Draping Quiz

The correct answer is that the entire back hip should be 1" longer than the entire front hip. This means that the measurement of the back hip should exceed the measurement of the front hip by 1 inch.

A "V cut" refers to a type of notch that is shaped like the letter V. It involves making a diagonal cut that starts narrow at the top and widens as it goes deeper into the material. This type of cut is commonly used in woodworking and carpentry to create joints or decorative designs. The V cut provides stability and strength to the joint or design element.

Blending is the technique used to smoothen the sharp corners of the waist and skirt hem of the princess panel dress. This involves gradually transitioning and merging the edges together to create a seamless and smooth finish. It helps to eliminate any harsh angles or corners, resulting in a more polished and professional look for the dress.

The standard length of the elbow dart is 3 1/2".

The lengthwise grain refers to the direction of the fabric that runs parallel to the selvage. It is the strongest and most stable grain of the fabric. When laying out a pattern on the fabric, it is important for the grainline of the pattern to be parallel to the lengthwise grain of the fabric. This ensures that the fabric will drape and hang correctly when the garment is made. The crosswise grain runs perpendicular to the selvage, the bias grain runs diagonally across the fabric, and the parallel grain is not a recognized term in relation to fabric grainlines.

The standard length of the back shoulder dart for the basic bodice is 3".

The correct answer is "You measure along the bust level from CF to SS and add 5" fabric allowance." This is because when preparing the fabric width of the front bodice, you need to measure from the center front (CF) to the side seam (SS) along the bust level. Additionally, you need to add 5" of fabric allowance to ensure there is enough fabric for proper fitting and sewing.

The statement is suggesting that the back hip measurement should be 1" longer than the front hip measurement. This implies that there should be a slight difference in size between the front and back of the hips. Therefore, the correct answer is true.

When preparing the fabric of the basic skirt, a fabric allowance of 2" is allotted on top of the waistline. This fabric allowance is necessary to accommodate the waistband and any adjustments needed for fitting. It allows for flexibility and ease of movement when wearing the skirt.

The correct answer is Waist. When blending the flare of a skirt, it is common to start at the waist. This is because the waist is the narrowest part of the body and accentuating it can create a flattering silhouette. By beginning at the waist, the skirt can gradually flare out and create a balanced and stylish look.

The seam allowance for the CF (Center Front) and CB (Center Back) is 1".

The standard opening of the elbow dart is 1/2 to 5/8".

When preparing the fabric for the front and back center panel of the princess panel bodice/torso/dress, it is necessary to add a fabric allowance of 4 to 5 inches. This additional fabric allows for fitting adjustments, seam allowances, and any necessary alterations during the construction process. Adding this allowance ensures that there is enough fabric to create a well-fitted and comfortable garment.

The standard flare measurement added to each seam of the princess panel dress is 3".

In order to create a well-fitting basic bodice, the crossgrain at the back should be aligned to the shoulder blade level. This ensures that the bodice will fit properly across the back and shoulders, providing the necessary ease and mobility for the wearer. Aligning it to the bust level, waist level, or wrist level would result in an incorrect fit and potentially restrict movement or cause discomfort.

The standard distance between the apex and the empire along the princess seam is 3 inches.

Notching is another marking method used to identify which is the front part from the back. Notching involves making small cuts or indentations on the surface of an object, typically in a specific pattern or shape, to differentiate the front side from the back side. This method is commonly used in industries such as manufacturing, construction, and woodworking to ensure proper orientation and assembly of components. By creating notches, workers can easily identify which side is the front and which is the back, leading to more efficient and accurate work processes.

The standard length of the back waist dart for a basic bodice is 7".

The overarm length refers to the distance from one fingertip to the other with arms stretched out horizontally, while the underarm length is the distance from one fingertip to the other with arms stretched out vertically. The difference between these two lengths is equivalent to the cap height, which is the distance from the top of the head to the bottom of the chin.

The bustier pattern can be derived from the Princess Panel Bodice pattern. The Princess Panel Bodice pattern includes panels that are shaped to fit the curves of the body, which is similar to the structure of a bustier. This pattern allows for a fitted and structured garment that accentuates the waist and bust, making it suitable for creating a bustier design. The Basic Bodice and Shift Dress patterns do not have the same panel structure, and the Shift Body pattern is not specifically designed for creating a bustier.

The standard distance between the 2 waist darts for a basic skirt is 1 1/4". This measurement is commonly used in sewing patterns to ensure a proper fit and shape around the waist area of the skirt. The waist darts are strategically placed to create a tailored look and provide shaping for the garment.

The standard length of the back waist darts for a basic skirt is 5 1/2". This measurement is typically used to create shaping and contouring at the back waist area of the skirt, allowing it to fit properly and comfortably around the waist.

In draping the princess panel dress, the crossgrains of the front and back panels should be aligned at the princess seam. This seam runs from the shoulder or armhole down to the waist, creating a flattering and fitted silhouette. By aligning the crossgrains at this seam, the panels can be properly joined together, ensuring the desired fit and shape of the dress.

When adding ease allowance to the armhole of the basic bodice, 1/2" of ease allowance is added to the armhole. This means that the armhole will be made slightly larger by adding this extra fabric, allowing for more comfort and ease of movement.

The correct answer is 1/2". The seam allowance for the princess seam is usually 1/2". This allows for the necessary ease and room for adjustments during the sewing process. A larger seam allowance may result in a bulky seam, while a smaller allowance may make it difficult to make alterations if needed. Therefore, 1/2" is the standard and most commonly used seam allowance for princess seams.

The standard length of the front waist darts for a basic skirt is 3 1/2". This measurement is commonly used to create shaping and contouring at the waistline of the skirt, allowing it to fit properly and flatter the wearer's figure. The length of the darts may vary depending on the design and style of the skirt, but 3 1/2" is a standard measurement for this particular garment.

The seam allowance for the cuff or wrist is 1". This means that when sewing the cuff or wrist onto a garment, a 1" seam allowance should be used. This allows for enough fabric to be folded over and stitched, creating a clean and secure finish. A larger seam allowance may result in a bulkier cuff or wrist, while a smaller allowance may not provide enough fabric for a sturdy seam.

The standard opening of the back shoulder dart for a basic bodice is 1/2". This means that the dart should be sewn with a width of 1/2" at its widest point.

The easing allowance allotted for front and back hips in the basic skirt is 4/8". This means that when preparing the fabric, an additional 4/8" of fabric is added to the front and back hips to allow for ease and comfort when wearing the skirt.

The side panel grainline is aligned to the center of the Princess Panel. This means that the grainline of the fabric is positioned in the middle of the side panel, ensuring that the fabric is cut and sewn in the correct direction for the best fit and drape.