Bisd Transportation - School Bus Quiz #1 | Attempts: 875

2.

What are "prohibited practices" while operating a bus?

Avoid fueling with riders onboard
Don't talk to riders while driving
Don't tow or push a disabled bus with riders onboard
All of the above

Correct Answer

A. All of the above

Explanation

The correct answer is "All of the above." This means that all of the mentioned practices, including fueling with riders onboard, talking to riders while driving, and towing or pushing a disabled bus with riders onboard, are prohibited while operating a bus. These practices can pose risks to the safety of the passengers and should be avoided to ensure a safe and smooth journey.

Rate this question:

3.

When approaching a school bus stop you should activate your overhead amber lights how far from the bus stop?

100 feet
200 feet
300 feet

Correct Answer

A. 300 feet

Explanation

When approaching a school bus stop, it is important to activate your overhead amber lights 300 feet away from the bus stop. This is necessary to alert other drivers that you are approaching a school bus stop and that they should be prepared to stop. By activating the amber lights at this distance, it allows drivers behind you enough time to slow down and stop safely when the bus is picking up or dropping off children.

Rate this question:

4.

Urban mass transit coaches may have a brake and accelerator interlock system. The rear door of a transit bus has to be open to set the parking brake.

True
False

Correct Answer

A. False

Explanation

The statement is false because urban mass transit coaches do not have a brake and accelerator interlock system. The rear door of a transit bus does not need to be open to set the parking brake.

Rate this question:

5.

School bus drivers must have a commercial driver's license and:

Passenger and Combination Vehicle endorsements
Air Brake and Tank endorsements
School Bus and Passenger endorsements
None of the above

Correct Answer

A. School Bus and Passenger endorsements

Explanation

School bus drivers must have a commercial driver's license and School Bus and Passenger endorsements. These endorsements indicate that the driver has met the specific requirements and qualifications necessary to safely transport passengers, particularly school children. The endorsements ensure that the driver is knowledgeable about the rules and regulations specific to operating a school bus and handling passengers. It also demonstrates their ability to handle emergency situations and ensure the safety of the students on board. The combination of a commercial driver's license and these endorsements is necessary for a school bus driver to legally and safely perform their job.

Rate this question:

6.

Always load/unload students on the right outside lane if on a multi-lane road

True
False

Correct Answer

A. True

Explanation

Loading and unloading students on the right outside lane is the correct practice on a multi-lane road because it allows for safer and more efficient drop-off and pick-up. By using the right outside lane, the bus is closer to the sidewalk, reducing the distance students have to cross the road. It also minimizes the interaction between students and moving traffic, reducing the risk of accidents. Additionally, it allows other vehicles to pass the bus on the left lanes, preventing traffic congestion. Therefore, the statement is true.

Rate this question:

1

7.

What is one of the more dangerous procedures a school bus driver must undertake?

Driving in traffic
Loading and unloading students
Driving in the rain
Training replacement drivers

Correct Answer

A. Loading and unloading students

Explanation

Loading and unloading students is one of the more dangerous procedures a school bus driver must undertake. This is because during this process, the driver is responsible for ensuring the safety of the students as they enter and exit the bus. There is a risk of accidents, such as students falling or getting caught in the closing doors. Additionally, the driver must be vigilant of other vehicles on the road and ensure that students are safely crossing the street. Overall, the process of loading and unloading students requires careful attention and precaution to prevent any harm or accidents.

Rate this question:

8.

Immediately after stopping at a bus stop you should:

Open the entrance door slightly to activate the stop arms and overhead red warning lights
Tell the children to stand back until you are ready for them to load
Get the children onto the bus as quickly as possible
Turn the engine off and open the door

Correct Answer

A. Open the entrance door slightly to activate the stop arms and overhead red warning lights

Explanation

After stopping at a bus stop, it is important to open the entrance door slightly to activate the stop arms and overhead red warning lights. This is done to alert other drivers on the road that the bus has stopped and children will be getting on or off the bus. It is a safety measure to ensure that other vehicles are aware of the bus's presence and can take necessary precautions. This step should be taken before allowing the children to load onto the bus or turning off the engine.

Rate this question:

9.

Are recapped or re-grooved tires allowed on buses?

Yes, on all wheels
Yes, on all wheels except the front wheels
No recapped or re-grooved tires are not allowed on buses
As a spare only

Correct Answer

A. Yes, on all wheels except the front wheels

Explanation

Recapped or re-grooved tires are allowed on buses, but not on the front wheels. This means that buses can use recapped or re-grooved tires on all of their wheels except for the front ones. The front wheels need to have new tires instead of recapped or re-grooved ones.

Rate this question:

1

10.

A school bus driver must also check the amber alternating flashing lights indicator, the red alternating flashing lights indicator and the strobe light indicator, if equipped.

True
False

Correct Answer

A. True

Explanation

A school bus driver must check the amber alternating flashing lights indicator, the red alternating flashing lights indicator, and the strobe light indicator, if equipped. This is important for the safety of the passengers and other drivers on the road. The amber lights indicate that the bus is preparing to stop, while the red lights indicate that the bus has stopped and children are getting on or off. The strobe light, if present, helps to make the bus more visible to other drivers, especially in low light conditions. Therefore, it is necessary for the school bus driver to check these indicators to ensure the proper functioning of the lights and to follow safety protocols.

Rate this question:

2

Bisd Transportation - School Bus Quiz #1

How far from a railroad crossing should you stop?

Quiz Preview

What are "prohibited practices" while operating a bus?

When approaching a school bus stop you should activate your overhead amber lights how far from the bus stop?

Urban mass transit coaches may have a brake and accelerator interlock system. The rear door of a transit bus has to be open to set the parking brake.

School bus drivers must have a commercial driver's license and:

Always load/unload students on the right outside lane if on a multi-lane road

What is one of the more dangerous procedures a school bus driver must undertake?

Immediately after stopping at a bus stop you should:

Are recapped or re-grooved tires allowed on buses?

A school bus driver must also check the amber alternating flashing lights indicator, the red alternating flashing lights indicator and the strobe light indicator, if equipped.