End Of Term - Year 10

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
Learn about Our Editorial Process
| By Aic
A
Aic
Community Contributor
Quizzes Created: 5 | Total Attempts: 796
Questions: 30 | Attempts: 119

SettingsSettingsSettings
End Of Term - Year 10 - Quiz

.


Questions and Answers
  • 1. 

    Practical Question:Use SketchUp to create an image similar to the one below :When done , go to File ---  Export  ----  2D Graphic  (your image will be a png file)Then Upload the image to finish the question. Your name should be clearly visible in the file  

  • 2. 

    To use of the Follow me tool you only need a path.

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    The statement is false because to use the Follow me tool, you not only need a path but also a profile. The Follow me tool is used in 3D modeling software to create shapes by extruding a profile along a path. The profile determines the shape of the object, while the path determines the path along which the object will be extruded. Therefore, both a path and a profile are required to use the Follow me tool effectively.

    Rate this question:

  • 3. 

    The default number of sides when drawing a circle is 24.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    When drawing a circle, the default number of sides is 24. This means that when a circle is created, it is actually approximated by a polygon with 24 sides. The more sides a polygon has, the closer it resembles a circle. Therefore, the statement is true as the default number of sides for drawing a circle is indeed 24.

    Rate this question:

  • 4. 

    The rectangle tool can only be found in the Large Tool Set.

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    The given statement is false because the rectangle tool can be found in both the Large Tool Set and the Small Tool Set.

    Rate this question:

  • 5. 

    The Offset tool is used to make a smaller or bigger shapes

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    The Offset tool is used to create a parallel copy of a shape, either smaller or larger, by specifying a distance from the original shape. This can be useful in various design applications, such as creating borders or outlines around objects, adding thickness to lines, or creating concentric shapes. Therefore, the statement "The Offset tool is used to make smaller or bigger shapes" is true.

    Rate this question:

  • 6. 

    Follow me tool is an advanced tool.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    The statement suggests that the "Follow me" tool is an advanced tool. This implies that it is more sophisticated or complex compared to other tools. The answer is true because it confirms the statement's claim that the "Follow me" tool is indeed advanced.

    Rate this question:

  • 7. 

    To make a copy of an object while using the move tool, Hold the SHIFT key.

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    To make a copy of an object while using the move tool, you do not need to hold the SHIFT key. This means that the statement is incorrect.

    Rate this question:

  • 8. 

    Inferring is the ability for SketchUp to line up two edges.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    Inferring is a fundamental feature in SketchUp that allows users to align or snap two edges together. This feature helps in creating accurate and precise 3D models by automatically aligning edges, faces, or points based on their proximity or relationship to other geometry. With inferring, users can easily connect and align different elements of their design, making the modeling process more efficient and intuitive. Therefore, the statement that inferring is the ability for SketchUp to line up two edges is true.

    Rate this question:

  • 9. 

    Curved line are made up of connected straight circles.

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    Curved lines are not made up of connected straight circles. Curved lines are smooth and continuous, while circles are made up of straight lines connected at specific angles. Therefore, the statement is false.

    Rate this question:

  • 10. 

    Drawing in Sketchup is always approximate, it is not possible to draw to a specific length.

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    This statement is incorrect. In Sketchup, it is possible to draw to a specific length. Sketchup provides tools and features that allow users to input precise dimensions and measurements for their drawings. Therefore, the statement that drawing in Sketchup is always approximate and not possible to draw to a specific length is false.

    Rate this question:

  • 11. 

    The letter R , is the short cut to use the Rotate  tool

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    The statement is false because the shortcut to use the Rotate tool is not the letter R. The correct shortcut for the Rotate tool may vary depending on the software or program being used.

    Rate this question:

  • 12. 

    Which tool is used to move around an object with no rotation?  (Enter the label number)

    Correct Answer
    15,15
    Explanation
    The given answer "15,15" suggests that the tool used to move around an object with no rotation is the coordinate point (15,15). This means that the object is being moved horizontally and vertically by 15 units each, without any rotation.

    Rate this question:

  • 13. 

    Which tool is used to move around an object with rotation?  (Enter the label number)

    Correct Answer
    14,14
    Explanation
    The tool labeled as 14,14 is used to move around an object with rotation.

    Rate this question:

  • 14. 

    Which tool is used to create a smaller shape of an existing shape? (Enter the label number) 

    Correct Answer
    7, 07,7
    Explanation
    The correct answer is 7, 07,7. This answer suggests that the tool used to create a smaller shape of an existing shape is labeled as 7, 07,7.

    Rate this question:

  • 15. 

    Which tool is used to add depth or height to an object?  (Enter the label number)

    Correct Answer
    6,06
    Explanation
    The correct answer is 6,06. This answer suggests that the tool used to add depth or height to an object is labeled as 6,06.

    Rate this question:

  • 16. 

    Which tool is used to draw a rectangle on the stage?  (Enter the label number)

    Correct Answer
    5,05
    Explanation
    The given answer, 5,05, suggests that the tool used to draw a rectangle on the stage is located at label number 5,05. However, without further context or information about the specific software or program being referred to, it is difficult to provide a more detailed explanation.

    Rate this question:

  • 17. 

    Which tool is used to help make your drawing more realistic?  (Enter the label number)

    Correct Answer
    13,13
  • 18. 

    Which tool is used to target and expand a specific area by zooming-in or out?  (Enter the label number) 

    Correct Answer
    16,16
    Explanation
    The given answer, 16,16, refers to the tool that is used to target and expand a specific area by zooming in or out. This answer implies that label number 16 represents the tool being referred to in the question.

    Rate this question:

  • 19. 

     Which tool is used to draw a segment of a circle?  (Enter the label number) 

    Correct Answer
    4,04
    Explanation
    The given answer, 4,04, suggests that tool number 4 is used to draw a segment of a circle. The number 04 could be a specific option or label assigned to this tool in a given context or reference. However, without further information or context, it is difficult to determine the exact tool being referred to.

    Rate this question:

  • 20. 

    Which tool is used to measure distance or length in your model? (Enter the label number) 

    Correct Answer
    11,11
  • 21. 

    ​Which tool is active in the image?  

    • A.

      Push-pull

    • B.

      Slection

    • C.

      Offset

    • D.

      Move

    Correct Answer
    A. Push-pull
    Explanation
    The tool that is active in the image is the Push-pull tool. This tool allows the user to extrude or push and pull the surface of a 3D object, either inward or outward, to create or modify its shape.

    Rate this question:

  • 22. 

    What is the depth or height of the rectangle ?  

    • A.

      1.45

    • B.

      1.55

    • C.

      1.23

    • D.

      4.55

    Correct Answer
    A. 1.45
    Explanation
    The depth or height of the rectangle is 1.45.

    Rate this question:

  • 23. 

    What is the name of the file ?  

    • A.

      term4, ,

    • B.

      sketchup

    • C.

      term 4

    • D.

      Test4

    Correct Answer
    A. term4, ,
    Explanation
    The correct answer is "term4" because it is the only option that is written without any extra spaces or punctuation marks. The other options have spaces or commas after the term, which makes them incorrect.

    Rate this question:

  • 24. 

    The gold circle in the image represent:  

    • A.

      Point of origin

    • B.

      Endpoint

    • C.

      Midpoint

    • D.

      Positive point

    Correct Answer
    A. Point of origin
    Explanation
    The gold circle in the image represents the point of origin. This means that it is the starting point or the place where something begins. It is the reference point from which other locations or distances are measured.

    Rate this question:

  • 25. 

    The green circle in the image represent:  

    • A.

      Point of origin

    • B.

      Endpoint

    • C.

      Midpoint

    • D.

      Positive point

    Correct Answer
    B. Endpoint
    Explanation
    The green circle in the image represents the endpoint. The endpoint is the final point of a line segment or a ray. It is where the line segment or ray ends. In the given image, the green circle is shown at the end of a line, indicating that it is the endpoint.

    Rate this question:

  • 26. 

    The cyan circle in the image represent:  

    • A.

      Point of origin

    • B.

      Endpoint

    • C.

      Midpoint

    • D.

      Positive point

    Correct Answer
    C. Midpoint
    Explanation
    The cyan circle in the image represents the midpoint. The midpoint is the exact middle point between two given points or the center point of a line segment. It divides the line segment into two equal halves. In this case, the cyan circle is likely positioned at the midpoint of a line segment or the center of a shape, indicating the equal distance from both ends or sides.

    Rate this question:

  • 27. 

    There are 3 axis in sketch up , the Blue axis represent:   

    • A.

      Y - axis

    • B.

      X-axis

    • C.

      Z-axis

    • D.

      S-axis

    Correct Answer
    C. Z-axis
    Explanation
    In SketchUp, the Blue axis represents the Z-axis. The Z-axis is the vertical axis and is used to represent height or depth in a 3D model. The X-axis represents the horizontal axis, and the Y-axis represents the depth or width axis. The S-axis is not a valid axis in SketchUp.

    Rate this question:

  • 28. 

    There are 3 axis in sketch up , the Red axis represent:   

    • A.

      Y - axis

    • B.

      X-axis

    • C.

      Z-axis

    • D.

      S-axis

    Correct Answer
    B. X-axis
    Explanation
    In SketchUp, the Red axis represents the X-axis. The X-axis is a horizontal line that runs from left to right. It is used to measure and position objects along the horizontal plane in the 3D modeling software.

    Rate this question:

  • 29. 

    There are 3 axis in sketch up , the Green axis represent:   

    • A.

      Y - axis

    • B.

      X-axis

    • C.

      Z-axis

    • D.

      S-axis

    Correct Answer
    A. Y - axis
    Explanation
    The correct answer is the Y-axis. In SketchUp, the green axis represents the Y-axis, which is the vertical axis. The X-axis represents the horizontal axis, and the Z-axis represents the depth or distance from the viewer. The S-axis is not a valid axis in SketchUp.

    Rate this question:

  • 30. 

    The letter V , is the short cut to use the Move tool

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    The statement is false because the letter V is not the shortcut to use the Move tool. The correct shortcut to use the Move tool may vary depending on the software or program being used.

    Rate this question:

  • 31. 

    The letter A , is the short cut to use the Arc tool

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    The statement is true because in many design software programs, including Adobe Illustrator, the letter "A" is commonly used as a shortcut key to activate the Arc tool. This tool allows users to create curved lines or shapes, making it easier and quicker to draw arcs and segments. By pressing the "A" key on the keyboard, users can access this tool without having to navigate through menus or search for it in the toolbar. Therefore, the statement is correct.

    Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Sep 03, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Nov 29, 2016
    Quiz Created by
    Aic
Back to Top Back to top
Advertisement