2015 -- Product Engineering Center Fire

1. Who do you take instructions from in regards to Evacuating the building?

Other Security Officers

John Deere Supervisor/Manager or Fire Brigade Leader

Any John Deere Employees

Anybody

2. PEC Security should contact Gate 3 Security and inform them to stop all incoming vehicle until the emergency situation has passed.

True

False

3. What circumstance(s) are required for a situation to be considered a Fire Emergency? (check all that apply)

Smoke Reported

Flame Reported

Checking out a Badge

Fire Alarm

Submit

4. The four simple steps for operating a fire extinguisher can be remembered with the word PASS. What does PASS stand for?

Punch, Aim, Side, Sweep

Push, Aim, Sweep, Squeeze

Pull, Aim, Sweep, Squeeze

Pull, Aim, Squeeze, Sweep

P - Stands for PULL the Pin.

A- Stands for AIM at the base of the Fire

S - Stands for SQUEEZE the Handle

S - Stands for SWEEP at the base of the fire until extinguished.

Explanation

P - Stands for PULL the Pin.

A- Stands for AIM at the base of the Fire

S - Stands for SQUEEZE the Handle

S - Stands for SWEEP at the base of the fire until extinguished.

5. How do you notify the John Deere Fire Brigade?

On the phone

Using the Base radio and changing to channel to 16 (Site All Call)

Using the Base radio and changing to Channel 1 (Security Call)

Pager

Notification Instructions:

Using the base radio, the local main Security office will: switch the radio channel to “Site All Call”.

· EW: Channel 16

· DTO: Maintenance Zone > Channel 16

· PEC: Channel 16

· Foundry: Channel 16

· TCAO Maintenance > Channel 16

Explanation

Notification Instructions:

Using the base radio, the local main Security office will: switch the radio channel to “Site All Call”.

· EW: Channel 16

· DTO: Maintenance Zone > Channel 16

· PEC: Channel 16

· Foundry: Channel 16

· TCAO Maintenance > Channel 16

6. Each facility has a different person to contact for Safety TERT (Tactical Emergency Response Team).

True

False

DTO - Rodney Olsen
PEC - Keith Pitzen
Foundry/SPO - Bradley Westendorf
TCAO - Charles Larson
EW - Kevin Smith

Explanation

DTO - Rodney Olsen
PEC - Keith Pitzen
Foundry/SPO - Bradley Westendorf
TCAO - Charles Larson
EW - Kevin Smith

7. The four elements that must be present for fire to exist include heat, oxygen, fuel, and a chemical reaction between the three.

True

False

There must be Oxygen to sustain the combustion, Heat to raise the material to its ignition temperature, Fuel to suppose the combustion and a Chemical Reaction between the other three elements.

Remove any one of the four elements to extinguish the fire.

Explanation

There must be Oxygen to sustain the combustion, Heat to raise the material to its ignition temperature, Fuel to suppose the combustion and a Chemical Reaction between the other three elements.

Remove any one of the four elements to extinguish the fire.

8. When a fire occurs at your facility, what is the first thing you do?

Call 911

Find the Policy in the Security Web and follow step by step

Find the Policy in the Security Web and don't follow it

Evacuate the Building

9. Officers should let the Evacuation Alarm to run until a member of the John Deere Management, IRT, TERT or Fire Brigade orders "All Clear"

True

False

10. What is Step 4 of the Fire Emergency Plan?

Call your designated ambulance entrance to inform them of the emergency

Notify ONE person from Safety TERT

Dispatch Mobile Security Officer to escort the Fire Department

Notify your Security Supervisor

11. After an all clear has been giving for a evacuation, PEC Security should contact DTO Security who will use Send Word Now "All Clear Scenario"

True

False

12. DTO Security will use what system to notify Waterloo Works managers they are seeking shelter?

Send Word Now

Evacuate

Seek Shelter

Call the Supervisor

13. A security officer should be sent out to all the Evacuation Gathering Points to notify employees that it is safe to return to normal business operation.

True

False

Send a Security Officer around to all Evacuation Gathering Points to notify
employees that it is safe to return to normal business operations.

Explanation

Send a Security Officer around to all Evacuation Gathering Points to notify
employees that it is safe to return to normal business operations.

14. There are four classes of fire, Class A, B, C, and K

True

False

Class A - extinguishers are for fires involving cloth, wood, paper, rubber and certain plastics. These materials are known as ordinary combustibles.

Class B - extinguishers are for fires that involve combustible and flammable liquids. This includes gasoline, oil and certain gases

Class C - extinguishers are used on fires caused by energized electrical equipment. Fires can start because of wiring, circuit breakers or fuse boxes

Class D - extinguishers are used for fire caused by combustible metals such as sodium, magnesium and titanium.

Class K - extinguishers are specialty extinguishers found in restaurants and kitchens.

Explanation

Class A - extinguishers are for fires involving cloth, wood, paper, rubber and certain plastics. These materials are known as ordinary combustibles.

Class B - extinguishers are for fires that involve combustible and flammable liquids. This includes gasoline, oil and certain gases

Class C - extinguishers are used on fires caused by energized electrical equipment. Fires can start because of wiring, circuit breakers or fuse boxes

Class D - extinguishers are used for fire caused by combustible metals such as sodium, magnesium and titanium.

Class K - extinguishers are specialty extinguishers found in restaurants and kitchens.

15. When a Evacuation has been ordered: Security will press the "Signal Bypass" button to take the System of Bypass. What is the next step?

Press the "Manual Evac" button

Make announcement over radio from the "PEC Site All Call" to evacuate

Notify Gate 3 to stop traffic

Notify your Security Supervisor

16. After the incident, Security should tour the building and report any damages to who?

IRT and Security Supervisor

Security Supervisor and TERT

TERT and IRT

Nobody

17. After the ALL CLEAR has been given, what is the first step to stop the alarm.

Press the "All Cleaer Office and Shop" on the Simplex Fire Panel

Contact Gate 3 to inform them "All Clear"

Press the “Manual Evac” button to stop the evacuation alarm.

Make the "All Clear" Announcement on the Radio

18. If an officer closes the Gate, what should they take with them. (Check ALL that apply)

Radio

Cell Phone

Gate Keys

Medical Bag

AED

Car Keys

Computer

Bolt Cutters

Safety Glasses

Submit

19. Match the explanation with the correct step within the Fire Policy.

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Submit