CPSI Test

The highest amount of inches that a balance beam should be for children between the ages of 2-5 years old is 12 inches. This measurement ensures that the beam is at an appropriate height for young children to safely balance and navigate on.

The maximum length of a chain supporting an overhead ring is 7 inches.

The CPSC Handbook was published in 1981.

The first piece of playground equipment that was deemed dangerous by the CPSC was the giant stride.

The swing for a preschooler or school-age child should be at least 12 inches from the ground. This ensures that the child can comfortably sit on the swing without their feet touching the ground, allowing them to swing freely and safely. The measurement can be expressed as 12, 12", or 12 inches.

The question is asking for the minimum distance that the underside of a merry-go-round should be from the ground. The answer options are all the same, just written in different formats. They all represent the same measurement of 9 inches.

The correct answer for this question is 50 degrees. This means that no section of a slide chute should have an angle greater than 50 degrees. It is important to adhere to this limit to ensure the safety of individuals using the slide chute. If the angle exceeds 50 degrees, it could increase the risk of accidents or injuries. Therefore, it is crucial to design and construct slide chutes within this specified angle limit.

ASTM F1487 is the correct answer because it pertains to the specifications of playground equipment for public use. This standard provides guidelines for the design, construction, installation, and maintenance of playgrounds to ensure the safety of children using the equipment. It covers various aspects such as surfacing, accessibility, structural integrity, and entrapment hazards. Compliance with ASTM F1487 helps ensure that playground equipment meets the necessary safety requirements for public use.

The platform of a slide should be at least 14 inches deep.

CCA, or Chromated Copper Arsenate, is a chemical treatment used to protect wood from decay and insect damage. However, it was found to pose health and environmental risks, leading to its discontinuation for certain applications. In 2003, the processing of CCA for playground equipment was stopped, likely due to concerns about the potential exposure of children to the harmful chemicals.

The diameter of a head probe is 9 inches.

ASTM Standard F1951 pertains to the accessibility of surface systems under and around playground equipment. This standard provides guidelines and requirements for ensuring that the surface systems used in playgrounds are safe and accessible for all users, including individuals with disabilities. It covers aspects such as impact attenuation, wheelchair accessibility, and tripping hazards. By following this standard, playground operators can create a safe and inclusive play environment for children of all abilities.

The minimum rung width on a ladder designed for children 5-12 is 16 inches.

The maximum speed of a merry-go-round is 13 feet per second. This means that the merry-go-round can rotate at a maximum speed of 13 feet per second.

For preschool-age children (ages 2-5), the recommended maximum fall height for playground equipment is 6 feet. This guideline is established to reduce the risk of serious injury from falls, which are a common cause of playground injuries. Ensuring that equipment does not exceed this height helps create a safer play environment for young children, adhering to safety standards and reducing the likelihood of severe accidents.

9 inches of pea gravel provides a safe fall height of 5 feet. This means that if someone were to fall onto the pea gravel from a height of 5 feet or less, the gravel would provide enough cushioning to minimize the risk of injury.

The maximum height of the slide chute of an embankment slide should be 12 inches.

not-available-via-ai

The handle of a track ride should be between 64 and 78 inches from the surfacing. This means that the handle should be at a height of at least 64 inches and no more than 78 inches from the ground. The options given in the question - 64, 64", and 64 inches - all represent the same measurement and are within the acceptable range for the handle height.

The highest amount of inches that a balance beam should be for school-age children is 16 inches. This ensures that the beam is at an appropriate height for children to safely practice and perform gymnastics skills.

The minimum rung width on a ladder designed for children 2-5 is 12 inches.

The correct answer for this question is 25 degrees. On a seesaw, the angle between a line connecting the seats and the horizontal should not exceed 25 degrees. This is because exceeding this angle can make the seesaw unstable and increase the risk of accidents or injuries. It is important to ensure that the seesaw is properly balanced and that the angle does not exceed the recommended limit for safe use.

ASTM F1816 is the correct answer because it specifically pertains to drawstrings on children's clothing. The ASTM (American Society for Testing and Materials) sets standards for various products to ensure safety and quality. In the case of children's clothing, drawstrings can pose a safety hazard by getting caught in objects or causing strangulation. Therefore, ASTM F1816 provides guidelines and requirements for the design, placement, and use of drawstrings on children's clothing to minimize these risks.

The minimum height for the top rail of a guardrail on a structure designed for a 5-12 year old is 38". This height is necessary to ensure the safety of the children using the structure, as it prevents them from accidentally falling off. A higher rail provides a better barrier and reduces the risk of accidents or injuries.

Swings should be placed 30 inches or 30" apart from their supporting structures. This distance ensures that there is enough space for the swing to move back and forth without hitting the supporting structures or any obstacles nearby. It also allows for comfortable seating and swinging experience for the users.

Arch climbers can be used by preschoolers, so the statement "They can never be used by preschoolers" is not true. Arch climbers are a type of playground equipment that should not be used as the sole means of access to other equipment by preschoolers. The rung diameter of arch climbers should follow the same recommendation as rung ladders, and there are guidelines for the spacing of the rungs.

ASTM F2049 is the correct answer for the question. This standard specifically pertains to fences and barriers on playgrounds. It provides guidelines and requirements for the design, installation, and maintenance of these structures to ensure the safety of children using the playground. Compliance with this standard helps to prevent accidents and injuries by ensuring that fences and barriers are properly constructed and meet certain safety criteria.

The minimum insertion depth of a torso probe is 4 inches or 4". This means that the probe should be inserted into the torso at least 4 inches or 4" deep in order to obtain accurate readings or measurements.

The maximum height of an overhead ladder for children from ages 5-12 is 84 inches. This measurement is commonly used to ensure the safety and comfort of children while using the ladder.

For swings, the use zone, which is the area under and around playground equipment where a child might fall, should be twice the height of the swing's suspending bar both in front of and behind the swings. This is to ensure that there is adequate safe space should a child fall off or jump from the swing. Other statements are either inaccurate or do not conform to widely recognized playground safety standards.

The maximum number of degrees for the average slope of incline in a slide should be 30 degrees. This means that the angle of the incline should not exceed 30 degrees for safety reasons. A steeper slope could increase the risk of accidents and injuries for those using the slide. Therefore, it is important to ensure that the average slope of incline does not go beyond this limit.

The first rung should not be directly over the platform but should be no more than 10 inches from the platform.

The correct answer is 2ft, 2 feet, 24", 24 inches. A bucket swing should be located at least this high from the ground to ensure the safety of the child using it. This height allows for proper swinging motion and prevents the child from hitting the ground or any obstacles while swinging.

The maximum height of an overhead ladder for preschool age children is 60 inches. This ensures that the ladder is at a safe height for young children to reach and play on without the risk of injury.

The maximum size that hand gripping equipment of playground equipment should be is 1.55 inches. This measurement ensures that children can securely grip the equipment while playing, reducing the risk of accidents or falls. It is important to maintain an appropriate size to ensure the safety and comfort of children using the playground equipment.

According to safety guidelines, a 9-inch layer of wood mulch provides a safe fall height of 7 feet. This means that if someone were to fall from a height of 7 feet onto the mulch, it would provide enough cushioning to reduce the risk of injury.

The maximum height above the ground that the chute exit should be on a tube slide over 4 feet tall is 15 inches.

The answer is 20, 20", 20 inches because these options all represent the same measurement. The question is asking for the distance between swing supports, and all three options indicate that the distance should be 20 inches. The first option "20" is simply stating the number 20, the second option "20"" is indicating 20 inches with the use of quotation marks, and the third option "20 inches" explicitly states the measurement unit. Therefore, all three options are correct and represent the same distance of 20 inches between swing supports.

ASTM Standard F1292 pertains to the attenuation qualities of different playground surfacing materials. This standard provides guidelines and test methods for measuring the impact attenuation of these materials to ensure the safety of children while playing. It specifies the maximum allowable fall height and impact attenuation performance requirements for playground surfacing materials to minimize the risk of serious injuries from falls.

The correct answer is any of the options given: 1.9", 1.9 ", 1.9 inches, 1.9. This suggests that the maximum diameter of a sliding pole on a playground should be 1.9 inches.

The distance between two track rides that sit side by side should be 4 feet or 48 inches. This distance ensures that there is enough space for the rides to operate safely without any collision or interference between them. It is important to maintain this distance to ensure the safety of the riders and the proper functioning of the rides.

According to safety standards, 9 inches of sand is considered to provide a safe fall height of 4 feet. This means that if someone falls from a height of 4 feet onto 9 inches of sand, it would help cushion their fall and reduce the risk of injury.

The maximum height above the ground that the chute exit should be on a tube slide under 4 feet tall is 11 inches.

The appropriate height for a handrail on equipment designed for school-age children is 22-38 inches. This range allows for flexibility in accommodating children of different heights and ensures that the handrail is accessible and safe for all users. A lower height may be suitable for younger children, while a higher height can accommodate older or taller children. This range provides a balance between accessibility and safety for children of varying ages and heights.

To provide a safe fall height of 10 feet, 6 inches of shredded/recycled rubber is required. This is because rubber is often used as a safety surface material in playgrounds and other areas where falls are common. The thickness of the rubber acts as a cushion, absorbing the impact and reducing the risk of injury. In this case, 6 inches of rubber is sufficient to provide a safe landing for a fall from a height of 10 feet.

The recommended distance between a sliding pole and any structure used to access it is 18-20 inches. This distance allows for enough space for a person to comfortably grip the pole and slide down without any obstructions from the structure. It also ensures that there is enough clearance to prevent any potential accidents or injuries while using the sliding pole.

A platform on a structure designed for a 2-5 year old would require a barrier at a height of 30 inches. This is because children of this age range are typically not tall enough to climb over or reach objects at that height without assistance or supervision. Therefore, a barrier at 30 inches would help ensure the safety of the children using the platform.

The minimum height for the top rail of a guardrail on a structure designed for a 2-5 year old is 29 inches. This height ensures that the guardrail is at an appropriate level to provide safety and prevent falls for young children.