Soal Jaringan WAN Kelas 11 Tkj Smk Setiabudhi

Pada proses otentifikasi PAP, yang diperlukan untuk masuk ke dalam jaringan adalah Registered ID dan Password.

In order for communication to occur, a proper signal format is required. This is achieved through the use of a CSU/DSU (Channel Service Unit/Data Service Unit). CSU/DSU is responsible for converting digital signals from the data terminal equipment (DTE) into a format that can be transmitted over a digital communication link. It also performs the reverse function, converting the received digital signals back into a format that can be understood by the DTE. Therefore, CSU/DSU is necessary for ensuring the compatibility of signals in a communication system.

The correct answer is WAN. A WAN (Wide Area Network) is a collection of LANs or workgroups that are connected using modems or the internet. It allows for communication and data sharing between different locations or organizations over a large geographic area.

POTS (Plain Old Telephone Services) berfungsi untuk memberikan layanan telepon suara. POTS merupakan sistem telepon tradisional yang menggunakan kabel tembaga untuk mengirim sinyal suara antara pengguna. Layanan ini tidak termasuk layanan internet cepat, layanan telepon video, atau layanan software. POTS hanya fokus pada penyediaan layanan telepon suara yang sederhana dan tidak melibatkan teknologi digital atau internet.

HDLC (High Level Data Link Control) is a WAN protocol that operates at the Data Link layer. The Data Link layer is responsible for the reliable transmission of data over a physical link. HDLC provides framing, error detection, and flow control mechanisms to ensure the integrity and efficiency of data transmission. It is commonly used in point-to-point and multipoint connections in wide area networks.

The given correct answer is "Boros kabel". The STAR network topology is known for its advantages such as ease of troubleshooting, easy network expansion, and flexibility. However, it is not known for being cable-intensive or wasteful in terms of cable usage.

SNMP stands for Simple Network Management Protocol. It is a standard protocol used for managing and monitoring network devices such as routers, switches, and servers. SNMP allows network administrators to collect and organize information about these devices, monitor their performance and health, and remotely manage them. It provides a set of commands and a framework for exchanging management information between network devices and a central management system.

The correct answer is "Upfront" because it is not a type of network topology. Mesh, Star, and Tiered are all examples of network topologies commonly used in wide area networks (WANs). A mesh network connects all devices to each other in a point-to-point manner, a star network has a central hub connecting all devices, and a tiered network has multiple levels of interconnected devices. However, "Upfront" does not describe any specific network topology and is therefore the exception in this list.

The given options are Router, Server-server dial in dan user-user yang melakukan dial out untuk tidak terkoneksi, Switch ATM menyediakan transfer data berkecepatan tinggi antara LAN dan WAN, and Multiplexer. All of these options are related to WAN (Wide Area Network) technologies except for the option "Server-server dial in dan user-user yang melakukan dial out untuk tidak terkoneksi" which refers to users dialing in to connect to a server or users dialing out to connect to each other without being connected to a network.

A routing switch is a network device that can forward data packets based on logical addresses such as IP addresses through the third layer of the OSI model. It combines the functions of a router and a switch, allowing it to route traffic between different networks based on IP addresses. This makes it an ideal choice for managing and directing network traffic efficiently.

The correct answer is Customer Premises Equipment. CPE refers to the equipment and devices that are located on the customer's premises and are used to connect to the service provider's network. This can include routers, modems, switches, and other networking devices.

PVC stands for Permanent Virtual Circuit, which is a type of virtual connection established between two endpoints in a network. It is not a network protocol, but rather a concept used in network infrastructure. HDLC, PPP, and ISDN, on the other hand, are all network protocols commonly used in wide area networks (WANs) for data transmission. Therefore, PVC is the option that does not belong to the list of WAN network protocols.

The correct answer is Channel Service Unit. CSU stands for Channel Service Unit, which is a device used in telecommunications to connect data terminal equipment (DTE) to a digital line. It provides signal amplification and conditioning to ensure reliable transmission of data over long distances. Central Service Unit, Channel Sender Unit, and Charger Service Universal are not the correct explanations for CSU.

When designing a WAN network, factors such as the cost of equipment, materials, and installation, the geographical and structural conditions of the network location, and the obstacles present at the installation site need to be considered. However, the brand of network equipment is not a critical factor in the design of a WAN network. Different brands may offer similar functionalities and performance, so the focus should be on selecting equipment that meets the network requirements rather than the brand name.

The correct answer is client to server. In a client-server network, multiple clients or users connect to a central server to access resources and services. This type of network allows for better management and control of resources, as the server handles tasks such as data storage, security, and software updates. It also ensures that the network remains operational even if one server fails, as clients can connect to other servers in the network.

The correct answer is 1, 3 and 5. This is because the given statements mention that WAN allows easy file sharing, enables the central office server to function as a data bank for branch offices, and facilitates communication between offices through email and chat. Additionally, it states that data pooling and updating can be done daily at specified times.

NetCut is an application that allows users to perform network disconnection and reconnection activities during monitoring. It is specifically designed for this purpose, making it the most suitable option among the given choices. WireShark is a network protocol analyzer, IPHost is a network monitoring tool, and Spicework is an IT management software, none of which are specifically designed for network disconnection and reconnection.

The given options are all related to the user levels in the ATM (Synchronous Transfer Mode) protocol. The "Taraf pemakai" refers to the user level, "Taraf kontrol" refers to the control level, "Taraf manajemen" refers to the management level, and "Taraf issue" is not a valid level in the ATM protocol. Therefore, the correct answer is "Taraf manajemen" as it represents the management level in the protocol.

The correct answer is "Kebutuhan segmen ditentukan oleh peralatan yang digunakan" (Segment requirements are determined by the equipment used). This means that the requirements for segments in a WAN are determined by the equipment being used. The type and capabilities of the equipment will determine the specific requirements for segmenting the WAN network.

HDLC (High Level Data Link Control) is a protocol that operates at the data link layer of the OSI model. The data link layer is responsible for the reliable transfer of data between two nodes on a network. A Network Interface Card (NIC) is a hardware component that connects a device, such as a computer or a router, to a network. It provides the physical interface for the device to send and receive data packets over the network. Therefore, it is correct to say that HDLC operates at the NIC level.