Drill Press Safety

10 Questions | Attempts: 279
Please wait...
Question 1 / 11
🏆 Rank #-- ▾
Score 0/100

1. It is important to select the proper speed for the drill size being used

Submit
Please wait...
About This Quiz
Drill Press Safety - Quiz

Drill press safety test

2.

What first name or nickname would you like us to use?

You may optionally provide this to label your report, leaderboard, or certificate.

2.  Work should always be secured to table.

Submit

3. A chip brush should be used for removing wood or metal chips.

Submit

4. Long hair, clothing and loose jewelry must be confined (tied up, pulled back.

Submit

5. You must have permission from your instructor before using this or any other machine inthe classroom.

Submit

6. The drill should be operated at top speed for all work.

Submit

7. The long end of the work should be to the left of the operator

Submit

8. The chuck key should be kept in the chuck at all times

Submit

9.   Changes in drill speeds must be made only when the machine is turned off.

Submit

10. When drilling metal, a pilot hole is not required until the hole size is larger than 3/4 of an inch

Submit
×
Saved
Thank you for your feedback!
View My Results
Cancel
  • All
    All (10)
  • Unanswered
    Unanswered ()
  • Answered
    Answered ()
It is important to select the proper speed for the drill size being...
 Work should always be secured to table.
A chip brush should be used for removing wood or metal chips.
Long hair, clothing and loose jewelry must be confined (tied up,...
You must have permission from your instructor before using this or any...
The drill should be operated at top speed for all work.
The long end of the work should be to the left of the operator
The chuck key should be kept in the chuck at all times
  Changes in drill speeds must be made only when the machine is...
When drilling metal, a pilot hole is not required until the hole size...
play-Mute sad happy unanswered_answer up-hover down-hover success oval cancel Check box square blue
Alert!