4. Which one of the following is applicable?

The centreline of the lap belt at the seat bottom placed at 2.7 inches forward of the seat back to seat bottom junction.

A head restraint padded with an energy absorbing material with a thickness of 30mm.

Throttle position sensor as a return spring

The driver and anyone standing outside the car must be shielded from any hydraulic pumps and lines with pressures of 200 psi or higher.

6. Select the correct option. STATEMENT 1: The Add Item request is the only time receipts will be needed for the Cost Event. STATEMENT 2: The executive summary must not exceed 2 pages. STATEMENT 3: Systems that include driver displays or other vehicle control functionality will have the cost of those features included in the total vehicle cost. STATEMENT4: All drivers have to wear underwear (long pants and long sleeve t-shirt) certified to SFI 3.3 or FIA 8856-2000

Statement 1 and 4 are incorrect

FSG RBQ KT 1

Approved & Edited by ProProfs Editorial Team

The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.

Learn about Our Editorial Process

| By Prvmarketing2014

Prvmarketing2014

Community Contributor

Quizzes Created: 18 | Total Attempts: 3,781

Questions: 10 | Attempts: 196 | Updated: Mar 21, 2023

Questions

Settings

Create your own Quiz

Share on Facebook Share on Twitter Share on Whatsapp Share on Pinterest Share on Email Copy to Clipboard Embed on your website

Questions and Answers

1.

1. Suppose there are ‘E’ and ‘e’ used in the university name. If the vertical height of ‘E’ is 2.5 inches what will be the vertical height of ‘e’?
- A.
  
  42.33mm
- B.
  
  31.75mm
- C.
  
  1.5 inch
- D.
  
  2 inch
Correct Answer
A. 42.33mm

Explanation
Based on the given information, it is stated that the vertical height of 'E' is 2.5 inches. The question asks for the vertical height of 'e'. Since the uppercase 'E' and lowercase 'e' are used in the university name, it can be inferred that the lowercase 'e' would have a smaller vertical height compared to the uppercase 'E'. The answer of 42.33mm suggests that the lowercase 'e' would have a vertical height of 42.33mm.

Rate this question:
2.

2. Select the correct option. STATEMENT 1: The car must be equipped with a red brake light having a minimum shinning surface of at least 10sq. cm. STATEMENT 2: Only outboard brakes are allowed. STATEMENT3: The brake pedal shall be designed to withstand a force of 2000 N without any failure of the brake system or pedal box.
- A.
  
  Statement 2and 3 are incorrect
- B.
  
  Statement 2 and 3 are correct
- C.
  
  Statement 3 is correct
- D.
  
  None
Correct Answer
C. Statement 3 is correct

Explanation
The correct answer is that Statement 3 is correct. This is because the statement states that the brake pedal shall be designed to withstand a force of 2000 N without any failure of the brake system or pedal box. This means that the brake pedal must be able to handle a force of 2000 N without breaking or causing any failure in the brake system.

Rate this question:
3.

3. What is the minimum thickness of the roll bar padding?
- A.
  
  12 mm
- B.
  
  1 inch
- C.
  
  24.5mm
- D.
  
  10mm
Correct Answer
A. 12 mm

Explanation
The minimum thickness of the roll bar padding is 12 mm. This means that the padding should be at least 12 mm thick to meet the safety requirements for roll bars. A thicker padding provides better protection in case of an accident or collision, reducing the risk of injury to the occupants of the vehicle.

Rate this question:
4.

4. Which one of the following is applicable?
- A.
  
  A head restraint padded with an energy absorbing material with a thickness of 30mm.
- B.
  
  Throttle position sensor as a return spring
- C.
  
  The driver and anyone standing outside the car must be shielded from any hydraulic pumps and lines with pressures of 200 psi or higher.
- D.
  
  The centreline of the lap belt at the seat bottom placed at 2.7 inches forward of the seat back to seat bottom junction.
Correct Answer
D. The centreline of the lap belt at the seat bottom placed at 2.7 inches forward of the seat back to seat bottom junction.
5.

5.What is the maximum outer diameter allowed for jacking bar?
- A.
  
  29mm
- B.
  
  25mm
- C.
  
  1 inch
- D.
  
  32mm
Correct Answer
A. 29mm

Explanation
The maximum outer diameter allowed for a jacking bar is 29mm.

Rate this question:
6.

6. Select the correct option. STATEMENT 1: The Add Item request is the only time receipts will be needed for the Cost Event. STATEMENT 2: The executive summary must not exceed 2 pages. STATEMENT 3: Systems that include driver displays or other vehicle control functionality will have the cost of those features included in the total vehicle cost. STATEMENT4: All drivers have to wear underwear (long pants and long sleeve t-shirt) certified to SFI 3.3 or FIA 8856-2000
- A.
  
  Statement 2 is incorrect
- B.
  
  Statement 2 and 3 are correct
- C.
  
  Statement 1 and 4 are incorrect
- D.
  
  All statements are correct
Correct Answer
A. Statement 2 is incorrect

Explanation
The correct answer is that Statement 2 is incorrect. This means that the executive summary can exceed 2 pages. The other statements are not mentioned in the explanation, so we cannot determine their correctness based on the given information.

Rate this question:
7.

7. Vehicles whose fuel volume exceeds V litre/km, will receive zero (0) points for fuel efficiency. What is the value of V?
- A.
  
  26
- B.
  
  0.17
- C.
  
  32
- D.
  
  0.26
Correct Answer
D. 0.26

Explanation
Vehicles whose fuel volume exceeds V litre/km will receive zero points for fuel efficiency. The value of V is 0.26. This means that any vehicle that consumes more than 0.26 liters of fuel per kilometer will not be considered fuel-efficient and will receive zero points.

Rate this question:
8.

8. What should be the load required in the structural requirement for front roll hoop in (y,z,x) axes as per alternative frame rules?
- A.
  
  6kN, 5kN, 9kN
- B.
  
  6kN, 5kN, -9kN
- C.
  
  5kN,-9kN, 6kN
- D.
  
  9kN, 5kN, -6kN
Correct Answer
C. 5kN,-9kN, 6kN
9.

9. Low pressure fuel injection systems are those functioning at a pressure below
- A.
  
  10 N/mm2
- B.
  
  1 N/mm2
- C.
  
  20 N/mm2
- D.
  
  2 N/mm2
Correct Answer
B. 1 N/mm2

Explanation
Low pressure fuel injection systems are those that operate at a pressure below 1 N/mm2. This means that the fuel is injected into the engine at a relatively low pressure. These systems are typically found in older vehicles or vehicles with smaller engines. The lower pressure allows for a slower, more controlled delivery of fuel, which can help improve fuel efficiency and reduce emissions. Additionally, low pressure systems are generally simpler and less expensive compared to high pressure systems.

Rate this question:
10.

10. Multiple panels must not be used to form the firewall.
- A.
  
  True
- B.
  
  False
Correct Answer
B. False

Explanation
Using multiple panels to form a firewall is not a problem or a violation. In fact, it is common practice to use multiple panels to construct a firewall. Multiple panels can be joined together to create a larger and more robust firewall system. Therefore, the statement that multiple panels must not be used to form the firewall is incorrect.

Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
Mar 21, 2023

Quiz Edited by
ProProfs Editorial Team
Jan 12, 2014

Quiz Created by
Prvmarketing2014

FSG Rbq Kt 1

1. Suppose there are ‘E’ and ‘e’ used in the university name. If the vertical height of ‘E’ is 2.5 inches what will be the vertical height of ‘e’?

3. What is the minimum thickness of the roll bar padding?

4. Which one of the following is applicable?

5.What is the maximum outer diameter allowed for jacking bar?

7. Vehicles whose fuel volume exceeds V litre/km, will receive zero (0) points for fuel efficiency. What is the value of V?

8. What should be the load required in the structural requirement for front roll hoop in (y,z,x) axes as per alternative frame rules?

9. Low pressure fuel injection systems are those functioning at a pressure below

10. Multiple panels must not be used to form the firewall.