Production Management Quiz
-
What is preventive maintenance?
-
Performing regularly scheduled maintenance activities
-
Performing irregular maintenance activities
-
Performing everyday maintenance activities
-
Performing maintenance activity after every task
-
Preparing for an Production Management exam? Take the well-researched quiz and revise the important topics. This quiz will; help you gauge the preparation levels of the subject. Production Management is one of the high-scoring and low-lying fruit for a student. This quiz has a wide range of questions that will help you ace the exam. Play this quiz to check See moreyour knowledge. If you like the quiz, share it with your friends. All the best!
(569).jpg "Production Management Quiz - Quiz")
Quiz Preview
- 2.
What is PPC?
-
It is the technique to plan each and every step in a long series of separate operation
-
It is technique to plan each and every step in short and clubbed operation
-
It is the technique to plan first few steps in short and separate operation
-
It is the technique to plan each and every step in short and separate operation
Correct Answer
A. It is the technique to plan each and every step in a long series of separate operationExplanation
PPC stands for Production Planning and Control. It is a technique used to plan each and every step in a long series of separate operations. This involves the careful coordination and scheduling of resources, materials, and activities to ensure efficient and timely production. By planning each step in detail, PPC helps to optimize productivity, minimize costs, and meet customer demands effectively.Rate this question:
-
- 3.
Which of the following is not a type of automation?
-
Loose Automation
-
Fixed Automation
-
Programmable Automation
-
Flexible Automation
Correct Answer
A. Loose AutomationExplanation
Loose Automation is not a type of automation. The other three options, Fixed Automation, Programmable Automation, and Flexible Automation, are all recognized types of automation. Fixed Automation refers to a system that performs a specific set of tasks repeatedly without any variation. Programmable Automation involves a system that can be reprogrammed to perform different tasks or sequences of operations. Flexible Automation refers to a system that can handle a variety of tasks and adapt to different production requirements. However, Loose Automation is not a recognized term or concept in the field of automation.Rate this question:
-
- 4.
What is the full form of PPC?
-
Production Performance and Control
-
Process Production and Control
-
Performance Production and Control
-
Production Planning and Control
Correct Answer
A. Production Planning and ControlExplanation
The full form of PPC is Production Planning and Control. This term refers to the process of managing and coordinating all activities related to production in order to meet the desired goals and objectives. It involves planning the production schedule, allocating resources, monitoring progress, and ensuring that the production process runs smoothly and efficiently. By implementing effective production planning and control strategies, organizations can optimize their production processes, minimize costs, and maximize productivity.Rate this question:
-
- 5.
The process of checking quality, performance and reliability is called
-
Testing
-
Servicing
-
Analysing
-
Inspecting
Correct Answer
A. TestingExplanation
Testing is the correct answer because it refers to the process of checking the quality, performance, and reliability of a product or system. This involves conducting various tests and experiments to identify any defects or issues and ensure that the product meets the required standards and specifications. Testing is an essential part of the development and manufacturing process to ensure that the final product is of high quality and functions as intended.Rate this question:
-
- 6.
What type of curves help in product design
-
Technology S- curves
-
Technology O- curves
-
Technology D- curves
-
Technology- P curves
Correct Answer
A. Technology S- curvesExplanation
Technology S-curves help in product design because they represent the relationship between the performance improvement of a technology and the time it takes for that improvement to occur. S-curves show that initially, there is slow progress in technology, but as it matures, the rate of improvement accelerates. Understanding these curves is crucial for product designers as it allows them to predict future advancements, plan for upgrades, and ensure that their designs remain competitive in the market.Rate this question:
-
- 7.
For what purpose acceptance sampling used for?
-
Batch production
-
Single production
-
Sample production
-
Mass production
Correct Answer
A. Mass productionExplanation
Acceptance sampling is used for the purpose of evaluating the quality of a mass production batch. It involves taking a sample from the batch and inspecting it to determine whether the quality of the entire batch meets the specified requirements. This method is commonly used when it is not feasible or practical to inspect every single unit in the batch. By using acceptance sampling, manufacturers can make informed decisions about whether to accept or reject the entire batch based on the quality of the sample.Rate this question:
-
- 8.
Example of non-biodegradable waste is?
-
Food waste
-
Green waste
-
Plastic waste
-
None of the above
Correct Answer
A. Food wasteExplanation
The given question asks for an example of non-biodegradable waste. Biodegradable waste refers to substances that can be broken down and decomposed by natural processes. Food waste, being organic in nature, is biodegradable. On the other hand, plastic waste is a common example of non-biodegradable waste as it cannot be easily broken down by natural processes and remains in the environment for a long time. Therefore, the correct answer is plastic waste.Rate this question:
-
- 9.
What do you understand by Product layout?
-
An arrangement of various machine run to produce initial product in prescribed order
-
An arrangement of various machines run to produce intermediate product
-
An arrangement of various machines run to produce the final product in a prescribed order
-
None of the above
Correct Answer
A. An arrangement of various machine run to produce initial product in prescribed orderExplanation
Product layout refers to an arrangement of various machines that are operated in a prescribed order to produce the initial product. This layout is commonly used in manufacturing processes where the production involves a sequential flow of operations. It ensures that each machine performs its specific task in a predetermined order, allowing for efficient and streamlined production. This layout is different from producing intermediate products or the final product, as it specifically focuses on the initial product.Rate this question:
-
- 10.
Which one of the following techniques is used for determining allowances in time study?
-
Acceptance sampling
-
Performance sampling
-
Functional sampling
-
Work sampling
Correct Answer
A. Work samplingExplanation
Work sampling is a technique used for determining allowances in time study. It involves observing and recording the activities of workers at various intervals to determine the proportion of time spent on different tasks. This method allows for a more accurate assessment of the time required for each task and helps in determining the appropriate allowances for factors such as fatigue, delays, and interruptions. By sampling work activities, it provides a representative picture of the overall work process and helps in making informed decisions regarding time allowances.Rate this question:
-
Quiz Review Timeline (Updated): Aug 21, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Aug 21, 2023Quiz Edited by
ProProfs Editorial Team -
Oct 06, 2013Quiz Created by
Mike Murphy
Back to top