Test Your Knowledge About Population Section!
-
What is the name given to the rapid growth of world population that has taken place since the industrial revolution?
-
Population crash
-
Population bomb
-
Population explosion
-
Population bang
-
Population dive
-
A population is a group of people living in a geographical area who share similar cultures. It is not uncommon for there to be a census designed to know the total number of people in an area. Having covered a topic on population section the quiz below is designed to see how much you understood.
Quiz Preview
- 2.
What two words could be used to describe the growth of the world population?
-
Exponential
-
Arithmetic
-
Logarithmic
-
Steady
-
Constant
Correct Answer(s)
A. Exponential
A. LogarithmicExplanation
The growth of the world population can be described as exponential because it is increasing at an accelerating rate over time. This means that the population is growing faster and faster as time goes on. Additionally, the growth can also be described as logarithmic because the rate of growth gradually slows down as the population approaches its carrying capacity.Rate this question:
-
- 3.
How is population density calculated?
-
Area divided by population
-
Population divided by GNP
-
Resource capacity divided by population
-
Population multiplied by area
-
Population divided by area
Correct Answer
A. Population divided by areaExplanation
Population density is calculated by dividing the total population of a given area by the total land area of that area. This calculation provides a measure of how crowded or densely populated an area is. By dividing the population by the area, we can determine the average number of individuals per unit of land, which helps in understanding the level of congestion or distribution of population in a particular region.Rate this question:
-
- 4.
What is the geographic term for a country with a high population density?
-
A densely populated country
-
An open country
-
An overpopulated country
-
A sparsely populated country
-
An underpopulated country
Correct Answer
A. A densely populated countryExplanation
A densely populated country refers to a geographic term for a country with a high population density. This means that the country has a large number of people living in a relatively small area. The term "densely populated" indicates that the population is concentrated and crowded, resulting in a high population density.Rate this question:
-
- 5.
Which one of these countries is an example of a country with a high population density?
-
Canada
-
Bangladesh
-
Australia
-
USA
-
Russia
Correct Answer
A. BangladeshExplanation
Bangladesh is an example of a country with a high population density because it has a large population living in a relatively small land area. With over 160 million people, Bangladesh has one of the highest population densities in the world. Its small size and high population contribute to overcrowding and limited resources, making it a prime example of high population density.Rate this question:
-
- 6.
What is the geographic term for a country with a low population density?
-
A densely populated country
-
A closed country
-
An underpopulated country
-
A sparsely populated country
-
An overpopulated country
Correct Answer
A. A sparsely populated countryExplanation
A sparsely populated country refers to a geographic term for a country with a low population density. This means that the country has a small number of people relative to its land area. The term "sparsely populated" indicates that the population is spread out thinly across the country, with large areas of land having few inhabitants.Rate this question:
-
- 7.
Which one of these regions is an example of a country with a low population density?
-
The south east of the UK
-
New Delhi in India
-
The Canadian Northlands
-
The Japanese coastline
-
The Leeds Bradford conurbation in the UK
Correct Answer
A. The Canadian NorthlandsExplanation
The Canadian Northlands is an example of a country with a low population density because it is a vast and sparsely populated region in Canada. It is characterized by its remote and rugged terrain, harsh climate, and limited infrastructure, which makes it difficult for people to live there in large numbers.Rate this question:
-
- 8.
Which one of these statements best describes the population distribution within the USA?
-
The interior of the US generally has a high population density
-
The coasts of the US generally have a low population density
-
The US is sparsely populated
-
The US is densely populated
-
Some parts of the US are densely populated, other parts are sparsely populated
Correct Answer
A. Some parts of the US are densely populated, other parts are sparsely populatedExplanation
The correct answer is that some parts of the US are densely populated, while other parts are sparsely populated. This statement accurately describes the population distribution within the USA. The country has densely populated areas, such as major cities and urban centers, where a large number of people reside. On the other hand, there are also vast areas of the US that are sparsely populated, such as rural regions, deserts, and mountainous areas. The population distribution within the USA is not uniform, with variations in density across different regions.Rate this question:
-
- 9.
Which one of these statements best describes a theoretical situation where the number of resources match the population of an area?
-
Overpopulation
-
Optimum population
-
Under population
-
Dense population
-
Sparse population
Correct Answer
A. Optimum populationExplanation
Optimum population refers to a theoretical situation where the number of resources available in an area perfectly matches the population size. In this scenario, there is neither overpopulation, where the population exceeds the available resources, nor underpopulation, where the resources exceed the population size. Optimum population suggests a balance between the population and available resources, ensuring that the needs of the population can be adequately met without straining the resources of the area.Rate this question:
-
- 10.
Which of the following statements is correct for the first stage of the demographic transition model?
-
Birth rate high, death rate high and fluctuating, total population low and constant
-
Birth rate high, death rate high, total population increasing
-
Birth rate low, death rate high, total population low and constant
-
Birth rate low, death rate low, total population low
-
Birth rate high, death rate low, total population low and constant
Correct Answer
A. Birth rate high, death rate high and fluctuating, total population low and constantExplanation
In the first stage of the demographic transition model, the correct statement is that the birth rate is high, the death rate is high and fluctuating, and the total population is low and constant. This means that the population is primarily sustained by high birth rates, but the death rate is also high due to factors such as disease, famine, and lack of medical advancements. As a result, the total population remains relatively low and stable.Rate this question:
-
- 11.
Which of the following statements is correct for the third stage of the demographic transition model?
-
Birth rate high, death rate falling, total population increasing
-
Birth rate low, death rate low, total population high and constant
-
Birth rate falling, death rate high, total population increasing
-
Birth rate falling, death rate falling, total population increasing
-
Birth rate high, death rate low, total population high and constant
Correct Answer
A. Birth rate falling, death rate falling, total population increasingExplanation
In the third stage of the demographic transition model, the birth rate is falling, which means that there is a decrease in the number of births per 1,000 people in the population. The death rate is also falling, indicating a decrease in the number of deaths per 1,000 people. Despite the decrease in both birth and death rates, the total population is still increasing. This is because the decline in the death rate is greater than the decline in the birth rate, resulting in a net increase in the population size.Rate this question:
-
- 12.
Why is the birth rate low in stage four of the demographic transition model?
-
Lots of people work in farming and there is a high infant mortality rate
-
Hospital and sanitation facilities are starting to be developed
-
Most people work away from farming in factories and are moving to the cities
-
Diseases spread rapidly in insanitary conditions
-
More women are working and consumerism means that the cost of raising children is very high
Correct Answer
A. More women are working and consumerism means that the cost of raising children is very highExplanation
In stage four of the demographic transition model, the birth rate is low because more women are working and consumerism means that the cost of raising children is very high. As women become more involved in the workforce, they have less time and resources to devote to raising children. Additionally, the increasing cost of living and consumerism leads to higher expenses associated with raising children, such as education, healthcare, and other necessities. These factors contribute to a lower birth rate in stage four of the demographic transition model.Rate this question:
-
- 13.
Why is the death rate high and fluctuating in stage one of the demographic transition model?
-
Lots of people work in farming and there is a high infant mortality rate
-
Hospital and sanitation facilities are starting to be developed
-
Most people work away from farming in factories and are moving to the cities
-
Diseases spread rapidly in insanitary conditions
-
More women are working and consumerism means that the cost of raising children is very high
Correct Answer
A. Diseases spread rapidly in insanitary conditionsExplanation
In stage one of the demographic transition model, the death rate is high and fluctuating because diseases spread rapidly in insanitary conditions. This is due to the lack of proper sanitation facilities and healthcare infrastructure. In this stage, there is a high infant mortality rate as well, which contributes to the overall death rate. As societies transition from an agricultural-based economy to industrialization, more people move away from farming and into factories or cities. This shift in occupation and living conditions can lead to overcrowding, poor hygiene, and inadequate healthcare, creating an environment conducive to the rapid spread of diseases.Rate this question:
-
- 14.
Which one of these is not a problem associated with an overpopulated country?
-
Lack of workers to exploit the country's natural resources
-
Overcrowded cities
-
Lack of suitable housing
-
Deforestation
-
High unemployment and/or underemployment rates
Correct Answer
A. Lack of workers to exploit the country's natural resourcesExplanation
The lack of workers to exploit the country's natural resources is not a problem associated with an overpopulated country. In fact, overpopulation often leads to a surplus of labor, resulting in high unemployment and underemployment rates. The other options, such as overcrowded cities, lack of suitable housing, and deforestation, are commonly seen in overpopulated countries due to the strain on resources and infrastructure.Rate this question:
-
- 15.
When a population pyramid has a wide base it does not tend to have...
-
A high birth rate
-
A high death rate
-
A low life expectancy
-
An ageing population
-
A high infant mortality rate
Correct Answer
A. An ageing populationExplanation
When a population pyramid has a wide base, it indicates a larger proportion of young individuals in the population. This suggests a high birth rate, as there are more births occurring to contribute to the young age group. However, an ageing population refers to a population with a higher proportion of older individuals, typically represented by a narrower base in the population pyramid. Therefore, when a population pyramid has a wide base, it is less likely to have an ageing population.Rate this question:
-
- 16.
When a population pyramid has a narrow base it does not tend to have...
-
A high fertility rate
-
A low death rate
-
A high life expectancy
-
An ageing population
-
A low infant mortality rate
Correct Answer
A. A high fertility rateExplanation
When a population pyramid has a narrow base, it indicates a smaller proportion of young people in the population. This suggests a lower fertility rate, as there are fewer individuals of childbearing age. A high fertility rate would result in a wider base on the population pyramid, indicating a larger proportion of young people. Therefore, a narrow base on a population pyramid is associated with a low fertility rate.Rate this question:
-
- 17.
Which one of these is not a problem associated with an ageing society
-
Buildings have to be knocked down to make way for bungalows
-
Schools are overcrowded and many children must go without an education
-
Overcrowding within nursing homes
-
Hospital waiting lists lengthen
-
Nightclubs are forced to close down
Correct Answer
A. Schools are overcrowded and many children must go without an educationExplanation
The correct answer is "Schools are overcrowded and many children must go without an education." This answer is not a problem associated with an aging society because it is more related to a lack of infrastructure and resources in the education system rather than the effects of an aging population. The other options, such as buildings being knocked down for bungalows, overcrowding within nursing homes, hospital waiting lists lengthening, and nightclubs closing down, are all problems that can be associated with an aging society.Rate this question:
-
- 18.
What name do we give to people who are too young or too old to work?
-
Lazy
-
Dependants
-
Reliants
-
Benefits
-
Pensioners
Correct Answer
A. DependantsExplanation
The term "dependants" refers to individuals who are reliant on others for financial support, either due to being too young or too old to work. This includes children who are not yet of working age and elderly individuals who have retired and are no longer able to work. These individuals depend on others, such as parents, guardians, or the government, for their financial needs.Rate this question:
-
- 19.
How does one calculate the natural increase of a population?
-
Birth Rate + Death Rate
-
Death Rate x Birth Rate
-
Birth Rate - Death Rate
-
Birth Rate divided by Death Rate
-
Death Rate divided by Birth Rate
Correct Answer
A. Birth Rate - Death RateExplanation
The natural increase of a population is calculated by subtracting the death rate from the birth rate. This calculation takes into account the number of births and deaths within a population, and the difference between the two indicates whether the population is growing or declining.Rate this question:
-
Quiz Review Timeline (Updated): Apr 8, 2025 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Apr 08, 2025Quiz Edited by
ProProfs Editorial Team -
Apr 18, 2007Quiz Created by
Davidptongue
Back to top