Bathing And Drying Skills
-
Be sure the high-pressure airflow does not fold the coat onto itself, causing “whip knots,” which are hard to remove later.
-
True
-
False
-
About This Quiz
This quiz assesses knowledge on bathing and drying techniques specific to different dog coat types. It covers the use of conditioners, drying methods, and the importance of understanding coat characteristics to prevent damage and maintain proper coat health.
Quiz Preview
- 2.
A dog should be shampooed 4 times to get it squeaky clean.
-
True
-
False
Correct Answer
A. FalseExplanation
The statement suggests that a dog should be shampooed 4 times to get it squeaky clean. However, this is not necessarily true. The number of times a dog should be shampooed depends on various factors such as the breed, coat type, and overall cleanliness of the dog. Some dogs may require more frequent shampooing, while others may need less. Therefore, the statement is false as there is no fixed number of times a dog should be shampooed to achieve cleanliness.Rate this question:
-
- 3.
To get a quality finish on long coated breeds, the coat needs to be as straight as possible.
-
True
-
False
Correct Answer
A. TrueExplanation
To achieve a quality finish on long coated breeds, it is necessary for the coat to be as straight as possible. This is because straight hair is easier to groom and maintain, resulting in a more polished appearance. Straight hair also allows for better visibility and definition of the breed's natural features and structure. Curly or tangled hair can make grooming difficult and may hide the true beauty of the coat. Therefore, it is important to ensure that the coat is straight in order to achieve a high-quality finish on long coated breeds.Rate this question:
-
- 4.
It is easier to dematt a clean coat than a dirty coat.
-
True
-
False
Correct Answer
A. TrueExplanation
When a coat is clean, there are no tangles or knots in the fabric, making it easier to brush or comb through and remove any potential mats. On the other hand, a dirty coat is more likely to have debris, dirt, or oils that can contribute to matting. These substances can make the coat stick together, making it more difficult to dematt without causing discomfort or pain to the animal. Therefore, it is true that it is generally easier to dematt a clean coat than a dirty coat.Rate this question:
-
- 5.
A conditioner used on a wire coated breed will soften the coat and that is desirable for this coat type.
-
True
-
False
Correct Answer
A. FalseExplanation
False. A conditioner used on a wire coated breed will not soften the coat, but rather it will make it more wiry and maintain its texture. Wire coated breeds have a specific type of coat that is meant to be harsh and wiry, so softening the coat would be undesirable. The correct answer is False.Rate this question:
-
- 6.
A high Velocity dryer gives us a clear picture of the dogs skin.
-
True
-
False
Correct Answer
A. TrueExplanation
A high Velocity dryer is designed to blow air at a high speed, which helps to remove loose hair and dry the dog's coat quickly. This strong airflow also helps to lift and separate the fur, allowing us to see the dog's skin more clearly. Therefore, it is true that a high Velocity dryer gives us a clear picture of the dog's skin.Rate this question:
-
- 7.
Be sure the high-pressure airflow does not fold the coat onto itself, causing “whip knots,” which are hard to remove later.
-
True
-
False
Correct Answer
A. TrueExplanation
The given statement is true because if the high-pressure airflow folds the coat onto itself, it can create "whip knots" which are difficult to remove later. This suggests that it is important to ensure that the coat does not get folded or tangled during the high-pressure airflow process.Rate this question:
-
- 8.
Breeds that require a curly or wavy coat when grooming is finished, are the Irish Water Spaniel, Portuguese Water Dog, and Kerry Blue Terrier.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement is true because the breeds mentioned, Irish Water Spaniel, Portuguese Water Dog, and Kerry Blue Terrier, all have a specific grooming requirement of a curly or wavy coat. This means that when grooming is finished, their coats should have a curly or wavy texture.Rate this question:
-
- 9.
Double coated is a combination of straight and short to moderate length. Outer guard coat is harsh to the touch, while abundant soft down undercoat is thick and dense to protect dog in extreme weather conditions.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement describes the characteristics of a double coated dog. It states that the outer guard coat of a double coated dog is harsh to the touch, while the undercoat is thick and dense to protect the dog in extreme weather conditions. This is true for many double coated breeds, as the outer coat provides protection from the elements and the undercoat acts as insulation.Rate this question:
-
- 10.
For Curly and Wavy coats, in order to get a quality result in the final trim, an inactive drying method must be used to add body to the coat.
-
True
-
False
Correct Answer
A. FalseExplanation
To achieve a quality result in the final trim for Curly and Wavy coats, an active drying method should be used instead of an inactive one. An active drying method helps to add body to the coat, ensuring a better outcome in the final trim.Rate this question:
-
- 11.
For most coat types, start with a vigorous hand towel dry followed by high velocity drying to remove excess moisture.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement suggests that for most coat types, it is recommended to start the drying process by vigorously towel drying the coat to remove excess moisture. This is followed by using high velocity drying to further remove any remaining moisture. The answer "True" indicates that the statement is correct and this is the recommended method for drying most coat types.Rate this question:
-
- 12.
For wire coated breeds, card and hand strip dog the before bathing and drying.
-
True
-
False
Correct Answer
A. TrueExplanation
Wire coated breeds, such as the Airedale Terrier or the Wire Fox Terrier, require a specific grooming technique called carding and hand stripping. This process involves removing dead hair from the coat by hand, which helps to maintain the proper texture and appearance of the wire coat. It is recommended to perform this grooming procedure before bathing and drying the dog, as it allows for better results and prevents the wire coat from becoming matted or damaged. Therefore, the statement "True" is correct.Rate this question:
-
- 13.
Shampoo can be left under the grooming lead. Make sure to double check this area.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement suggests that it is possible to leave shampoo under the grooming lead. The instruction advises to double check this area, indicating that it is a common occurrence. Therefore, the correct answer is true.Rate this question:
-
- 14.
If light matting is left in the coat, the coat can be de-matted and stretch dried at the same time.
-
True
-
False
Correct Answer
A. TrueExplanation
If light matting is left in the coat, it means that there are small tangles or knots in the fur. The statement suggests that these mats can be removed and the coat can be dried at the same time. This implies that there is a technique or process that allows for both tasks to be done simultaneously. Therefore, the statement "True" indicates that it is possible to de-mat the coat and dry it at the same time, saving time and effort.Rate this question:
-
- 15.
Long coat between feet and pads has a tendency to mat and collect dirt and debris.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement is true because long coats between the feet and pads of animals can easily become tangled and collect dirt and debris. This can lead to discomfort for the animal and increase the risk of infections or other health issues. Regular grooming and maintenance of this area is necessary to prevent matting and keep the feet and pads clean and healthy.Rate this question:
-
- 16.
It is easier to dematt a clean coat than a dirty coat.
-
True
-
False
Correct Answer
A. TrueExplanation
A clean coat is easier to dematt because there are no tangles or knots present. Dirt and debris can make the coat more difficult to comb through, resulting in more effort and potentially causing discomfort to the animal. Therefore, it is true that it is easier to dematt a clean coat than a dirty coat.Rate this question:
-
- 17.
On short coated breeds, a natural bristle scrub works very well on the coat, especially around the feet and legs.
-
True
-
False
Correct Answer
A. TrueExplanation
A natural bristle scrub is effective on short coated breeds, particularly on the coat around the feet and legs. The bristles of the scrub can easily penetrate the short hair, providing a thorough cleaning and removing any dirt or debris. This tool is specifically designed for short coats, allowing for easy grooming and maintenance. Therefore, the statement is true.Rate this question:
-
- 18.
Once the pet is cool/damp, finish drying by “stretch drying” or “fluff drying” with a heated stand dryer while brushing the coat by hand.
-
True
-
False
Correct Answer
A. TrueExplanation
The explanation for the given correct answer is that once the pet is cool/damp, it is recommended to finish drying by "stretch drying" or "fluff drying" with a heated stand dryer while brushing the coat by hand. This method helps to ensure that the pet's coat is thoroughly dried and prevents any moisture from remaining, which could lead to skin issues or discomfort for the pet. Therefore, the statement "True" is correct.Rate this question:
-
- 19.
A high velocity dryer runs about 10-15 degrees above the room temperature.
-
True
-
False
Correct Answer
A. TrueExplanation
A high velocity dryer runs about 10-15 degrees above the room temperature because the dryer's motor generates heat while running, causing the air inside the dryer to become warmer than the surrounding room temperature.Rate this question:
-
- 20.
A curry brush is the proper brush to remove coat from a smooth coated dog.
-
True
-
False
Correct Answer
A. TrueExplanation
A curry brush is designed specifically for removing loose hair and debris from the coat of a smooth-coated dog. Its bristles are usually short and stiff, allowing for effective grooming without causing any discomfort or damage to the dog's skin. Other types of brushes, such as slicker brushes or pin brushes, may be more suitable for dogs with longer or thicker coats. Therefore, using a curry brush is indeed the correct choice for removing coat from a smooth-coated dog.Rate this question:
-
- 21.
To get a quality finish on long coated breeds, the coat needs to be as straight as possible.
-
True
-
False
Correct Answer
A. TrueExplanation
In order to achieve a high-quality finish on long coated breeds, it is important for the coat to be as straight as possible. This is because a straight coat allows for better definition and presentation of the dog's features, enhancing its overall appearance. Straight hair also tends to be easier to groom and maintain, ensuring that the coat remains in optimal condition. Therefore, the statement "To get a quality finish on long coated breeds, the coat needs to be as straight as possible" is true.Rate this question:
-
- 22.
Whatever process or combination of processes is used, drying is not complete until the coat is completely cool and dry to the touch.
-
True
-
False
Correct Answer
A. TrueExplanation
The statement suggests that drying is not considered complete until the coat is completely cool and dry to the touch, regardless of the method or methods used in the process. This implies that simply removing moisture from the coat is not sufficient, as the coat must also reach a cool and dry state. Therefore, the answer "True" indicates that the statement is correct.Rate this question:
-
- 23.
When stretch drying, work only in the area where the air is striking and make your brush strokes light and rapid.
-
True
-
False
Correct Answer
A. TrueExplanation
When stretch drying, it is important to only work in the area where the air is striking. This means that the brush strokes should be focused on the part of the surface that is directly exposed to the airflow. Additionally, the brush strokes should be light and rapid, which helps to evenly distribute the drying process and prevent any uneven drying or damage to the surface being worked on. Therefore, the statement is true.Rate this question:
-
Quiz Review Timeline (Updated): Mar 21, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Mar 18, 2014Quiz Created by
ParagonAdmin
Back to top