Static & Dynamic Routing Test

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By CiscoUSPLautoka
C
CiscoUSPLautoka
Community Contributor
Quizzes Created: 1 | Total Attempts: 2,610
| Attempts: 2,621
SettingsSettings
Please wait...
  • 1/15 Questions

    Which command will show the administrative distance of routes?

    • R1# show interfaces
    • R1# show ip route
    • R1# show ip interfaces
    • R1# debug ip routing
Please wait...
About This Quiz

This Static & Dynamic Routing Test assesses knowledge in routing protocols and network configuration. It covers administrative distances, load balancing, routing table updates, and path determination, essential for network professionals.

Static & Dynamic Routing Test - Quiz

Quiz Preview

  • 2. 

    R2#show ip route<output omitted>Gateway of last resort is not setD 192.168.1.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0C 192.168.2.0/24 is directly connected, Serial0/0/0C 192.168.3.0/24 is directly connected, FastEthernet0/0C 192.168.4.0/24 is directly connected, Serial0/0/1R 192.168.5.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1D 192.168.6.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0/0R 192.168.7.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1R 192.168.8.0/24 [120/2] via 192.168.4.1, 00:00:08, Serial0/0/1Network 192.168.4.0 is directly connected to R2

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The given output shows that the network 192.168.4.0 is directly connected to R2. This is indicated by the line "C 192.168.4.0/24 is directly connected, Serial0/0/1". Therefore, the statement "Network 192.168.4.0 is directly connected to R2" is true.

    Rate this question:

  • 3. 

     R2#show ip route Gateway of last resort is not setD 192.168.1.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0C 192.168.2.0/24 is directly connected, Serial0/0/0C 192.168.3.0/24 is directly connected, FastEthernet0/0C 192.168.4.0/24 is directly connected, Serial0/0/1R 192.168.5.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1D 192.168.6.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0/0R 192.168.7.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1R 192.168.8.0/24 [120/2] via 192.168.4.1, 00:00:08, Serial0/0/1Network 192.168.5.0/24 is 1 hop away from R2

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The given output of the "show ip route" command shows the routing table of R2. The line "R 192.168.5.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1" indicates that the network 192.168.5.0/24 is reachable via the next hop IP address 192.168.4.1, which is connected to the Serial0/0/1 interface. Since the next hop is only one hop away from R2, the statement "Network 192.168.5.0/24 is 1 hop away from R2" is true.

    Rate this question:

  • 4. 

    How many equal-cost paths can a dynamic routing protocol use for load balancing bydefault?

    • 2

    • 3

    • 4

    • 6

    Correct Answer
    A. 2
    Explanation
    A dynamic routing protocol can use two equal-cost paths for load balancing by default. This means that the routing protocol can distribute network traffic across two different paths that have the same cost, allowing for better utilization of available network resources and improving overall network performance. By dividing the traffic between these two paths, the protocol can achieve load balancing and prevent congestion on a single path.

    Rate this question:

  • 5. 

    Which statement best describes convergence on a network?

    • The amount of time required for routers to share administrative configuration changes, such a password changes, from one end of a network to the other end

    • The time required for the routers in the network to update their routing tables after a topology change has occurred

    • The time required for the routers in one autonomous system to learn routes to desti- nations in another autonomous system

    • The time required for routers running disparate routing protocols to update their routing tables

    Correct Answer
    A. The time required for the routers in the network to update their routing tables after a topology change has occurred
    Explanation
    Convergence on a network refers to the time it takes for routers in the network to update their routing tables after a topology change has occurred. This means that when there is a change in the network's topology, such as a link failure or a new connection, the routers need to adjust their routing tables to reflect the new paths and ensure efficient data transmission. The faster the convergence, the quicker the network can adapt to changes and continue functioning properly.

    Rate this question:

  • 6. 

    Designate the following characteristics as belonging to either a classful routing proto-col or a classless routing protocol.Sends subnet mask in its routing updates:

    Correct Answer
    classless routing protocol
    Explanation
    Classful routing protocols do not send subnet masks in their routing updates. They assume a default subnet mask based on the class of the IP address. Classless routing protocols, on the other hand, send subnet masks in their routing updates, allowing for more flexible and efficient routing. This allows for the use of variable length subnet masks (VLSM) and the ability to subnet a network into smaller subnets.

    Rate this question:

  • 7. 

    Designate the following characteristics as belonging to either a classful routing proto-col or a classless routing protocol.Supports discontiguous networks:

    Correct Answer
    classless routing protocol
    Explanation
    Classful routing protocols do not support discontiguous networks, meaning that the network must be contiguous or continuous. Classless routing protocols, on the other hand, do support discontiguous networks. This means that classless routing protocols allow for the division of a network into smaller subnets, even if they are not physically connected. Therefore, the given answer that "classless routing protocol" supports discontiguous networks is correct.

    Rate this question:

  • 8. 

    R2#show ip route<output omitted>Gateway of last resort is not setD 192.168.1.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0C 192.168.2.0/24 is directly connected, Serial0/0/0C 192.168.3.0/24 is directly connected, FastEthernet0/0C 192.168.4.0/24 is directly connected, Serial0/0/1R 192.168.5.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1D 192.168.6.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0/0R 192.168.7.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1R 192.168.8.0/24 [120/2] via 192.168.4.1, 00:00:08, Serial0/0/1Destination IP packet 192.168.2.200 will be forwarded to R2 S0/0/1

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The given output of the "show ip route" command shows that the network 192.168.2.0/24 is directly connected to R2's Serial0/0/0 interface, not Serial0/0/1. Therefore, any destination IP packet for 192.168.2.200 will not be forwarded to R2 S0/0/1. Hence, the correct answer is False.

    Rate this question:

  • 9. 

    Designate the following characteristics as belonging to either a classful routing proto-col or a classless routing protocol.EIGRP, OSPF, and BGP:

    Correct Answer
    classless routing protocol
    Explanation
    EIGRP, OSPF, and BGP are all examples of classless routing protocols. Classless routing protocols do not use fixed network classes (such as Class A, B, or C) to determine network boundaries. Instead, they use variable length subnet masks (VLSM) to allow for more efficient use of IP address space. Classless routing protocols can support the use of subnetting and supernetting, allowing for more flexibility in network design and address allocation.

    Rate this question:

  • 10. 

    Router R1 is using the RIPv2 routing protocol and has discovered multiple unequalpaths to reach a destination network. How will Router R1 determine which path is thebest path to the destination network?

    • Lowest metric.

    • Lowest metric.

    • Lowest administrative distance

    • Highest administrative distance

    Correct Answer
    A. Lowest metric.
    Explanation
    Router R1 will determine the best path to the destination network based on the lowest metric. The metric is a value assigned to each path, indicating the cost or preference of that path. In RIPv2, the metric is typically based on factors such as hop count, bandwidth, delay, reliability, and load. By selecting the path with the lowest metric, Router R1 ensures that it chooses the path with the least cost or best conditions to reach the destination network.

    Rate this question:

  • 11. 

    R2#show ip route Gateway of last resort is not setD 192.168.1.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0C 192.168.2.0/24 is directly connected, Serial0/0/0C 192.168.3.0/24 is directly connected, FastEthernet0/0C 192.168.4.0/24 is directly connected, Serial0/0/1R 192.168.5.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1D 192.168.6.0/24 [90/2172416] via 192.168.2.1, 00:00:24, Serial0/0/0R 192.168.7.0/24 [120/1] via 192.168.4.1, 00:00:08, Serial0/0/1R 192.168.8.0/24 [120/2] via 192.168.4.1, 00:00:08, Serial0/0/1Refer to the Exhibit: Network 192.168.1.0 was learned through EIGRP routing protocol with the cost of 90 

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The given output shows the routing table of the router using the "show ip route" command. The line "D 192.168.1.0/24 [90/2172416] via 192.168.2.1" indicates that the network 192.168.1.0/24 is learned through EIGRP with a cost of 90. Therefore, the statement "Network 192.168.1.0 was learned through EIGRP routing protocol with the cost of 90" is true.

    Rate this question:

  • 12. 

    When do directly connected networks appear in the routing table?

    • When they are included in a static route

    • When they are used as an exit interface

    • As soon as they are addressed and operational at Layer 2

    • As soon as they are addressed and operational at Layer 3

    Correct Answer
    A. As soon as they are addressed and operational at Layer 3
    Explanation
    Directly connected networks appear in the routing table as soon as they are addressed and operational at Layer 3. This means that when a network interface on a router is configured with an IP address and is able to communicate with other devices on the same network, the router will add that network to its routing table. This allows the router to know that it can directly reach that network without needing to go through any other routers.

    Rate this question:

  • 13. 

    Designate the following characteristics as belonging to either a classful routing proto-col or a classless routing protocol.RIP version 1 and IGRP:

    Correct Answer
    classfull routing protocol
    Explanation
    RIP version 1 and IGRP are both examples of classful routing protocols. Classful routing protocols do not include subnet mask information in their routing updates and assume that all networks within a major network have the same subnet mask. Therefore, they do not support variable length subnet masking (VLSM) or the use of different subnet masks within the same major network. RIP version 1 and IGRP both adhere to this classful routing behavior.

    Rate this question:

  • 14. 

    Designate the following characteristics as belonging to either a classful routing proto-col or a classless routing protocol.1. Does not support discontiguous networks 

    Correct Answer
    classfull routing protocol
    Explanation
    A classful routing protocol is a type of routing protocol that does not support discontiguous networks. In classful routing, networks are divided into predefined classes based on their size, and the routing protocol assumes that all networks within a class have the same subnet mask. This means that classful routing protocols do not have the ability to route traffic to discontiguous networks, which are networks that are not adjacent or connected. Therefore, the given characteristic of "Does not support discontiguous networks" belongs to a classful routing protocol.

    Rate this question:

Quiz Review Timeline (Updated): Mar 22, 2023 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Mar 22, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Jun 02, 2016
    Quiz Created by
    CiscoUSPLautoka

Recent Quizzes

OSPF, EIGRP, BGP E ISL OSPF, EIGRP, BGP E ISL
Internetworking I - Routing Protocols Internetworking I - Routing Protocols
OSPF, EIGRP, BGP E ISL OSPF, EIGRP, BGP E ISL
Internetworking I - Routing Protocols Internetworking I - Routing Protocols
CCNA Final: Routing Protocols (New) CCNA Final: Routing Protocols (New)
CCNA: Routing Protocols and Concepts: Chapter 7 CCNA: Routing Protocols and Concepts: Chapter 7
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.