Assembly And Packaging Trivia Quiz!
(211).jpg "Assembly And Packaging Trivia Quiz! - Quiz")
Would you like to learn about assembly and packaging? This process provides a constant sterile supply of instruments and apparatuses to the different departments of the hospital. It is crucial to have cleaned, decontaminated, and sterilized items appropriately stored. Assembly and packaging are especially important, but it is sometimes overlooked. It is a vital step according to CSSD policy and procedure. This neat quiz is just what the doctor ordered.
Questions and Answers
- 1.
The U.S. food and drug administration classifies sterilization packaging as a:
- A.
Class I medical device
- B.
Class II medical device
- C.
Class III medical device
- D.
Class IV medical device
Correct Answer
B. Class II medical deviceExplanation
Sterilization packaging is classified as a class II medical device by the U.S. Food and Drug Administration. This classification suggests that sterilization packaging has a moderate level of risk associated with its use. Class II medical devices require special controls to ensure their safety and effectiveness. This classification indicates that sterilization packaging has been determined to be a necessary component in the sterilization process and must meet specific regulatory requirements to be marketed and used in healthcare settings.Rate this question:
-
- 2.
Which of the following is NOT an acceptable sterilization packaging material?
- A.
Muslin
- B.
Barrier cloth
- C.
Canvas
- D.
Twills
Correct Answer
C. CanvasExplanation
Canvas is not an acceptable sterilization packaging material because it is not able to provide an effective barrier against microorganisms. Muslin, barrier cloth, and twills are commonly used materials for sterilization packaging as they are able to prevent the entry of microorganisms and maintain sterility. However, canvas is not suitable for this purpose as it may allow the passage of microorganisms, compromising the sterility of the packaged items.Rate this question:
-
- 3.
Count sheets:
- A.
Describe each instrument in detail
- B.
Are used only for operating rooms trays and large procedure packs
- C.
Provide a detailed list of trays contents
- D.
Include manufacturer's instructions for use information
Correct Answer
C. Provide a detailed list of trays contentsExplanation
The correct answer is "provide a detailed list of trays contents". This means that count sheets are used to list all the items or instruments that are included in a tray or pack used in operating rooms. It helps ensure that all the necessary instruments are present and accounted for during procedures. The count sheet provides a detailed inventory of the contents, allowing healthcare professionals to easily check and verify that everything is in order. It is an important tool for maintaining organization and efficiency in the operating room.Rate this question:
-
- 4.
When arranging paper/ plastic pouches in the sterilizer, the pouches should be arranged?
- A.
Paper-to-plastic
- B.
Paper-to-plastic
- C.
Plastic-to-plastic
- D.
Flat
Correct Answer
A. Paper-to-plasticExplanation
The correct answer is paper-to-plastic. When arranging paper/plastic pouches in the sterilizer, it is important to arrange them with the paper side facing the plastic side. This is because the paper side is more susceptible to damage from heat and moisture, so by placing it against the plastic, it is protected. Additionally, arranging them in this way ensures that the contents of the pouch are properly sterilized and protected during the sterilization process.Rate this question:
-
- 5.
The relative humidity of the central service prep and pack area should be:
- A.
Less than 75%
- B.
30% to 60%
- C.
40% to 80%
- D.
Less than 35%
Correct Answer
B. 30% to 60%Explanation
The relative humidity of the central service prep and pack area should be between 30% and 60%. This range is considered optimal for maintaining the quality and safety of the products being prepared and packed in the area. Higher humidity levels can promote the growth of bacteria and mold, leading to spoilage of the products. On the other hand, lower humidity levels can cause the products to dry out and lose their quality. Therefore, maintaining a relative humidity between 30% and 60% ensures a suitable environment for the central service prep and pack area.Rate this question:
-
- 6.
Some plastics including formulations of spun-bonded polyolefin are intended for use solely in these sterilization processes.
- A.
Steam
- B.
Ozone and hydrogen peroxide
- C.
Liquid
- D.
Gravity
Correct Answer
B. Ozone and hydrogen peroxideExplanation
Some plastics, including formulations of spun-bonded polyolefin, are specifically designed to be used only in sterilization processes involving ozone and hydrogen peroxide. These sterilization methods are effective in killing microorganisms and ensuring a sterile environment. Other sterilization processes, such as steam or liquid sterilization, may not be suitable for these types of plastics and may cause damage or degradation to the material. Therefore, ozone and hydrogen peroxide sterilization is the recommended method for these specific plastics.Rate this question:
-
- 7.
When placing hinged instruments in an instrument tray:
- A.
Lock the handles to prevent damage during sterilization
- B.
Arrange the instruments in alphabetical order
- C.
Arrange the instruments in the order of their use
- D.
Unlock the handles and open the instruments
Correct Answer
D. Unlock the handles and open the instrumentsExplanation
When placing hinged instruments in an instrument tray, it is important to unlock the handles and open the instruments. This is because hinged instruments need to be opened for proper sterilization. If the handles are locked, it can prevent the instruments from being fully opened, which may hinder the sterilization process. Therefore, unlocking the handles and opening the instruments allows for thorough sterilization and prevents any potential damage.Rate this question:
-
- 8.
Gauze square is the wicking material of choice for instruments sets.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because gauze square is not the preferred wicking material for instrument sets. There are other materials such as cotton or synthetic sponges that are commonly used for this purpose.Rate this question:
-
- 9.
When placing instruments in a peel pack, the tips should always face the plastic side of the pack.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
When placing instruments in a peel pack, it is important to ensure that the tips of the instruments face the plastic side of the pack. This is because the plastic side provides a protective barrier, preventing the tips from puncturing through the pack and potentially causing damage or injury. Placing the tips towards the plastic side also makes it easier to identify and retrieve the instruments when needed, as they are more visible. Therefore, it is crucial to follow this practice to maintain the integrity of the peel pack and ensure the safety of the instruments.Rate this question:
-
- 10.
All rigid sterilization containers have tamper-evident seals.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Rigid sterilization containers are designed to securely hold and protect medical instruments during the sterilization process. Tamper-evident seals are an important feature of these containers as they provide visual indication if the container has been tampered with or opened before use. This ensures the sterility and safety of the instruments inside. Therefore, it can be concluded that all rigid sterilization containers have tamper-evident seals.Rate this question:
-
- 11.
Cellulose materials cannot be processed within ozone sterilizer.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Cellulose materials cannot be processed within an ozone sterilizer because ozone can react with the cellulose fibers and cause degradation or damage to the material. Ozone is a highly reactive gas that can break down organic compounds, and cellulose is a natural polymer found in plants. Therefore, exposing cellulose materials to ozone sterilization can result in the deterioration of the material, making it unsuitable for processing within an ozone sterilizer.Rate this question:
-
- 12.
Reusable textile packaging requires less labor than disposable packaging.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Reusuable textile packaging does not necessarily require less labor than disposable packaging. The labor required for both types of packaging depends on various factors such as the size and complexity of the packaging, the number of times it can be reused, and the specific process involved in its reuse. Therefore, it cannot be stated as a general rule that reusable textile packaging requires less labor than disposable packaging.Rate this question:
-
- 13.
Using latex tubing to protect delicate instrumentation is the process of choice for items to be steam-sterilized.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Using latex tubing to protect delicate instrumentation is not the process of choice for items to be steam-sterilized. Latex tubing is not suitable for steam sterilization as it can degrade and release harmful substances when exposed to high temperatures. Therefore, an alternative material or method should be used for items that require steam sterilization.Rate this question:
-
- 14.
While the outside of all instruments must be dry before sterilization it is important to ensure all lumens are kept moist for sterilization.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
It is false that all lumens should be kept moist for sterilization. While the outside of instruments must be dry before sterilization, it is crucial to ensure that all lumens are completely dry as well. Moisture can interfere with the sterilization process and compromise its effectiveness. Therefore, it is important to thoroughly dry all lumens before sterilizing instruments.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Aug 06, 2018Quiz Created by
Deedee0704
Back to top