CDC 2S051 Volume 5 June 2011 By Dl
Questions and Answers
- 1.
At least how many individual options does Standard Asset Tracking System (SATS) have built-in within the reports list
- A.
10
- B.
15
- C.
20
- D.
25
Correct Answer
D. 25Explanation
The correct answer is 25. This means that the Standard Asset Tracking System (SATS) has a minimum of 25 individual options built-in within the reports list.Rate this question:
-
- 2.
Who is in charge of all the internal workings of the Standard Asset Tracking System (SATS)
- A.
User
- B.
Customer
- C.
Network technician
- D.
System Administrator
Correct Answer
D. System AdministratorExplanation
The System Administrator is responsible for managing and overseeing all the internal workings of the Standard Asset Tracking System (SATS). They are in charge of setting up and maintaining the system, ensuring its smooth operation, and troubleshooting any issues that may arise. The System Administrator has the authority to make changes, updates, and modifications to the system as needed, and they are the primary point of contact for any technical or operational questions or concerns related to SATS.Rate this question:
-
- 3.
How many types of hand-held terminals are used in the Standard Asset Tracking System
- A.
One
- B.
Two
- C.
Three
- D.
Four
Correct Answer
C. ThreeExplanation
The correct answer is Three because the question asks about the number of types of hand-held terminals used in the Standard Asset Tracking System. This implies that there are multiple types of hand-held terminals, and the correct answer is three.Rate this question:
-
- 4.
The type of hand-held terminal that uses a Symbol Technologies Hand Held Fuzzy Logic Scanner is the Intermec Janus
- A.
2010
- B.
2020
- C.
5023
- D.
5032
Correct Answer
A. 2010Explanation
The Intermec Janus is the type of hand-held terminal that uses a Symbol Technologies Hand Held Fuzzy Logic Scanner.Rate this question:
-
- 5.
What happens during a warm-boot
- A.
Many applications reset to original settings
- B.
Configuration settings and files are retained
- C.
Many settings revert to the default factory settings
- D.
The Standard Asset Tracking System (SATS) application is not retained
Correct Answer
B. Configuration settings and files are retainedExplanation
During a warm-boot, the system is restarted without completely shutting down the computer. This means that the configuration settings and files are retained, allowing the system to resume operations without any loss of data or changes made to the settings. Other options mentioned, such as applications resetting to original settings or reverting to default factory settings, are not applicable during a warm-boot. The Standard Asset Tracking System (SATS) application is not mentioned in relation to what happens during a warm-boot.Rate this question:
-
- 6.
Which of the following is not correct concerning a cold-boot
- A.
Configuration settings and files are retained
- B.
The network and scanner parameters are retained
- C.
Some settings revert to the default factory settings
- D.
It is necessary to re-flash the Standard Asset Tracking System application onto the hand -held terminal
Correct Answer
A. Configuration settings and files are retainedExplanation
A cold-boot refers to restarting a device from a completely powered-off state. During a cold-boot, configuration settings and files are not retained. Instead, the device reverts back to its default factory settings. This means that any custom settings or files that were previously saved on the device will be lost. The network and scanner parameters may or may not be retained depending on the device and its specific settings. However, it is not necessary to re-flash the Standard Asset Tracking System application onto the hand-held terminal during a cold-boot.Rate this question:
-
- 7.
Software is loaded into haand-held terminals through a process called
- A.
Configuring
- B.
Transferring
- C.
Installing
- D.
Flashing
Correct Answer
D. FlashingExplanation
Flashing is the process of loading software into handheld terminals. This term is commonly used when referring to firmware or operating system updates. During the flashing process, the existing software is erased and replaced with the new software. This ensures that the handheld terminal has the latest version of the software and any necessary bug fixes or enhancements.Rate this question:
-
- 8.
At a minimum, what Microsoft Windows operating system is required for flashing a hand-held terminal
- A.
95
- B.
98
- C.
XP
- D.
2000
Correct Answer
A. 95Explanation
The minimum Microsoft Windows operating system required for flashing a hand-held terminal is Windows 95.Rate this question:
-
- 9.
What are tracked in Standard Asset Tracking System (SAT) while an item is in route to its warehouse location or delivery destination?
- A.
No Warehouse locations
- B.
Temporary locations
- C.
Permanent locations
- D.
Assigned locations
Correct Answer
B. Temporary locationsExplanation
In a Standard Asset Tracking System (SAT), temporary locations are tracked while an item is in route to its warehouse location or delivery destination. This means that the system keeps a record of the temporary locations the item passes through during transportation, allowing for better visibility and control over the item's movement. Permanent locations and assigned locations are not relevant in this context as they refer to fixed storage or assigned areas within the warehouse.Rate this question:
-
- 10.
What two types of Movements are users allowed to perform on a hand-held terminal
- A.
Individual and bulk
- B.
Single and multiple
- C.
Temporary and permanment
- D.
Assigned and no warehouse location
Correct Answer
A. Individual and bulkExplanation
Users are allowed to perform two types of movements on a hand-held terminal: individual and bulk. Individual movements refer to the ability to move items one at a time, while bulk movements involve moving multiple items simultaneously. This distinction allows users to efficiently manage inventory and streamline operations based on their specific needs.Rate this question:
-
- 11.
Which hand-held terminal function allows the user to place items into the warehouse location
- A.
Pull
- B.
Delivery
- C.
Put Away
- D.
Movement.
Correct Answer
C. Put AwayExplanation
The function of "Put Away" allows the user to place items into the warehouse location. This involves taking the items from their current location and placing them in the designated storage area within the warehouse. This function is typically used when receiving new inventory or when organizing items within the warehouse to optimize storage space.Rate this question:
-
- 12.
All are functions of the Pull process except
- A.
Regular Pull
- B.
Pull by Label
- C.
Pull by location
- D.
High Priority Pull
Correct Answer
C. Pull by locationExplanation
The correct answer is "Pull by location". The other options mentioned, such as Regular Pull, Pull by Label, and High Priority Pull, are all examples of functions that can be performed in the Pull process. However, "Pull by location" is not a valid function in the Pull process.Rate this question:
-
- 13.
Which of these actions does not occur when scanning receipts (REC) through Standard Asset Tracking System (SATS)
- A.
Clears the REC document from SATS
- B.
Greatly reduces Document Control Workload
- C.
Clears the REC document control record from the Material Management System
- D.
Eliminates the need of sending of a hardcopy receipt document to Document Control
Correct Answer
A. Clears the REC document from SATSExplanation
The correct answer is "Clears the REC document from SATS." This action does not occur when scanning receipts through the Standard Asset Tracking System (SATS). The other options mention actions that do occur when scanning receipts, such as greatly reducing document control workload, clearing the REC document control record from the Material Management System, and eliminating the need to send a hardcopy receipt document to Document Control. However, there is no mention of clearing the REC document from SATS in the given options.Rate this question:
-
- 14.
What function indicates that an item has been transferred from the receiving area to the next step in the storage and delivery process
- A.
Pull
- B.
Delivery
- C.
Put Away
- D.
Reject and Movement
Correct Answer
D. Reject and MovementExplanation
The function that indicates that an item has been transferred from the receiving area to the next step in the storage and delivery process is "Reject and Movement". This function implies that the item has been rejected in the receiving area and is being moved to another location or step in the process. It suggests that the item did not meet the required criteria and needs to be handled separately from the other items.Rate this question:
-
- 15.
What process verifies that the user has placed an item in the correct location in the warehouse
- A.
Pull
- B.
Delivery
- C.
Put Away
- D.
Movement
Correct Answer
C. Put AwayExplanation
The process of "Put Away" verifies that the user has placed an item in the correct location in the warehouse. This process involves taking the item from its initial location and placing it in its designated storage location within the warehouse. By completing the "Put Away" process, the user ensures that the item is placed correctly and can be easily located when needed.Rate this question:
-
- 16.
What does the Pull process involve
- A.
Delivering property to the customer
- B.
Issuing property from the warehouse
- C.
Tracking an interm location for an item
- D.
Placing an item in the proper storage location
Correct Answer
B. Issuing property from the warehouseExplanation
The Pull process involves issuing property from the warehouse. This means that when a customer requests a specific item, it is retrieved from the warehouse and given to the customer. This process ensures that the customer receives the correct item in a timely manner.Rate this question:
-
- 17.
How many pre-sorted reports are avilable to the Standard Asset Tracking System users
- A.
10
- B.
17
- C.
24
- D.
31
Correct Answer
D. 31Explanation
There are 31 pre-sorted reports available to the Standard Asset Tracking System users.Rate this question:
-
- 18.
When processing reports in the Standard Asset Tracking System, options that allow you to filter data for your specific requirements are called
- A.
Selection types
- B.
Parameters
- C.
Data lists
- D.
Sorts
Correct Answer
A. Selection typesExplanation
In the Standard Asset Tracking System, the options that allow users to filter data for their specific requirements are referred to as selection types. These selection types provide users with the ability to choose specific criteria or conditions to narrow down the data they want to view or analyze. This helps users to focus on the relevant information and obtain more meaningful insights from the reports generated in the system.Rate this question:
-
- 19.
The report that provides a snapshot of the effectiveness of meeting customer requirements with on-the-shelf assets is referred to as the Items
- A.
Pulled
- B.
Not Pulled
- C.
Received by Customer
- D.
Not Received by Customer
Correct Answer
D. Not Received by CustomerExplanation
The report that provides a snapshot of the effectiveness of meeting customer requirements with on-the-shelf assets is referred to as "Not Received by Customer". This report would show the items that were not received by the customer, indicating a gap in meeting their requirements. It helps identify any issues or inefficiencies in the supply chain or fulfillment process that may have led to these items not reaching the customer.Rate this question:
-
- 20.
Maintenance processing is only performed
- A.
On the workstation
- B.
At the end of the day
- C.
By appointed personnel
- D.
With the hand-held terminal
Correct Answer
A. On the workstationExplanation
Maintenance processing is only performed on the workstation because it is the designated location where all maintenance tasks are carried out. This ensures that the necessary tools, equipment, and software are readily available for the personnel appointed to perform the maintenance. By conducting maintenance at the end of the day, it minimizes disruption to regular work hours and allows for a more efficient workflow. The hand-held terminal may be used for other tasks, but it is not specifically mentioned in the context of maintenance processing.Rate this question:
-
- 21.
The batch hand-held terminal loginin sub-process allows users to log into the hand-held terminal when no
- A.
Standard Asset Tracking System (SATS) session is available
- B.
Communication dock is available
- C.
Radio frequency (RF) is available
- D.
Workstation is available
Correct Answer
C. Radio frequency (RF) is availableExplanation
The batch hand-held terminal login sub-process allows users to log into the hand-held terminal when radio frequency (RF) is available. This means that the terminal can connect to a wireless network and communicate with other devices or systems using RF signals. Without RF availability, the terminal would not be able to establish a connection and therefore users would not be able to log in.Rate this question:
-
- 22.
How many INFOConnect paths does the Standard Asset Tracking System use to communicate with the Material Management System
- A.
Zero
- B.
One
- C.
Two
- D.
Three
Correct Answer
C. TwoExplanation
The Standard Asset Tracking System uses two INFOConnect paths to communicate with the Material Management System. This suggests that there are two separate channels or connections that facilitate the exchange of information between the two systems.Rate this question:
-
- 23.
The Standard Asset Tracking System (SATS) and the Material Management System interface input session
- A.
Provides Material Management System-generated SATS trans actions to SATS
- B.
Processes the output documents sent from Material Management System to SATS
- C.
Captures the Department of Defense Form 1448-1A and updates SATS with the data
- D.
Sends the SATS-generated Material Management System transactions to Material Management System
Correct Answer
D. Sends the SATS-generated Material Management System transactions to Material Management SystemExplanation
The correct answer is that the SATS system sends the SATS-generated Material Management System transactions to the Material Management System. This means that the SATS system is responsible for generating transactions within the Material Management System and sending them back to the system for processing. This helps to ensure that the Material Management System is updated with the most current data and that any changes or updates made within SATS are reflected in the Material Management System.Rate this question:
-
- 24.
What happens to the hand-held terminal (HHT) and workstation transactions when the Material Management System and Standard Asset Tracking System (SATS) are inable to interface
- A.
Both are halted until the SATS and Material Management System interface is restored
- B.
Both are maintained in the SATS database, in the order they have been generated
- C.
The workstation transactions are halted; the HHT transactions are maintained
- D.
The workstation transactions are maintained; the HHT transactions are halted
Correct Answer
B. Both are maintained in the SATS database, in the order they have been generatedExplanation
When the Material Management System and Standard Asset Tracking System (SATS) are unable to interface, both the hand-held terminal (HHT) and workstation transactions are maintained in the SATS database, in the order they have been generated. This means that even though the interface is not functioning, the transactions from both the HHT and workstation are still recorded and stored in the database, ensuring that they are not lost and can be processed once the interface is restored.Rate this question:
-
- 25.
In Discoverer, what is a logical grouping of database tables or views that apply to your specific data requirements
- A.
Joins
- B.
Sorts
- C.
Reports
- D.
Business areas
Correct Answer
D. Business areasExplanation
A business area in Discoverer refers to a logical grouping of database tables or views that are relevant to specific data requirements. It helps to organize and categorize the data in a way that is meaningful and relevant to the users. By grouping related tables and views together, it allows users to easily access and analyze the data that is applicable to their specific needs and responsibilities.Rate this question:
-
- 26.
In Discover Plus, what filters the data to display only the exact information you want
- A.
Calculations
- B.
Percentages
- C.
Parameters
- D.
Conditions
Correct Answer
D. ConditionsExplanation
Conditions filter the data to display only the exact information you want in Discover Plus. By setting specific conditions, you can narrow down the data based on certain criteria or requirements. This allows you to focus on the specific information that is relevant to your needs and eliminates any unnecessary or extraneous data.Rate this question:
-
- 27.
Which worksheet item enables you to summarize rows and columns quickly and easily
- A.
Sorts
- B.
Totals
- C.
Parameters
- D.
Calculations
Correct Answer
B. TotalsExplanation
The correct answer is "Totals" because this worksheet item allows you to quickly and easily summarize rows and columns. By using the Totals feature, you can calculate the sum, average, count, and other statistical measures for a selected range of data. This helps in analyzing and summarizing large amounts of data effectively.Rate this question:
-
- 28.
What is the process of arranging data into meaningful order so that you can analyze it more effectively
- A.
Conditioning
- B.
Arranging
- C.
Calculating
- D.
Sorting
Correct Answer
D. SortingExplanation
Sorting is the process of arranging data into a meaningful order so that it can be analyzed more effectively. By sorting data, it becomes easier to identify patterns, trends, and relationships within the data set. This allows for more efficient analysis and decision-making.Rate this question:
-
- 29.
What worksheet item offers pre-defined choices of data when you open a workbook
- A.
Totals
- B.
Conditions
- C.
Parameters
- D.
Percentages
Correct Answer
C. ParametersExplanation
Parameters is the correct answer because in a worksheet, parameters are used to offer pre-defined choices of data when a workbook is opened. Parameters allow users to select specific values or criteria that will affect the data displayed in the worksheet. By setting up parameters, users can easily filter and manipulate data without the need for complex formulas or manual data entry. This feature is particularly useful when working with large datasets or when creating interactive dashboards.Rate this question:
-
- 30.
In order to process pre-defined reports and modify the display of results in a worksheet, you would need to use the Discover
- A.
Reporter
- B.
Viewer
- C.
Query
- D.
Plus
Correct Answer
B. ViewerExplanation
To process pre-defined reports and modify the display of results in a worksheet, you would need to use the Viewer. The Viewer is a tool that allows users to view and manipulate pre-defined reports, making it the most suitable option for this task. The Discover Reporter is used to create and design reports, while Query and Plus are not specifically designed for modifying report displays in a worksheet.Rate this question:
-
- 31.
In Discover, what function allows you to transfer data to other application formats
- A.
Report
- B.
Import
- C.
Export
- D.
Print
Correct Answer
C. ExportExplanation
The function that allows you to transfer data to other application formats in Discover is Export. This feature enables users to save their data in a format that can be easily accessed and utilized by other applications or software. By selecting the Export option, users can convert their data into a compatible format, such as CSV or Excel, and then import it into another program for further analysis or processing.Rate this question:
-
- 32.
What system provides the ability to make repair, deployment, sourcing, maintenance, acquisition, re-distribution, forecasting, and other mamagement decisions
- A.
Oracle Discoverer Plus
- B.
Enterprise Solution-Supply
- C.
Standard Asset Tracking System
- D.
Weapon System Management Information System
Correct Answer
B. Enterprise Solution-SupplyExplanation
Enterprise Solution-Supply is the correct answer because it is a system that provides the ability to make repair, deployment, sourcing, maintenance, acquisition, redistribution, forecasting, and other management decisions. This system is specifically designed to handle all aspects of supply chain management, allowing organizations to effectively manage their inventory, logistics, and procurement processes.Rate this question:
-
- 33.
The intent of the Enterprise Asset Visibility component is to provide complete visibility of Air Force
- A.
Owned assets
- B.
Sourced assets
- C.
Asset shortages
- D.
Repairable assets
Correct Answer
A. Owned assetsExplanation
The Enterprise Asset Visibility component aims to offer a comprehensive view of the assets owned by the Air Force. This means that it provides a way to track and monitor all the assets that belong to the Air Force, allowing for better management and decision-making. It ensures that the Air Force has complete visibility and control over its owned assets, enabling efficient utilization and maintenance of these resources.Rate this question:
-
- 34.
One of the primary functions that Enterprise Solution-Supply (ES-S) offers is the ability to
- A.
Migrate orders into Weapon System Management Information System (WSMIS)
- B.
Input orders into the legacy Material Management System
- C.
Update orders in the Standard Asset Tracking System (SATS)
- D.
Transfer orders into Discover
Correct Answer
B. Input orders into the legacy Material Management SystemExplanation
ES-S offers the ability to input orders into the legacy Material Management System. This means that ES-S allows users to enter orders into the existing Material Management System, which is a part of the enterprise solution. This functionality helps in streamlining the order management process and ensures that all orders are properly recorded and tracked in the legacy system.Rate this question:
-
- 35.
In Enterprise Solution-Supply (ES-S), which is not a type of order provided by the Order Placement Page
- A.
Requestion
- B.
Common Issue
- C.
Depot Retail Issue
- D.
Maintenance Issue
Correct Answer
D. Maintenance IssueExplanation
The correct answer is "Maintenance Issue". In the context of the Enterprise Solution-Supply (ES-S), the Order Placement Page provides different types of orders for various purposes such as requesting a product or service (Requestion), addressing common issues, and handling depot retail issues. However, "Maintenance Issue" is not one of the types of orders offered by the Order Placement Page.Rate this question:
-
- 36.
Enterprise Solution-Supply (ES-S) provides the capability to query and view orders in what three legacy systems
- A.
D043; SATS; Material Management System
- B.
D035A; SATS; Material Management System
- C.
Material Management System; D035A; D035K
- D.
D035A; D035K; D043
Correct Answer
C. Material Management System; D035A; D035KExplanation
The correct answer is Material Management System; D035A; D035K. This is because the question asks for the three legacy systems that can be queried and viewed using ES-S. The options D043 and SATS are not mentioned in the question and therefore cannot be considered as correct answers.Rate this question:
-
- 37.
In Enterprise Solution-Supply (ES-S), what three sections is the Order Selection Page divided into
- A.
Basic Selection Criteria, Additional Selection Criteria, and Display Criteria
- B.
Required Selection Criteria, Optional Selection Criteria, and Display Criteria
- C.
Order Selection Criteria, Supplement Selection Criteria, and Display Criteria
- D.
Primary Selection Criteria, Secondary Selection Criteria, and Display Criteria
Correct Answer
D. Primary Selection Criteria, Secondary Selection Criteria, and Display CriteriaExplanation
The Order Selection Page in Enterprise Solution-Supply (ES-S) is divided into three sections: Primary Selection Criteria, Secondary Selection Criteria, and Display Criteria. These sections allow users to specify the main criteria for selecting orders, additional criteria for refining the selection, and the display settings for how the selected orders are presented.Rate this question:
-
- 38.
What function provides the ability to query all Enterprise Solution-Supply (ES-S) transactions from a single user interface
- A.
Asset Query
- B.
Audit Data Query
- C.
Process Orders Query
- D.
Process Standard Base Supply System Transactions
Correct Answer
B. Audit Data QueryExplanation
The Audit Data Query function provides the ability to query all Enterprise Solution-Supply (ES-S) transactions from a single user interface. This function allows users to retrieve and analyze audit data related to ES-S transactions, providing valuable insights and enabling efficient monitoring and control of the supply chain processes.Rate this question:
-
- 39.
The Audit Data Query enhances your ability to query transaction information efficently for what types of audits
- A.
Management and inventory
- B.
Issue and requestion
- C.
Internal and external
- D.
Single and multiple
Correct Answer
C. Internal and externalExplanation
The Audit Data Query enhances your ability to query transaction information efficiently for internal and external audits. This means that you can use this tool to retrieve and analyze transaction data for audits conducted within your organization as well as audits conducted by external entities such as regulatory bodies or external auditors.Rate this question:
-
- 40.
The core of asset management is the
- A.
TRACKER
- B.
Stock Control System
- C.
Recoverable Assembly Process
- D.
Recoverable Consumption Items Requisitions System – D041
Correct Answer
B. Stock Control SystemExplanation
The correct answer is the Stock Control System. This is because asset management involves keeping track of various assets, such as stocks, to ensure their proper control and utilization. A Stock Control System helps in monitoring and managing the inventory levels, tracking stock movements, and optimizing stock replenishment processes. It enables organizations to maintain accurate stock records, avoid stockouts or overstocking, and make informed decisions regarding stock management.Rate this question:
-
- 41.
What on-line system combines the issue, shipment, receipt, and transfer of wholesale and retail material
- A.
Stock Control System (SCS)
- B.
Logistics Information Network (LINK)
- C.
Visual Logistics Information Processing System (VLIPS)
- D.
Standard Automated Material Management System (SAMMS)
Correct Answer
A. Stock Control System (SCS)Explanation
The Stock Control System (SCS) is an online system that combines the issue, shipment, receipt, and transfer of wholesale and retail material. It is designed to efficiently manage and track inventory levels, ensuring that materials are available when needed and reducing the risk of stockouts or overstocking. The SCS helps streamline the logistics and supply chain processes, improving overall efficiency and reducing costs. It provides real-time visibility into inventory levels, allowing for better planning and decision-making.Rate this question:
-
- 42.
Which system provides the user with information on their requisitions, with emphasis placed on the flight line base level user
- A.
TRACKER
- B.
RAMPS
- C.
LINK
- D.
SCS
Correct Answer
A. TRACKERExplanation
TRACKER is the system that provides the user with information on their requisitions, specifically focusing on the flight line base level user.Rate this question:
-
- 43.
Which module has standalone capability used by unit commanders to determine their war fighting capabilities
- A.
Pipline Performance
- B.
Supportability, Analysis, and Visibility
- C.
Dyna-Metric Microcomputer Analysis System
- D.
Weapon System Management Information System
Correct Answer
C. Dyna-Metric Microcomputer Analysis SystemExplanation
The Dyna-Metric Microcomputer Analysis System is the module that has standalone capability used by unit commanders to determine their war fighting capabilities. This system provides analysis and visibility into various metrics and data related to weapon systems and performance. It allows commanders to assess their capabilities and make informed decisions based on the information provided by the system.Rate this question:
-
- 44.
Which module supports repair execution, item distribution, and manages flow of recoverable assets in and out of depot repair
- A.
Readiness Assement Module
- B.
Propulsion Requirement System
- C.
Requirements/Excution Avilability Logistics Module
- D.
Excution and Prioritization of Repair Support System
Correct Answer
D. Excution and Prioritization of Repair Support SystemExplanation
The correct answer is Execution and Prioritization of Repair Support System. This module supports the execution of repairs, the distribution of items, and manages the flow of recoverable assets in and out of depot repair. It ensures that repairs are carried out efficiently and prioritizes them based on their importance.Rate this question:
-
- 45.
What has the capability to support multiple full Material Management System accounts
- A.
LSC
- B.
DECCs
- C.
HQ SSG
- D.
OSSG
Correct Answer
B. DECCsExplanation
DECCs (Defense Enterprise Computing Centers) have the capability to support multiple full Material Management System accounts. DECCs are responsible for providing information technology support to the Department of Defense (DoD) and they play a crucial role in managing and maintaining various systems, including Material Management Systems. These centers have the necessary infrastructure and expertise to handle multiple accounts efficiently, ensuring smooth operations and effective management of materials within the DoD.Rate this question:
-
- 46.
Establishing connectivity between a desktop personnal computer (PC) and the mainframe computer is done with a terminal emulation program called
- A.
Interface Processing Facility
- B.
INFOConnect
- C.
SATS
- D.
OSSG
Correct Answer
B. INFOConnectExplanation
INFOConnect is a terminal emulation program that is used to establish connectivity between a desktop personal computer (PC) and a mainframe computer. It allows the PC to emulate a terminal, enabling the user to access and interact with the mainframe system.Rate this question:
-
- 47.
Prior to the personnal computer, what did INFOConnect give you access to
- A.
Green screens
- B.
Blue screens
- C.
Mainframe
- D.
Internet
Correct Answer
A. Green screensExplanation
INFOConnect gave you access to green screens. Green screens were commonly used in the early days of computing, before the personal computer became popular. They were text-based interfaces that allowed users to interact with mainframe computers. The green screens displayed text and prompts, and users would enter commands or data using a keyboard. This allowed users to access and use the mainframe's capabilities for various tasks and applications.Rate this question:
-
- 48.
What type of variable begins with a dollar ($) sign and have preset names
- A.
Set
- B.
User
- C.
System
- D.
Notation
Correct Answer
C. SystemExplanation
Variables that begin with a dollar sign ($) and have preset names are known as system variables. These variables are predefined by the system and are used to store important information or settings that are required for the proper functioning of the system. They are commonly used in programming languages like PHP, where system variables such as $_POST and $_GET are used to retrieve user input from forms or URLs.Rate this question:
-
- 49.
What interactive processing facility command allows you to add images saved in other files to you job stream
- A.
IN
- B.
ADD
- C.
CALL
- D.
ACCEPT
Correct Answer
A. INExplanation
The correct answer is "IN". The IN command is an interactive processing facility command that allows you to add images saved in other files to your job stream.Rate this question:
-
- 50.
Which interactive processing facility command changes the name of the workspace
- A.
XQT
- B.
NAME
- C.
ACCEPT
- D.
CHANGE
Correct Answer
B. NAMEExplanation
The correct answer is "NAME" because the command "NAME" is used to change the name of the workspace in the interactive processing facility. This command allows users to give a new name to the workspace, which can help in organizing and identifying different workspaces more effectively.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 19, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 21, 2011Quiz Created by
Dlowther
- ACA Quizzes
- ACCA Quizzes
- ACE Quizzes
- BCBA Quizzes
- CCP Quizzes
- CDCs Quizzes
- CEH Quizzes
- CISA Quizzes
- CISCO Quizzes
- CISSP Quizzes
- CompTIA Quizzes
- CPA Quizzes
- CPAT Quizzes
- CPFA Quizzes
- CPP Quizzes
- CPT Quizzes
- CSA Quizzes
- CSET Quizzes
- CST Quizzes
- CSWIP Quizzes
- FTCE Quizzes
- HIPAA Quizzes
- IAHCSMM Quizzes
- ISTQB Quizzes
- LEED Ga Quizzes
- MBLEx Quizzes
- TEAS Quizzes
Back to top