Computer Fundamental IT Solutions Quiz

The correct answer is ROM BIOS. The boot program, which is responsible for starting up the computer, is stored in the ROM BIOS (Read-Only Memory Basic Input/Output System). The ROM BIOS contains the firmware that initializes the hardware components of the computer and loads the operating system into memory. It is a non-volatile memory that retains its contents even when the computer is powered off.

Inkjet printers are capable of printing data quickly by spraying ink onto the paper. This process allows for the rapid application of ink, creating a high-speed printing experience. Laserjet printers use a different method, where a laser beam is used to transfer toner onto the paper. Drum printers are an older technology that uses a rotating drum with characters on its surface to print data. Dot-matrix printers use a matrix of small pins to strike an inked ribbon, transferring ink onto the paper. Therefore, the inkjet printer is the most suitable option for printing data quickly.

डिजिटल कंप्यूटर बाइनरी नंबर सिस्टम पर कार्य करता है। बाइनरी सिस्टम में केवल दो संख्याएं होती हैं, 0 और 1। कंप्यूटर की सभी गणनाएं और प्रक्रियाएं बाइनरी नंबरों का उपयोग करके की जाती हैं। बाइनरी सिस्टम के माध्यम से कंप्यूटर इलेक्ट्रॉनिक संकेतों को समझता है और उन्हें गणनाओं में उपयोग करता है।

The correct answer is 1.44 MB. This is because the capacity of a 3.5" floppy disk is commonly known to be 1.44 MB. The other options provided (1.42 MB, 1.48 MB, 1.45 MB) are not the standard capacities for a 3.5" floppy disk.

The correct answer is ROM BIOS. ROM BIOS stands for Read-Only Memory Basic Input Output System. It is a type of firmware that is stored on a computer's motherboard. When the computer is powered on, the ROM BIOS is responsible for initializing and testing the hardware components of the computer, as well as loading the operating system. It contains the instructions necessary to start up the computer and is not stored on the CPU, BOOT.INI, or CONFIGSYS.

The CPU is connected to the system bus on the motherboard. The system bus is responsible for transferring data between the CPU, memory, and other peripherals. Therefore, the system bus is the component that connects the CPU to other components on the motherboard.

The correct answer is "नॉन इम्पैक्ट". This is because the question is asking about the type of printer, and "नॉन इम्पैक्ट" translates to "non-impact" in English. The other options, "इम्पैक्ट" and "लेजर", refer to different types of printers and are not the correct answer. The option "इनमे से कोई नहीं" means "none of these" and is also not the correct answer.

The given question is asking about the necessary rules to establish connections between different computers. The options given are "नियम" (rules), "अनुपालन" (compliance), "प्रोटोकॉल" (protocol), and "निर्देश" (instructions). Among these options, "प्रोटोकॉल" (protocol) is the correct answer as it refers to a set of rules that govern the communication between computers. Protocols define the format, timing, sequencing, and error control of data transmission. Therefore, following protocols is necessary to establish connections between different computers.

ट्रैक बाल एक पोइंटिंग डिवाइस है, जिसे माउस के रूप में भी जाना जाता है। यह कंप्यूटर में उपयोग होने वाला एक उपकरण है जो कंप्यूटर के स्क्रीन पर उपयोगकर्ता के द्वारा चयनित ऑब्जेक्ट्स को कंट्रोल करने के लिए उपयोग होता है। इसे उपयोगकर्ता द्वारा स्क्रीन पर घुमाकर ऑब्जेक्ट को चुनने और इंटरैक्ट करने के लिए उपयोग किया जाता है।

not-available-via-ai

The question is asking which of the following is not a toggle. A toggle is a function or key on a device that can be switched on or off. Among the given options, "कंट्रोल" (Control) is not a toggle. It refers to the control key on a keyboard, which is not a toggle but a modifier key used in combination with other keys to perform various functions.

The correct answer is "लाइन प्रिंटर". A line printer is a type of printer that prints one line at a time in a single stroke. It is capable of printing at high speeds and is commonly used for bulk printing tasks. Dot matrix printers, on the other hand, use a matrix of small pins to create characters and can take multiple strokes to print a single line. Therefore, the correct answer is "लाइन प्रिंटर" as it can print a line in a single stroke.

not-available-via-ai

The correct answer is "डेटाबेस मैनेजमेंट सिस्टम" (Database Management System). This is the correct answer because DBMS stands for Database Management System, which is a software system that allows users to create, manage, and manipulate databases. It provides an interface for interacting with the database and ensures the efficient storage and retrieval of data.

The correct answer is "उपरोक्त सभी" which means "All of the above" in English. This answer suggests that all the types of printers mentioned in the options, namely पेज प्रिंटर (Page printer), कैरेक्टर प्रिंटर (Character printer), and लाइन प्रिंटर (Line printer), are printer types. Therefore, the correct answer is that all of these options are printer types.

The term used to describe the ability of an operating system to complete multiple tasks simultaneously is "मल्टी टास्किंग". This means that the operating system can handle multiple tasks or processes at the same time, allowing for efficient and concurrent execution of various tasks.

The correct answer is "मॉडेम". A modem is a device that both receives and transmits data, making it both an input and output device. It receives data from the internet service provider and transmits data from the computer to the internet.

A cathode ray tube (CRT) is a type of display technology that was commonly used in older monitors. It works by using an electron gun to emit a beam of electrons, which are then directed towards a phosphor-coated screen. The beam of electrons excites the phosphor, causing it to emit light and create the image on the screen. Therefore, the correct answer is Monitor as it is the device that uses a cathode ray tube.

The buffer that is used in the experiment between the CPU and main memory is called cache memory.

The correct answer is "वैक्यूम टूयूब". In the early generation of computers, vacuum tubes were used as electronic components to amplify and switch electronic signals. They were large, fragile, and consumed a lot of power, but they were the main technology used for electronic computing before the invention of transistors. Transistors replaced vacuum tubes in later generations of computers due to their smaller size, lower power consumption, and higher reliability.

The correct answer is "स्कैनर" (Scanner). A scanner is a device that is used to input text, images, etc. into a computer system. It works by converting physical documents or images into digital format, which can then be stored or manipulated on a computer.

As per the given options, the correct answer is "एसेम्बलर". In assembly language programming, the code is written using mnemonics and symbols which are then translated into machine language instructions by an assembler. Therefore, an assembler is used to translate programs written in assembly language into machine language.

The primary purpose of software is to manipulate data, and "इनफार्मेशन" (Information) is the correct answer as it accurately represents the process of transforming or modifying data. Websites, programs, and objects are all components or tools that can be used to manipulate data, but they are not the primary purpose of software itself.

The correct answer is "ट्रेक". In the context of data storage in a disk drive, a track refers to a concentric circle on the surface of the disk where data is written. Each track is divided into smaller units called sectors, and multiple tracks together form a cylinder. Therefore, the track is the specific part of the disk where data is written during the process of magnetic recording in a disk drive.

The given question is asking about the process of dividing a disk into tracks and sectors. The correct answer, "फोर्मेटिंग" (Formatting), refers to the process of preparing a disk for use by creating the necessary file system structures, such as the allocation table and directory structure, and dividing the disk into tracks and sectors. This process ensures that the disk can be organized and accessed efficiently by the operating system and applications.

The correct answer is "स्लॉट". In computer systems, a slot refers to a physical or virtual connector that allows for the expansion or connection of additional components or peripherals. It provides the ability to add or upgrade various hardware components such as graphics cards, sound cards, or network cards to enhance the functionality of the computer system.

EEPROM stands for Electrically Erasable Programmable Read-Only Memory. It is a type of non-volatile memory that can be electrically erased and reprogrammed. This means that the stored information in EEPROM can be easily erased and modified using electrical signals. Therefore, it is the only option among EPROM, PROM, and RAM that allows the removal of information through electrical signals. EPROM, PROM, and RAM do not have the capability to be electrically erased and reprogrammed.

The correct answer is "गणना" (calculation). In the context of ALU (Arithmetic Logic Unit), the primary function is to perform various arithmetic and logical operations on input data. It carries out calculations such as addition, subtraction, multiplication, and division. Therefore, "गणना" is the most appropriate answer as it represents the core function of an ALU.

The correct answer is "सेन्ट्रल प्रोसेसिंग यूनिट". This term refers to the Central Processing Unit (CPU), which is the main component of a computer that performs most of the processing inside the computer. It is responsible for executing instructions and performing calculations, making it the "brain" of the computer.

not-available-via-ai

The function of a register is to store data in the main memory.

RAID is not a compression program. RAID stands for Redundant Array of Independent Disks, which is a method of combining multiple physical disk drives into a single logical unit for the purpose of data redundancy, performance improvement, or both. It is used for data storage and management, not for compressing files. On the other hand, WinZip, PKZip, and WinRAR are all popular compression programs used to compress and decompress files and folders.

The correct answer is "कंट्रोल यूनिट" because the control unit in a computer is responsible for coordinating and controlling all the activities of the computer's components. It manages the flow of data and instructions between the different units, ensuring that they work together harmoniously to execute the desired tasks. Without the control unit, the computer would not be able to function properly as there would be no central control mechanism. Therefore, the control unit establishes harmony among all the components of the computer.

Clock speed is used to measure the processing speed of a processor. Clock speed refers to the number of cycles per second that the processor can execute. A higher clock speed means that the processor can execute more instructions in a given amount of time, resulting in faster processing speed. Therefore, in order to measure the processing speed of a processor, the clock speed is used.

The binary number system is based on the number 2. In this system, numbers are represented using only two digits, 0 and 1. Each digit in a binary number represents a power of 2, starting from the rightmost digit. The value of each digit is determined by multiplying the digit by the corresponding power of 2. Therefore, the correct answer is 2.

रेम (Random Access Memory) एक प्रकार की मेमोरी है जो कंप्यूटर के लिए उपयोग होती है और यह परिवर्तनशील (वोलेटाइल) होती है। यह इसलिए होता है क्योंकि रेम में संग्रहीत डेटा केवल जब तक कंप्यूटर को बिजली मिलती है तब तक ही स्थानांतरित होता है। जब कंप्यूटर को बिजली नहीं मिलती है, तो रेम में संग्रहीत डेटा गुम हो जाता है।

Before using a new device such as a printer or scanner attached to a computer, the driver should be installed in it.

The process of loading the operating system into the computer's memory is called "booting".

The correct answer is "पॉवर रहने तक ही रहता है". This is because the given statement suggests that the data stored in RAM remains intact only as long as the power is on. Once the power is turned off, the data stored in RAM is lost.

The correct answer is "कंट्रोल यूनिट". The control unit in a computer establishes coordination and communication between all the components of the computer system. It controls and directs the flow of data and instructions between the memory, ALU (Arithmetic Logic Unit), and other peripherals. The control unit ensures that instructions are executed in the correct sequence and manages the overall operation of the computer. It plays a crucial role in maintaining harmony and synchronization among all the components of the computer.

EEPROM stands for Electrically Erasable Programmable Read-Only Memory. Unlike other types of memory such as EPROM, PROM, and RAM, EEPROM can be easily erased and reprogrammed using electrical signals. This means that the stored information in EEPROM can be easily modified or removed by applying the appropriate electrical signals. Therefore, EEPROM is the correct answer as it is the only option that allows for the removal of information through electrical signals.

OMR stands for Optical Mark Recognition, which is a technology used to capture data from multiple choice questions or answer sheets. It involves the use of a special scanner that reads the marked areas on the sheet and converts them into digital data. OMR is commonly used in exams, surveys, and other forms where multiple choice responses need to be recorded and processed efficiently. OCR (Optical Character Recognition) is used to convert printed or written text into machine-readable text, while MICR (Magnetic Ink Character Recognition) is used for recognizing characters printed with magnetic ink. Therefore, OMR is the most suitable tool for checking multiple choice questions.

The group that only consists of output devices is "प्लोटर, प्रिंटर, मॉनिटर". A plotter is used to produce high-quality graphics and large-scale drawings, a printer is used to produce hard copies of documents or images, and a monitor is used to display visual output. All three devices are used for output purposes and do not input any data.

not-available-via-ai

Analog computers are designed to process continuous data and are best suited for tasks that involve complex mathematical calculations or simulations. They operate on physical quantities such as voltage, current, or pressure. In contrast, digital computers operate on discrete data and use binary code to process information. Since the question is asking about representing changes in temperature, which is a continuous variable, an analog computer would be more suitable for this task.

Clock speed is used to measure the processing speed of a processor. Clock speed refers to the number of cycles per second that a processor can execute. A higher clock speed indicates that the processor can perform more instructions in a given amount of time, resulting in faster processing. Therefore, clock speed is a crucial factor in determining the overall performance and speed of a processor.

The correct answer is Liquid Crystal Display. LCD stands for Liquid Crystal Display, which is a technology used in electronic displays to show images and videos. It consists of a layer of liquid crystals sandwiched between two transparent electrodes and two polarizing filters. When an electric current is applied, the liquid crystals align to allow or block light, creating the display. LCD technology is commonly used in televisions, computer monitors, smartphones, and other devices.

UPS stands for Uninterrupted Power Supply. It is a device that provides backup power to electrical systems in case of power outages or fluctuations. It ensures that the connected devices receive a continuous and uninterrupted power supply, preventing any disruption in their operation.

A computer works in a sequence of input, process, and output. First, it receives input from the user or from external devices. Then, it processes the input by performing calculations or executing instructions. Finally, it produces output by displaying the result or sending it to an output device. This sequence is the fundamental operation of a computer and is essential for its functioning.

The first generation of computers worked on the principle of "store program." This means that the instructions for the computer's operations were stored in the computer's memory along with the data. The computer would then fetch these instructions from memory and execute them one by one. This allowed for more flexibility and versatility in programming the computer, as different programs could be stored and executed without having to physically change the hardware. This concept of storing programs in memory became a fundamental principle in computer architecture and is still used in modern computers.

The question is asking which of the following is not an input device. The correct answer is "प्रिंटर" (printer). A printer is an output device, not an input device. It takes electronic data from a computer and generates a hard copy of it on paper or other media. Input devices, on the other hand, are used to provide data or instructions to a computer, such as scanners, mice, and keyboards.

Disk defragmentation is a process that improves the performance of a hard disk by rearranging fragmented data. When data is stored on a hard disk, it is often scattered in different locations, which can slow down the disk's performance. Disk defragmentation rearranges the fragmented data so that it is stored in contiguous blocks, making it easier and faster for the disk to access the data. This process helps to reduce the time taken to read and write data from the hard disk, thereby improving its performance.

The correct answer is (अ) व (स) दोनों (Both). The CPU's main function is to execute program instructions and process data and information. It performs operations on data according to the instructions provided by the program, ensuring the effective and secure utilization of data. Therefore, both options (प्रोग्राम अनुदेशों पर अमल करना and डाटा और जानकारी प्रोसेस करना) accurately describe the primary tasks of a CPU.

The given question asks for the term used to describe a number or string that is given to a function. The correct answer is "आर्गुमेंट" which translates to "argument" in English. In programming, an argument is a value that is passed to a function when it is called, and the function can then use this value to perform its operations.

When multiple tasks are given to a computer and they are processed one by one, it is called batch processing mode. In this mode, the computer executes a series of tasks without any user interaction. This mode is commonly used for processing large amounts of data or running repetitive tasks. It allows for efficient utilization of computer resources and can be automated to save time and effort.

not-available-via-ai

The correct answer is "लेजर प्रिंटर" (Laser Printer). This is because a laser printer is a type of non-impact printer that uses laser technology to produce high-quality prints. It works by using a laser beam to create an electrostatic image on a drum, which is then transferred onto paper using heat and pressure. Unlike impact printers such as dot matrix or daisy wheel printers, laser printers do not physically strike the paper to create an image, making them quieter and faster.

The correct answer is "मिड रेंज कंप्यूटरर्स". This is because "मिड रेंज कंप्यूटरर्स" translates to "mid-range computers" in English, which refers to computers that fall between high-end and low-end in terms of performance and price. The other options, "पर्सनल डिजिटल कंप्यूटरर्स" (personal digital computers), "मेनफ्रेम कंप्यूटरर्स" (mainframe computers), and "लेपटॉप कंप्यूटरर्स" (laptop computers), do not accurately describe mini computers.

The correct answer is "टॉगल की". In the context of the given question, a "टॉगल की" refers to a button that is used to toggle or switch on/off a feature or function. It is commonly used in user interfaces to control the state of a specific feature or action.

The correct answer is "लार्ज स्केल इंटिग्रेटेड सर्किट". In the context of the question, it is asking about the use of a certain technology in computers of the fourth generation. The term "लार्ज स्केल इंटिग्रेटेड सर्किट" refers to large-scale integrated circuits, which were a key technological advancement in fourth-generation computers. These integrated circuits allowed for more complex and powerful computer systems to be built, leading to significant advancements in computing capabilities.

The correct answer is Structured Query Language. SQL stands for Structured Query Language, which is a programming language used for managing and manipulating relational databases. It is used to create, modify, and retrieve data from databases, as well as perform various operations such as inserting, updating, and deleting data. SQL is widely used in the field of data management and is considered the standard language for interacting with relational databases.

चुम्बकीय स्याही (Magnetic Ink Character Recognition - MICR) का उपयोग बैंक और वित्तीय संस्थानों में चेक प्रोसेसिंग के लिए किया जाता है। यह विशेष रूप से चेक के नंबर, खाता संख्या और अन्य महत्वपूर्ण जानकारी को पढ़ने और प्रोसेस करने के लिए इस्तेमाल की जाती है।

The important function of output devices is to display or show the results or information to the user. These devices are responsible for presenting the processed data or instructions in a format that can be easily understood by the user. They can include devices such as monitors, printers, speakers, etc.

The correct answer is "हार्ड डिस्क" (Hard Disk). A hard disk is a permanent storage device used to store and retrieve digital information. It is a non-volatile storage medium that retains data even when the computer is turned off. Unlike RAM (रेम) which is a temporary storage device, a hard disk provides long-term storage for files, applications, and the operating system. Monitors (मॉनिटर) are output devices used to display visual information, while cache (कैश) is a temporary storage area used to store frequently accessed data for faster retrieval.

The function keys are used in combination with other keys to perform certain tasks or shortcuts. In this case, the question is asking which keys are used to create shortcuts. "कोम्बिनेशन कीज" translates to "combination keys" in English, which suggests that using a combination of keys is the correct answer for creating shortcuts.

The control unit is responsible for giving instructions to all units of a computer system. It is the component that coordinates and manages the activities of all other units, including the CPU and ALU. Therefore, the correct answer is "कंट्रोल यूनिट" (Control Unit).

The term "multiprocessing" refers to the use of multiple processors or central processing units (CPUs) in a computer system. It involves the simultaneous execution of multiple processes or tasks, where each process or task is assigned to a separate processor for parallel processing. This allows for improved performance and efficiency in handling complex computational tasks.

The main use of plotters is in graph work. Plotters are devices that are used to create high-quality, precise graphs and diagrams. They are commonly used in engineering, architecture, and design fields where accurate and detailed graphs are required. Plotters are capable of producing large-scale graphs with precise lines and colors, making them ideal for creating professional-looking graphs and charts.

फाइल कम्प्रेशन का प्रयोग स्टोरेज की कम जगह में बहुत सी फाइलें स्टोर करने के लिए किया जा सकता है। यह एक प्रक्रिया है जिसमें फाइलों का आकार कम किया जाता है ताकि इसे कम स्टोरेज स्पेस में स्टोर किया जा सके। यह फाइलों को एक संकुचित रूप में संग्रहित करता है, जिससे फाइलों की आवश्यक स्थान की मात्रा कम होती है।

Transistors were used in computers of the second generation.

not-available-via-ai

डिस्क क्लीनअप यूटिलिटी हार्ड डिस्क पर मौजूद अनावश्यक फाइलों को पहचानती है और उपयोगकर्ता द्वारा निर्देशित करने पर उन्हें मिटा देती है। यह उपयोगकर्ताओं को अतिरिक्त डिस्क स्पेस बचाने में मदद करता है और सिस्टम की प्रदर्शन को बेहतर बनाने में मदद करता है।

not-available-via-ai

The question asks which storage medium is used for permanent memory in a computer. The options given are floppy disk, tape-magnetic, hard disk, and all of the above. The correct answer is "all of the above" because all of these storage mediums can be used for permanent memory in a computer. Floppy disks, tape-magnetic, and hard disks are all types of storage devices that can be used to store data permanently in a computer. Therefore, the correct answer is "all of the above".

The correct answer is "उपरोक्त सभी" because all of the mentioned options (ओ.एम.आर., ओ.सी.आर., ट्रेकबाँल) are input devices.

An icon is a graphical object that is used to display and open applications. Icons are commonly used in user interfaces to represent different functions or programs. They provide a visual representation of an application and allow users to easily identify and access it. In this context, icons are used to display and open applications in an application.

The correct answer is "कंट्रोल यूनिट व एएलयू" because the control unit and ALU (Arithmetic Logic Unit) are both essential components of a computer processor. The control unit is responsible for managing and coordinating the activities of the other units within the processor, while the ALU performs arithmetic and logical operations on the data. These two components work together to execute instructions and perform calculations, making them integral parts of a computer's processing capabilities.

The correct answer is "Compact Disk-rewritable". CD-RW stands for Compact Disk-rewritable, which refers to a type of compact disk that can be written, erased, and rewritten multiple times. Unlike CD-ROMs (Compact Disk, Read-only Memory), which can only be read and not written to, CD-RWs provide the flexibility to store and modify data as needed.

The correct answer is "बार कोड्स". Bar codes are printed lines or patterns that are used for product identification and tracking in retail and other industries. They contain information about the product such as its price, manufacturer, and stock keeping unit (SKU) number. Bar codes are scanned using a barcode scanner to retrieve the information encoded in them.

The development of the first microprocessor chip was done by Intel Corporation.

OCR stands for Optical Character Recognition. It is a technology that allows machines to read printed characters. OCR software uses algorithms to analyze the shapes and patterns of characters in a scanned image or document and convert them into machine-readable text. This technology is commonly used in various applications such as scanning documents, converting printed text into digital format, and extracting data from printed forms. OCR enables efficient and accurate digitization of printed text, making it easier to process and analyze large volumes of information.

स्थाई मेमोरी के लिए कंप्यूटर में उपरोक्त सभी का प्रयोग किया जाता है। फ्लोपी डिस्क, टेप-चुम्बकिय, और हार्ड डिस्क सभी मेमोरी स्थानों के रूप में कंप्यूटर में प्रयोग होते हैं।

The answer is बी.सी.आर. because it is the correct abbreviation for Braille, which is a system of raised dots that can be felt with the fingertips and used by people who are blind or visually impaired to read and write. Braille is used to represent the lines and empty spaces on paper for reading purposes.

The correct answer is "पेरीफेरल". पेरीफेरल डिवाइसेस को ऐसे बाहरी उपकरण कहा जाता है जो कंप्यूटर के साथ काम करते हैं और उनके फंक्शन को पूरा करने में मदद करते हैं। इनमें प्रिंटर, कीबोर्ड, माउस, मॉडेम आदि शामिल हो सकते हैं। ये डिवाइसेस कंप्यूटर को इनपुट और आउटपुट के लिए इंटरफेस प्रदान करती हैं।

चुम्बकीय स्याही के अक्षरों को पढ़ने के लिए एम.आई.सी.आर. का प्रयोग किया जाता है।

not-available-via-ai

The correct answer is "लाइनिक्स". This is because Linux is a multi-user operating system that allows multiple users to access and use the system simultaneously.

वेनचेस्टर डिस्क को हार्ड डिस्क को कहा जाता है।

Regular processing refers to the method of data processing that is performed on a regular basis or at regular intervals. It involves executing a set of predefined tasks or operations on a specific schedule. This type of processing is typically used for routine or repetitive tasks that do not require immediate or real-time processing. Regular processing can be automated and scheduled to occur at specific times, such as daily, weekly, or monthly. It is different from online processing, batch processing, and distributed processing, which have their own distinct characteristics and purposes.

BIOS stands for Basic Input Output System. It is a firmware that is built into the computer's motherboard. It is responsible for initializing and testing the hardware components of the computer during the boot process. It also provides the interface between the operating system and the computer's hardware, allowing the operating system to communicate with the hardware devices. Therefore, the correct answer is "बेसिक इनपुट आउटपुट सिस्टम" (Basic Input Output System).

The Pascaline, invented by Blaise Pascal in 1642, is considered to be the first mechanical computer. It was a mechanical calculator that could perform addition and subtraction. It used a series of gears and wheels to manipulate numbers and display the results. The Pascaline was a significant advancement in computing technology and laid the foundation for future developments in the field.

The correct answer is "इन्टरप्रेटर". An interpreter is a software program that translates high-level language code into machine language line by line. It executes the code line by line and immediately provides the output or error messages. Unlike compilers, which translate the entire code into machine language before execution, interpreters translate and execute the code simultaneously. Therefore, an interpreter is the correct answer for the given question.

The correct answer is "डेटाबेस एडमिनिस्ट्रेटर" which translates to "Database Administrator" in English. This term refers to a person who manages and maintains a database system, including tasks such as designing, implementing, and troubleshooting databases.

The process of finding errors in software code is called debugging.

not-available-via-ai

not-available-via-ai