Personal Protective Equipment Quiz
-
Personal Protective Equipment is required when:
-
Employer suffers from an injury
-
Employee suffers from an injury
-
An employee asks for it
-
Engineering, work practice, and administrative controls do not provide sufficient protection against hazards
-
Immerse yourself in the realm of safety gear with the Personal Protective Equipment Quiz. This quiz is designed to evaluate your knowledge about the essential protective gear used across various industries. From hard hats to respirators, gloves to safety glasses, test your understanding of the purpose, correct usage, and standards associated with different types of Personal Protective Equipment (PPE).
Whether See moreyou are a safety professional, an employee in a hazardous environment, or simply curious about workplace safety, this quiz offers an insightful journey into the world of protective measures. Explore the significance of PPE in maintaining a secure work environment and enhance your awareness of the gear that safeguards individuals from occupational hazards. Elevate your understanding of workplace safety by participating in this informative and engaging PPE quiz.
Quiz Preview
- 2.
What is the purpose of the PPE standard?
-
Proper selection, use and maintenance
-
Disposal of PPEs
-
A and B
-
None of these.
Correct Answer
A. A and BExplanation
The purpose of the PPE standard is to ensure the proper selection, use, and maintenance of personal protective equipment (PPE). This standard also covers the proper disposal of PPEs. Therefore, the correct answer is A and B, as both options are included in the purpose of the PPE standard.Rate this question:
-
- 3.
Who is responsible for use and caring of PPE?
-
Line management
-
Safety officer
-
Supervisor
-
Employee
Correct Answer
A. EmployeeExplanation
The correct answer is "Employee." Employees are responsible for the proper use and care of personal protective equipment (PPE). It is their duty to follow safety protocols, wear the provided PPE correctly, and maintain its cleanliness and functionality. By taking responsibility for PPE, employees contribute to maintaining a safe and healthy work environment for themselves and their colleagues.Rate this question:
-
- 4.
Who is the Lead Plant for PPE Standard?
-
Jamshedpur
-
Pantnagar
-
Pune CV
-
Lucknow
Correct Answer
A. JamshedpurExplanation
Jamshedpur is the Lead Plant for PPE Standard. This means that Jamshedpur is responsible for leading the production and implementation of the PPE (Personal Protective Equipment) Standard. As the Lead Plant, Jamshedpur is likely to have expertise and resources dedicated to ensuring that the PPE Standard is effectively implemented and followed across the organization or industry.Rate this question:
-
- 5.
The workplace environment shall be reviewed to identify and evaluate potential safety, health, and environmental hazard.
-
In every three years,
-
After major change in process or operation
-
After accident
-
All of these
Correct Answer
A. All of theseExplanation
The workplace environment should be regularly reviewed to identify and evaluate potential safety, health, and environmental hazards. This should be done every three years as a routine practice, as well as after any major change in process or operation. Additionally, it is important to conduct a review after any accidents that occur in order to identify and address any hazards that may have contributed to the incident. Therefore, all of these options are correct and necessary for ensuring a safe and healthy work environment.Rate this question:
-
- 6.
Required PPE shall be identified through:
-
HIRA and Indian standards(IS)
-
By Own
-
As per Safety Departments advise
-
As per supervisor advise
Correct Answer
A. HIRA and Indian standards(IS)Explanation
The required PPE shall be identified through HIRA (Hazard Identification and Risk Assessment) and Indian standards (IS). HIRA helps in identifying potential hazards and assessing the associated risks, which then helps determine the appropriate PPE required for protection. Indian standards (IS) provide guidelines and specifications for various safety equipment, including PPE, ensuring that they meet the necessary quality and safety standards. Therefore, using HIRA and Indian standards is the correct approach to identify the required PPE.Rate this question:
-
- 7.
Indian Standard(IS) code for safety helmet:
-
IS: 2935:1985
-
IS 2925:1984
-
IS 2939:1986
-
IS: 2925:1983
Correct Answer
A. IS 2925:1984Explanation
The correct answer is IS 2925:1984. This is the Indian Standard (IS) code for safety helmets. The code provides specifications for the design, materials, and performance requirements of safety helmets to ensure the safety and protection of individuals working in hazardous environments or industries. The year 1984 indicates the year in which the code was published.Rate this question:
-
- 8.
Is Face shield a substitute for eye protection.
-
YES
-
NO
Correct Answer
A. NOExplanation
Face shields are not a substitute for eye protection because they do not provide the same level of coverage and protection as safety glasses or goggles. While face shields may protect the face from splashes, they do not fully cover the eyes and may leave them vulnerable to impact or debris. Therefore, it is important to use appropriate eye protection in addition to face shields when necessary.Rate this question:
-
- 9.
Employee who is exposed to noise levels that exceed ___dB must wear hearing protection as per PPE Standard.
-
84dB
-
90dB
-
85dB
-
80dB
Correct Answer
A. 85dBExplanation
According to the PPE Standard, employees who are exposed to noise levels exceeding 85dB must wear hearing protection. This indicates that the correct answer is 85dB.Rate this question:
-
- 10.
Fluorescent jackets shall be worn by:
-
All Contract employee
-
Security
-
All material handling equipment drivers and helper
-
All above
Correct Answer
A. All aboveExplanation
The correct answer is "All above". This means that fluorescent jackets should be worn by all contract employees, security personnel, and all material handling equipment drivers and helpers.Rate this question:
-
- 11.
Full Flash protection must confirm to:
-
NFPA 80 E
-
NFPA 75 E
-
NFPA 90 E
-
NFPA 70 E
Correct Answer
A. NFPA 70 EExplanation
NFPA 70 E is the correct answer because it specifically addresses electrical safety in the workplace. It provides guidelines for identifying electrical hazards, implementing safety procedures, and selecting appropriate personal protective equipment (PPE) to protect workers from electrical accidents. NFPA 80 E, NFPA 75 E, and NFPA 90 E are not relevant to flash protection or electrical safety in the same way that NFPA 70 E is.Rate this question:
-
- 12.
Full Body Harness Lanyard length should not exceed:
-
2 meter
-
1.8 meter
-
1.1 meter
-
1.5 meter
Correct Answer
A. 1.8 meterExplanation
The correct answer is 1.8 meters because a lanyard length exceeding this limit can pose a safety risk. A longer lanyard may allow a person to fall too far before the fall arrest system engages, increasing the risk of injury. Keeping the lanyard length within the recommended limit ensures that the person wearing the full body harness remains safe and secure while working at heights.Rate this question:
-
- 13.
Indian Standard(IS) code for Safety Net ________
-
IS: 11060:1985
-
IS: 12057: 1990
-
IS: 11057:1984
-
None of the above
Correct Answer
A. IS: 11057:1984 -
- 14.
The mesh size of the safety net shall not exceed.
-
15cm by 15cm
-
16cm by 12cm
-
14cm by 12cm
-
14cm by 14cm
Correct Answer
A. 15cm by 15cmExplanation
The mesh size of the safety net should not exceed 15cm by 15cm. This means that the gaps between the individual mesh openings should not be larger than 15cm by 15cm. This is important because a smaller mesh size ensures that objects or people cannot pass through the net, providing better safety and preventing accidents or falls.Rate this question:
-
- 15.
Visitors / Contractor who is not wearing the required PPE shall be:
-
Counselled
-
Given Verbal Warning
-
Reported to supervisor
-
Escorted off the site immediately
Correct Answer
A. Escorted off the site immediatelyExplanation
Visitors or contractors who are not wearing the required personal protective equipment (PPE) pose a risk to themselves and others on the site. To ensure safety, it is necessary to remove them from the site immediately. This action helps to prevent potential accidents or injuries that could occur due to the lack of proper protective gear. By escorting them off the site, the organization demonstrates its commitment to maintaining a safe working environment for everyone involved.Rate this question:
-
- 16.
Contractor will provide all required PPE _________to all their employee.
-
free of charge
-
As per equipment cost
-
Double to equipment cost
-
Debited equal EMI from salary
Correct Answer
A. free of chargeExplanation
The correct answer is "free of charge" because the contractor is responsible for providing all the necessary personal protective equipment (PPE) to their employees without any cost. This means that the employees do not have to pay for the PPE themselves, and it is the contractor's responsibility to ensure that all employees have the required PPE to ensure their safety while working.Rate this question:
-
- 17.
Deviation from standard must be authorized by:
-
Plant Head
-
FIC Head
-
Corporate Safety Head
-
Plant head in consultation with Corporate Safety Head
Correct Answer
A. Plant head in consultation with Corporate Safety HeadExplanation
The correct answer is "Plant head in consultation with Corporate Safety Head" because when there is a deviation from standard procedures, it is important to involve both the Plant Head and the Corporate Safety Head. This ensures that any changes or exceptions to the standard are authorized by both the person in charge of the plant and the person responsible for overall safety within the organization. By consulting with the Corporate Safety Head, the Plant Head can ensure that the deviation is in line with safety regulations and guidelines.Rate this question:
-
- 18.
Standard shall be reviewed and revised:
-
As per Department's Wish
-
as per PPE BBT chairman decide
-
As necessary and at a minimum, not later than three years from the date of last revision
-
As per lead plant guideline
Correct Answer
A. As necessary and at a minimum, not later than three years from the date of last revisionExplanation
The correct answer is "as necessary and at a minimum, not later than three years from the date of last revision." This means that the standard should be reviewed and revised whenever it is deemed necessary, but it should also be reviewed at least every three years from the date of the last revision. This ensures that the standard remains up to date and relevant.Rate this question:
-
- 19.
All helmets will display stickers that identify the Employee‘s/contractor’s:
-
Company Logo
-
Name
-
Personal blood group.
-
First and Second options are right
Correct Answer
A. First and Second options are rightExplanation
The correct answer is that the first and second options are right. This means that all helmets will display stickers that identify the employee/contractor's company logo and name. This is important for identification and safety purposes in the workplace. The third option, personal blood group, is not mentioned as a requirement for the stickers on helmets.Rate this question:
-
Quiz Review Timeline (Updated): Dec 4, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Dec 04, 2023Quiz Edited by
ProProfs Editorial Team -
Aug 13, 2018Quiz Created by
Sagarak
Back to top