. Lung DiseaseExplanation
Asbestos is known to be most dangerous due to its association with lung disease. When asbestos fibers are inhaled, they can become lodged in the lungs and cause various respiratory issues. Prolonged exposure to asbestos can lead to serious conditions such as asbestosis, lung cancer, and mesothelioma. These diseases can be life-threatening and have long-term effects on the respiratory system. Therefore, lung disease is the most dangerous thing associated with asbestos.Rate this question:
-
- 4.
What types of tools can reduce injury?
-
Ergonomic
-
Economic
-
Imminent
-
Intuit
Correct Answer
A. ErgonomicExplanation
Ergonomic tools can reduce injury because they are designed to fit the natural movements and capabilities of the human body. These tools are specifically created to minimize strain, discomfort, and the risk of injury during use. They often have features such as adjustable handles, cushioned grips, and proper weight distribution to ensure that they are comfortable and safe to use. By using ergonomic tools, individuals can reduce the likelihood of developing musculoskeletal disorders, such as back pain or carpal tunnel syndrome, and improve overall work efficiency and productivity.Rate this question:
-
- 5.
Which statement isn't true?
-
Virus comes in different types.
-
Virus infect living cells
-
Virus can replicate without host.
-
Virus can cause illness.
Correct Answer
A. Virus can replicate without host.Explanation
The statement "Virus can replicate without a host" is not true. Viruses are obligate intracellular parasites, which means they require a host cell to replicate and reproduce. They cannot carry out metabolic processes or replicate independently outside of a host cell. Viruses inject their genetic material into host cells and hijack the cellular machinery to produce more viral particles. Therefore, viruses are entirely dependent on host cells for their replication, making the statement incorrect.Rate this question:
-
- 6.
A GFCI primarily reduces the risk of:
-
Electrocution
-
Falls
-
Trench Collapse
-
Chemical Spills
Correct Answer
A. ElectrocutionExplanation
A GFCI, or Ground Fault Circuit Interrupter, is a safety device that is designed to protect against the risk of electrocution. It works by monitoring the flow of electricity and quickly shutting off power if it detects any imbalances or leaks. This helps to prevent serious electrical shocks and potential fatalities. Therefore, the correct answer is electrocution.Rate this question:
-
- 7.
Which of the following is a primary responsibility of OSHA (Occupational Safety and Health Administration)?
-
Environmental protection
-
Public health services
-
Workplace safety regulation
-
Wildlife conservation
Correct Answer
A. Workplace safety regulationExplanation
OSHA's primary role is to ensure safe and healthy working conditions for employees by setting and enforcing workplace safety and health standards.Rate this question:
-
- 8.
Scaffolds have to be designed to carry ______ times the intended load, according to OSHA guidelines.
-
2
-
4
-
10
-
50
Correct Answer
A. 4Explanation
According to OSHA guidelines, scaffolds have to be designed to carry four times the intended load. This means that the scaffold must be able to support a load that is four times heavier than what it is actually expected to carry. This is to ensure the safety of workers and prevent any accidents or collapses that may occur due to overloading.Rate this question:
-
- 9.
Which worker is most likely to experience silica exposure?
-
Painter
-
Carpenter
-
Electrician
-
Mason
Correct Answer
A. MasonExplanation
A mason is most likely to experience silica exposure because they work with materials such as bricks, concrete, and stone, which contain high levels of silica. When these materials are cut, drilled, or ground, they can release silica dust into the air. Breathing in this dust can lead to serious health issues, including lung cancer, silicosis, and other respiratory diseases. While painters, carpenters, and electricians may also encounter silica dust in certain situations, masons are more directly exposed to it on a regular basis.Rate this question:
-
- 10.
When is it fine to dig a trench with 90-degree walls?
-
When digging in solid rock
-
When digging in clay
-
When digging in the sand
-
Never
Correct Answer
A. When digging in solid rockExplanation
When digging in solid rock, it is fine to dig a trench with 90-degree walls because solid rock provides stability and support to the walls of the trench. The rock acts as a natural barrier, preventing the walls from collapsing. However, when digging in clay or sand, the walls of the trench are more likely to collapse due to the lack of stability and cohesion in these materials. Therefore, it is not recommended to dig a trench with 90-degree walls in clay or sand.Rate this question:
-
Quiz Review Timeline (Updated): Jun 28, 2024 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jun 28, 2024Quiz Edited by
ProProfs Editorial Team -
Jul 03, 2020Quiz Created by
Pankajp50628065
Back to top