Computer Organization And Architecture: Quiz!
-
Data input command is just the opposite of a:
-
Test command
-
Control command
-
Data output
-
Data channel
-
Explore the fundamentals of computer architecture with this engaging quiz! Assess your understanding of instruction sets, memory characteristics, addressing modes, data storage, and memory hierarchy. Perfect for learners looking to deepen their knowledge in computer organization.
(181).jpg "Computer Organization And Architecture: Quiz! - Quiz")
Quiz Preview
- 2.
A group of bits that tell the computer to perform a specific operation is known as:
-
Instruction code
-
Micro operation
-
Accumulator
-
Register
Correct Answer
A. Instruction codeExplanation
An instruction code is a group of bits that specifically instructs the computer to perform a particular operation. It serves as a command to the computer's processor, telling it what task to execute. This code contains the necessary information and parameters for the operation, allowing the computer to carry out the desired task accurately.Rate this question:
-
- 3.
What characteristics of RAM makes it not suitable for permanent memory?
-
To slow
-
Unreliable
-
Volatile in nature
-
None of the above
Correct Answer
A. Volatile in natureExplanation
RAM (Random Access Memory) is not suitable for permanent memory because it is volatile in nature. Volatility means that the data stored in RAM is temporary and gets erased when the power is turned off or lost. Unlike permanent storage devices like hard drives or solid-state drives, RAM does not retain data when the system is powered off. This makes RAM unsuitable for storing important or long-term data as it cannot provide persistent storage.Rate this question:
-
- 4.
A register capable of shifting is bits either left or right is called
-
Parallel register
-
Sequence register
-
Shift register
-
Storage register
Correct Answer
A. Shift registerExplanation
A register capable of shifting its bits either left or right is called a shift register. This type of register allows the data to be shifted in a serial manner, either in a parallel or sequential fashion. It is commonly used in digital systems for tasks such as data storage, data manipulation, and serial-to-parallel or parallel-to-serial conversion. The ability to shift the bits in different directions makes the shift register a versatile component in various applications.Rate this question:
-
- 5.
Computers use addressing mode technique for:
-
Giving programming versatility to the user by providing facilities by providing facilities as pointers to memory computer for loop control
-
To reduce numbers of bits in the field of instruction
-
Specifying rules for modifying or interpreting address field of the instruction
-
All of the above
Correct Answer
A. All of the aboveExplanation
The addressing mode technique in computers serves multiple purposes. Firstly, it provides programming versatility to the user by offering facilities such as pointers to memory, allowing for more flexible programming. Secondly, it helps reduce the number of bits required in the instruction field, optimizing memory usage. Lastly, it specifies rules for modifying or interpreting the address field of the instruction, ensuring proper execution of instructions. Therefore, the correct answer is "all of the above."Rate this question:
-
- 6.
A group of bits that tells the computer to perform a specific operation is known as:
-
Instruction code
-
Micro operation
-
Accumulator
-
Register
Correct Answer
A. Instruction codeExplanation
The correct answer is instruction code. An instruction code is a group of bits that provides a specific command or operation to the computer. It tells the computer what task it needs to perform, such as adding two numbers or storing data in memory. The instruction code is decoded by the computer's processor, which then carries out the corresponding operation.Rate this question:
-
- 7.
The average time required to reach a storage location in memory and obtain its content is called the?
-
Seek time
-
Turn around time
-
Access time
-
Transfer time
Correct Answer
A. Access timeExplanation
The average time required to reach a storage location in memory and obtain its content is called the access time. This includes the time it takes to locate the data on the storage device and retrieve it. Seek time refers to the time it takes for the disk drive to position its read/write heads over the correct track. Turn around time is the total time it takes for a process to complete, including waiting time and execution time. Transfer time refers to the time it takes to transfer data between the storage device and the computer's memory.Rate this question:
-
- 8.
The most common addressing techniques used by CPU is:
-
Indirect addressing techniques
-
Direct addressing techniques
-
Immediate addressing techniques
-
All of the above
Correct Answer
A. All of the aboveExplanation
The correct answer is "All of the above". This means that the most common addressing techniques used by the CPU include indirect addressing techniques, direct addressing techniques, and immediate addressing techniques. These techniques are used to access and manipulate data in different ways. Indirect addressing involves using a memory address to access data, direct addressing involves directly specifying the memory address of the data, and immediate addressing involves using a constant value as the data. All of these techniques are commonly used by the CPU for efficient data processing.Rate this question:
-
- 9.
An interface that provides the method for transferring binary information between internal storage and external devices is called
-
I/O interface
-
Input interface
-
Output interface
-
I/O bus
Correct Answer
A. I/O interfaceExplanation
An interface that provides the method for transferring binary information between internal storage and external devices is called an I/O interface. This interface allows for the input and output of data between the computer's internal storage and external devices such as keyboards, mice, printers, and storage devices. It enables the computer to communicate with these devices and transfer data in a binary format, facilitating the exchange of information between the computer system and the external world.Rate this question:
-
- 10.
Which of the following is the main memory?
-
Secondary memory
-
Auxiliary memory
-
Cache memory
-
Virtual memory
Correct Answer
A. Cache memoryExplanation
Cache memory is the correct answer because it is a type of main memory that is used to store frequently accessed data for faster retrieval by the CPU. It is a small, high-speed memory located close to the CPU, which helps in reducing the time taken to access data from the main memory. Cache memory acts as a buffer between the CPU and the main memory, improving the overall performance of the system by reducing the average access time.Rate this question:
-
- 11.
What is meant by a dedicated computer?
-
Which is used by a only one person
-
Which is assigned to only one task
-
Which does one kind of software
-
Which is meant to application software only
Correct Answer
A. Which is assigned to only one taskExplanation
A dedicated computer refers to a computer system that is assigned to only one task. This means that the computer is specifically designed and configured to perform a single function or operation. It is not shared or used for multiple purposes or tasks. This ensures that the computer's resources and capabilities are fully utilized for the assigned task, resulting in optimal performance and efficiency.Rate this question:
-
- 12.
The circuit used for store the one bit of data is known as:
-
Register
-
Encoder
-
Decoder
-
Flip-flop
Correct Answer
A. Flip-flopExplanation
A flip-flop is a circuit used to store one bit of data. It is a fundamental building block of digital circuits and is commonly used for storing and transferring data in sequential logic systems. Unlike other options like a register, encoder, or decoder, a flip-flop specifically focuses on the storage of a single bit of data.Rate this question:
-
- 13.
Which of the following is the lowest in memory hierarchy?
-
Cache memory
-
Secondary memory
-
RAM
-
Register
Correct Answer
A. Secondary memoryExplanation
Secondary memory is the lowest in memory hierarchy because it has the slowest access time compared to other types of memory. Secondary memory devices, such as hard disk drives and solid-state drives, are used for long-term storage of data and are typically slower than cache memory, RAM, and registers. Cache memory, RAM, and registers have faster access times and are used for storing data that the processor needs to access frequently and quickly.Rate this question:
-
- 14.
The addressing mode used in an instruction of the form ADD X Y is
-
Absolute
-
Indirect
-
Index
-
None of these
Correct Answer
A. IndexExplanation
The addressing mode used in an instruction of the form ADD X Y is index. In this mode, the value of X is added to the value stored in the index register Y to calculate the effective address of the operand. This allows for efficient access to array elements or data structures by using a base address and an offset. By using the index addressing mode, the instruction can dynamically calculate the memory location of the operand based on the value in the index register.Rate this question:
-
- 15.
Von Neumann architecture is __________
-
SISD
-
MIMD
-
SIMD
-
MISD
Correct Answer
A. SISDExplanation
Von Neumann architecture refers to a computer design where a single instruction stream is executed on a single data stream at a time. This means that the computer processes instructions sequentially, one after the other, and operates on a single piece of data at a time. This architecture is known as SISD, which stands for Single Instruction, Single Data. It is the simplest form of computer architecture and is commonly used in most personal computers and traditional processors.Rate this question:
-
- 16.
The operation executed in data and stored in the register is called :
-
Macro operation
-
Micro operation
-
Bit operation
-
byte operation
Correct Answer
A. Micro operationExplanation
A micro operation refers to the operation that is performed on data and stored in the register. It is a low-level operation that deals with individual bits or small groups of bits within a computer's central processing unit (CPU). These operations are essential for the execution of instructions and the manipulation of data within a computer system.Rate this question:
-
- 17.
Logic gates with a set of input and output are arrangement of:
-
Combinational circuit
-
Logic circuit
-
Design circuit
-
Register
Correct Answer
A. Combinational circuitExplanation
A combinational circuit is a type of logic circuit that has a set of inputs and outputs. It is designed to produce an output based solely on the current input values, without any memory or feedback. This means that the output of a combinational circuit is determined only by the combination of inputs at a given moment in time, hence the name "combinational circuit". Therefore, a combinational circuit is the correct arrangement of logic gates with a set of input and output.Rate this question:
-
- 18.
The combination between components in a microcomputer takes place via the address and:
-
I/O bus
-
Data bus
-
Address bus
-
Control lines
Correct Answer
A. Data busExplanation
In a microcomputer, the combination between components occurs through the address and data bus. The address bus is responsible for transmitting the memory address where data is stored or retrieved, while the data bus carries the actual data being transferred. The control lines coordinate and regulate the flow of information between components. However, the control lines alone cannot transfer data, so they are not the correct answer. Therefore, the correct answer is the data bus, as it is the pathway for the actual data transfer between components in a microcomputer.Rate this question:
-
- 19.
A binary digit is called:
-
Byte
-
Bit
-
Register
-
Character
Correct Answer
A. BitExplanation
A binary digit is called a "bit" because it represents the most basic unit of information in computing. A bit can have two possible values, 0 or 1, which correspond to the off and on states of an electronic switch. A register, on the other hand, is a small amount of fast memory within a computer processor. While a register can store multiple bits of information, it is not specifically referred to as a binary digit. Therefore, the correct answer is "bit".Rate this question:
-
- 20.
The instruction, Add R1,R2,R3 in RTN is _______
-
R3=R1+R2+R3
-
R3<-[R1]+[R2]+[R3]
-
R3=[R1]+[R2]
-
R3<-[R1]+[R2]
-
Option 5
Correct Answer
A. R3<-[R1]+[R2]Explanation
The correct answer is "R3Rate this question:
-
Quiz Review Timeline (Updated): Nov 10, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Nov 10, 2023Quiz Edited by
ProProfs Editorial Team -
Aug 28, 2020Quiz Created by
Pappukumarsh
Back to top