SMSM Rev03 Knowledge Check - SRC Safety & Quality Training - SRC-SQT-03-17

1. Generally, non-compliance may result from two actions: _, and _.

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.6.3 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.6.3 and try again.

Submit

2. Objectives of Safety Management System:

To ___ early identification of safety hazards and risks.

To take _ steps to reduce identified safety hazards and risk within all levels of activities.

To _ employees to promote and enhance safety culture to support SMS.

To establish and continually maintain an acceptable level of ___ and compliance within ATS Organization.

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.2 and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.2 and try again

Submit

3. Which of the following mishaps must an employee report.

Maintenance error

Safety violation

Injury

All of the above

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2 and try again.

4. The SMS is an industry standard of safety that is driven by International Civil Aviation Organization (ICAO) through various Civil Aviation Authorities.

True

False

*##*Correct!*##*Incorrect, please review the SMSM revision 03 part 1.4.1 and try again.

Explanation

*##*Correct!*##*Incorrect, please review the SMSM revision 03 part 1.4.1 and try again.

5. The employees role in the SMS include: Select all that apply.

Think - Think ahead, be proactive and critical.

Look - Keep eyes open for hazards and risks anticipated. See More - Say More - Solve More.

Stick - Adhere to SMSM policies and procedures.

Share - Tell your thoughts and innovations to prevent mishaps.

Participate - Report, Report & Report.

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 7.4 and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 7.4 and try again

Submit

6. Which of the following is not a safety culture component:

Learning Culture

Informed Culture

Reporting Culture

Just Culture

Different Culture

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.3 and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.3 and try again

7. Which statement is the most accurate:

ATS Personnel shall be expected to perform their jobs as they were trained and according to established law.

ATS Personnel shall be expected to perform their jobs as they were trained and according to the company rules.

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2.5 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2.5 and try again.

8. SRM is applied when: (select all that apply)

A new process such as MPD is introduced.

A new system or revision to an existing system is introduced.

Hazards are identified in any area or part of ATS station activity.

Ineffective risk control is identified during the safety assurance process.

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 5.2.1 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 5.2.1 and try again.

Submit

9. _______________________________at ATS are accountable for the delivery of the highest level of safety performance.

Only high levels of management and some employees

Only Management

All levels of management and all employees

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2.7 and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2.7 and try again

10. Select the most accurate statement:

Hazards should be identified before they lead to an event or other related safety occurrence.

Isolating hazard can’t always be achieved.

Elimination of hazard can always be achieved.

None of the above statements are accurate.

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.7.1.2 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.7.1.2 and try again.

11. Performing IFE maintenance work without CATD creates a non-compliance condition.

True

False

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.6 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.6 and try again.

12. Which of the following is an example of risk control.

Remote Diagnostic Kit

Avant

Safety Net

None of the above

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 1.2 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 1.2 and try again.

13. The ATS SMS applies to all of the following except:

Tools

Facilities

Employees

Customers

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.1.1 and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.1.1 and try again

14. ATS personnel shall report any unsafe condition and any safety violation observed or known about.

True

False

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2.6 and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 4.2.6 and try again

15. Which of the following is not a component of SMS:

Safety Policy.

Safety Risk Management.

Safety Quality Control.

Safety Promotion.

Safety Assurance

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 3 and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 3 and try again

16. The SRM is the process ATS uses to manage, asses and control risk that is related to its employees and their activities.

True

False

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 5.1.1

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 5.1.1

17. One of the objectives of the safety committee is to engage all employees in the support and creation of a safe and healthy environment at workplace and promote safety culture.

True

False

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.4.2 (a) and try again

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.4.2 (a) and try again

18. Which of the following methods do you use for confidential reporting:

SMSMF-06

Email

Suggestion Box

SMSF-04

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.8.3 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.8.3 and try again.

19. Which of the four components of the ATS safety culture would be defined as:

Employees understand the hazards and risk involved in their own operation.

Employees work continuously to identify risk to safety

Learning Culture

Informed Culture

Reporting Culture

Just Culture

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.3.1.2 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 2.3.1.2 and try again.

20. Match the following

The _______________ is where organization sets objectives, assigns responsibility, and sets standards. It is also where management conveys its commitment to safety performance of the organization to its employees.

The _______________ component provides decision making process for identifying hazards and mitigating risk based on thorough understanding of the organization’s system and their operating environment. SRM includes decision making regarding management acceptance of risk to operations. This component is the organization’s way of fulfilling its commitment to consider risk in their operations and to reduce it to an acceptable level.

_______________ provides the organization with the necessary processes to give confidence that the organization’s system is meeting safety objectives and that mitigation, or risk controls, developed under SRM are working. SA requires monitoring and measuring safety performance of operational processes and continuous improvement in the level of safety performance.

_______________ is designed to ensure employees have solid foundation regarding their safety responsibilities, the organization’s safety policy and expectations, reporting procedures, and familiarity with risk controls.

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 3 and try again.

Explanation

*##*Correct!*##*Incorrect! Please review SMSM revision 03 part 3 and try again.

Submit

Smsm Rev03 Knowledge Check - Src Safety & Quality Training - Src-sqt-03-17

1. Generally, non-compliance may result from two actions: _, and _.

2.

What first name or nickname would you like us to use?

3. Which of the following mishaps must an employee report.

4. The SMS is an industry standard of safety that is driven by International Civil Aviation Organization (ICAO) through various Civil Aviation Authorities.

5. The employees role in the SMS include: Select all that apply.

6. Which of the following is not a safety culture component:

7. Which statement is the most accurate:

8. SRM is applied when: (select all that apply)

9. _______________________________at ATS are accountable for the delivery of the highest level of safety performance.

10. Select the most accurate statement:

11. Performing IFE maintenance work without CATD creates a non-compliance condition.

12. Which of the following is an example of risk control.

13. The ATS SMS applies to all of the following except:

14. ATS personnel shall report any unsafe condition and any safety violation observed or known about.

15. Which of the following is not a component of SMS:

16. The SRM is the process ATS uses to manage, asses and control risk that is related to its employees and their activities.

17. One of the objectives of the safety committee is to engage all employees in the support and creation of a safe and healthy environment at workplace and promote safety culture.

18. Which of the following methods do you use for confidential reporting:

19. Which of the four components of the ATS safety culture would be defined as:

Employees understand the hazards and risk involved in their own operation.

Employees work continuously to identify risk to safety

20. Match the following

Smsm Rev03 Knowledge Check - Src Safety & Quality Training - Src-sqt-03-17

1. Generally, non-compliance may result from two actions: _____, and _____.

2.

What first name or nickname would you like us to use?

3. Which of the following mishaps must an employee report.

4. The SMS is an industry standard of safety that is driven by International Civil Aviation Organization (ICAO) through various Civil Aviation Authorities.

5. The employees role in the SMS include: Select all that apply.

6. Which of the following is not a safety culture component:

7. Which statement is the most accurate:

8. SRM is applied when: (select all that apply)

9. _______________________________at ATS are accountable for the delivery of the highest level of safety performance.

10. Select the most accurate statement:

11. Performing IFE maintenance work without CATD creates a non-compliance condition.

12. Which of the following is an example of risk control.

13. The ATS SMS applies to all of the following except:

14. ATS personnel shall report any unsafe condition and any safety violation observed or known about.

15. Which of the following is not a component of SMS:

16. The SRM is the process ATS uses to manage, asses and control risk that is related to its employees and their activities.

17. One of the objectives of the safety committee is to engage all employees in the support and creation of a safe and healthy environment at workplace and promote safety culture.

18. Which of the following methods do you use for confidential reporting:

19. Which of the four components of the ATS safety culture would be defined as: Employees understand the hazards and risk involved in their own operation. Employees work continuously to identify risk to safety

20. Match the following

1. Generally, non-compliance may result from two actions: _, and _.

19. Which of the four components of the ATS safety culture would be defined as:

Employees understand the hazards and risk involved in their own operation.

Employees work continuously to identify risk to safety