Basics Of Networking Quiz 1
-
Which of the following is true for coaxial cables?
-
Coaxial cables use copper wires, which are good conductors of electricity.
-
Coaxial cables provide adequate protection against EMI during data transmissions.
-
Coaxial cables use light rays instead of electricity to transmit data.
-
Coaxial cables can be differentiated into two categories, single-mode and multimode.
-
Are you ready to test your knowledge of networking fundamentals? Dive into the world of computer networks with our Basics of Networking Quiz! Designed especially for students, this captivating and engaging quiz will challenge your understanding of the core concepts of networking.
From understanding IP addresses to unraveling the mysteries of routers and switches, this quiz covers the essential building See moreblocks of modern networks. Unleash your problem-solving skills as you navigate through questions about network troubleshooting, subnetting, and network security. Can you identify common network issues and implement effective solutions?
Whether you're studying computer science or simply curious about how networks function, this quiz offers an interactive and educational experience. Test your knowledge and discover new insights into the fascinating world of networking.
Quiz Preview
- 2.
Regarding fiber-optic cables, which transmission mode is used for transmitting data over long distances?
-
Infrared
-
Radio
-
Single-mode
-
Multimode
Correct Answer
A. Single-modeExplanation
Single-mode is the correct answer because it is the transmission mode used for transmitting data over long distances in fiber-optic cables. Single-mode cables have a smaller core diameter, allowing for a single beam of light to travel straight down the center of the cable without bouncing off the walls. This minimizes signal loss and allows for longer transmission distances. In contrast, multimode cables have a larger core diameter, which allows multiple beams of light to travel through the cable, but this can cause signal distortion and limits the distance over which data can be transmitted.Rate this question:
-
- 3.
What is the maximum bandwidth that can be supported by fiber optics cable?
-
1000 Mbps
-
50 Tbps
-
10 Gbps
-
100 Tbps
Correct Answer
A. 100 TbpsExplanation
Fiber optics cables offer high-speed data transmission through the use of light signals. With bandwidths ranging from 10 Gbps to an impressive 100 Tbps, these cables enable rapid and reliable communication, making them crucial in modern networks for data-intensive applications, telecommunications, and internet services.Rate this question:
-
- 4.
Media Access Control (MAC) and Logical Link Control (LLC) are two sublayers of _________________.
-
Session layer
-
Network layer
-
Transport layer
-
Data Link layer
Correct Answer
A. Data Link layerExplanation
MAC (Media Access Control) and LLC (Logical Link Control) are two sublayers of the Data Link layer in the OSI model. The Data Link layer is responsible for providing reliable and error-free communication between two directly connected devices. The MAC sublayer handles the addressing and access to the physical media, while the LLC sublayer manages the flow control and error detection of the data being transmitted. Therefore, the correct answer is the Data Link layer.Rate this question:
-
- 5.
Salen Chetty is the network administrator of Vodafone Fiji Ltd. He needs to design the network setup for his company. More than 1650000 hosts will be connected to the network. Which IP addressing class would best meet his requirements?
-
Class B
-
Class A
-
Class C
-
Class D
Correct Answer
A. Class AExplanation
Class A IP addressing would best meet the requirements of Salen Chetty for designing the network setup for Vodafone Fiji Ltd. Class A provides a large range of IP addresses, allowing for more than 16 million hosts to be connected to the network. As there are more than 1,650,000 hosts in this case, Class A would be the most suitable choice. Class B and Class C have smaller ranges, while Class D is reserved for multicast addresses.Rate this question:
-
- 6.
Consider the following statements: Statement A: In Duplex transmission, either node can transmit while the other can receive data.Statement B: In half-duplex transmission, both nodes can transmit as well as receive data at the same time. Which of the following is true concerning the above statements?
-
Both statements, A and B, are false.
-
Statement A is false, and statement B is true.
-
Both statements, A and B, are true.
-
Statement A is true, and statement B is false.
Correct Answer
A. Statement A is true, and statement B is false.Explanation
Statement A is true because in duplex transmission, one node can transmit data while the other node receives data. However, statement B is false because in half-duplex transmission, only one node can transmit data at a time while the other node is in a receiving mode. Both nodes cannot transmit and receive data simultaneously in half-duplex transmission.Rate this question:
-
- 7.
Radio waves and microwaves are used in which of the following communications?
-
Voice over IP
-
IP Telephony
-
Wireless
-
Enterprise
Correct Answer
A. WirelessExplanation
Radio waves and microwaves are used in wireless communications. Wireless communication refers to the transmission of information without the use of physical connections or wires. Radio waves and microwaves are electromagnetic waves that can be used to transmit signals over long distances. They are commonly used in various wireless communication systems such as mobile phones, Wi-Fi networks, Bluetooth devices, and satellite communications. Therefore, the correct answer is "Wireless".Rate this question:
-
- 8.
IP addresses exist in the numeric format of XXX.YYY.ZZZ.AAA. This format of specifying addresses is referred to as the dotted decimal notation. Each address consists of four __________ separated by dots(.).
-
8-bit fields
-
4-bit fields
-
6-bit fields
-
2-bit fields
Correct Answer
A. 8-bit fieldsExplanation
IP addresses are represented in the dotted decimal notation, where each address is divided into four 8-bit fields separated by dots. This notation allows for easy identification and organization of IP addresses, as each field represents a specific portion of the address.Rate this question:
-
- 9.
ARPA stands for ___________________________.
-
Advanced Research Projects Administration
-
Advanced Repeater Projects Agency
-
Advanced Research Projects Agency
-
Advanced Rear Projects Agency
Correct Answer
A. Advanced Research Projects AgencyExplanation
ARPA stands for Advanced Research Projects Agency. This agency was established in 1958 by the United States Department of Defense. Its main purpose was to develop new technologies and conduct research in various fields, including science, technology, and engineering. ARPA played a crucial role in the development of the internet, as it funded the creation of ARPANET, the precursor to the modern internet. The agency's name was later changed to DARPA (Defense Advanced Research Projects Agency) in 1972.Rate this question:
-
- 10.
Which of the following statements is NOT true regarding networks?
-
The first network, called the ARPANET, was created by DOD with the help of the Advanced Research Projects Agency (ARPA).
-
Networks enable sharing of information across multiple networks.
-
Networks enable the centralization of data management.
-
Networks can be divided into four network topologies: mesh, cellular, star, and bus.
Correct Answer
A. Networks enable the centralization of data management. -
Quiz Review Timeline (Updated): Jul 16, 2024 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jul 16, 2024Quiz Edited by
ProProfs Editorial Team
Expert Reviewed by
Godwin Iheuwa -
Aug 03, 2008Quiz Created by
Kumar_niten
Back to top