System Of Measurement Quiz: Metric System
-
What is the unit of measure for mass?
-
Pounds
-
Liters
-
Grams
-
Meters
-
This is a system of measurement quiz about the metric system. Units can be described in many forms, and this is why there is a metric system. Have you been having a difficult time trying to understand the metric system? If so, then the quiz below is exactly what you need to help you study for the metric system test See morethat is coming up. Give it a shot and be sure to countercheck with your notes. All the best!
(190).jpg "System Of Measurement Quiz: Metric System - Quiz")
Quiz Preview
- 2.
Convert the following measurement: 1000 cm = _______ m
-
1
-
10
-
100
-
.001
Correct Answer
A. 10Explanation
To convert centimeters to meters, we divide the given value by 100 since there are 100 centimeters in 1 meter. Therefore, 1000 cm divided by 100 equals 10 meters.Rate this question:
-
- 3.
What is the most appropriate measurement of the amount of liquid in Starpoint's pool?
-
ML
-
KL
-
CL
-
Cg
Correct Answer
A. KLExplanation
The most appropriate measurement of the amount of liquid in Starpoint's pool would be kL, which stands for kiloliters. Kiloliters is a unit of measurement commonly used for large volumes of liquid, such as in swimming pools. It is equal to 1,000 liters, making it a suitable choice for measuring the amount of liquid in a pool.Rate this question:
-
- 4.
Which of the following is NOT a base unit in the International System of Units (SI)?
-
Meter (m)
-
Kilogram (kg)
-
Liter (L)
-
Second (s)
Correct Answer
A. Liter (L)Explanation
The International System of Units (SI) includes base units like the meter (m) for length, kilogram (kg) for mass, and second (s) for time. However, the liter (L) is not a base unit; it is a derived unit used to measure volume, where 1 liter equals 1 cubic decimeter (dm³). The base unit for volume in the SI system is the cubic meter (m³).Rate this question:
-
- 5.
How many mL are there in 1 L?
-
1
-
100
-
1000
-
.001
Correct Answer
A. 1000Explanation
There are 1000 milliliters (mL) in 1 liter (L). This is a standard conversion in the metric system, where the prefix "milli-" represents one thousandth and the prefix "kilo-" represents one thousand. Therefore, when converting from liters to milliliters, we multiply the number of liters by 1000.Rate this question:
-
- 6.
Volume can be expressed in what unit of measure?
-
Grams
-
Meters
-
Centimeters
-
Centimeters cubed
Correct Answer
A. Centimeters cubedExplanation
Volume is a measure of the amount of space occupied by an object or substance. It is typically measured in three dimensions: length, width, and height. The unit of measure for volume can vary depending on the object or substance being measured. In this case, the correct answer is centimeters cubed. This unit is used to measure the volume of a three-dimensional object or substance in cubic centimeters, which is equal to the volume of a cube with sides measuring one centimeter each.Rate this question:
-
- 7.
Which of the following is NOT a base unit in the International System of Units (SI)?
-
Meter (length)
-
Kilogram (mass)
-
Second (time)
-
Liter (volume)
Correct Answer
A. Liter (volume)Explanation
The liter is a unit of volume, but it is not a base unit in the SI system. The base unit for volume in the SI system is the cubic meter (m³). The other options are all base units in the SI system: meter for length, kilogram for mass, and second for time.Rate this question:
-
- 8.
What tool is used to find mass?
-
Scale
-
Meter Stick
-
Graduated Cylinder
-
Balance
Correct Answer
A. BalanceExplanation
A balance is used to find mass. It is a tool that measures the gravitational force exerted on an object. By comparing the force exerted on an unknown object with the force exerted on a known object, the mass of the unknown object can be determined. This is done by placing the unknown object on one side of the balance and adding known masses to the other side until the balance is in equilibrium. The mass of the unknown object is then equal to the sum of the known masses.Rate this question:
-
- 9.
To find the volume of an oddly shaped object, what scientific principle is used?
-
Measuring length, times width, times height
-
Finding the mass
-
Using displacement
-
Guessing
Correct Answer
A. Using displacementExplanation
Using displacement is the scientific principle used to find the volume of an oddly shaped object. Displacement involves measuring the amount of fluid (usually water) that is displaced when the object is submerged in it. By measuring the volume of the displaced fluid, the volume of the object can be determined. This method is particularly useful for objects that cannot be easily measured using traditional length, width, and height measurements.Rate this question:
-
- 10.
The metric system is based on what number?
-
10
-
100
-
1
-
247
Correct Answer
A. 10Explanation
The metric system is based on the number 10. This means that the system uses powers of 10 to represent different units of measurement. For example, there are 10 millimeters in a centimeter, 100 centimeters in a meter, and 1,000 meters in a kilometer. This system allows for easy conversion between different units by simply moving the decimal point.Rate this question:
-
- 11.
Why do ice cubes float in a glass of water?
-
The ice weighs less than the water.
-
The ice weighs the same as the water.
-
The ice is less dense than the water.
-
The water is less dense than the ice
Correct Answer
A. The ice is less dense than the water.Explanation
Ice cubes float in a glass of water because they are less dense than the water. Density is defined as the mass of an object divided by its volume. When water freezes and turns into ice, its molecules arrange themselves in a way that creates a lattice structure with empty spaces. This causes the ice to take up more space, or volume, than the same amount of water. Since the mass of the ice remains the same as the water, but its volume increases, the density of the ice becomes less than that of the water. This difference in density causes the ice cubes to float.Rate this question:
-
- 12.
What is NOT a unit of measure for distance?
-
Dkm
-
Cm
-
Mg
-
Mm
Correct Answer
A. MgExplanation
The unit "mg" is not a unit of measure for distance. It is actually a unit of measure for mass. Distance is typically measured in units such as kilometers (km), centimeters (cm), and millimeters (mm).Rate this question:
-
- 13.
In order to calculate the density of an object, a scientist must find:
-
Volume and area
-
Volume and mass
-
Mass and distance
-
Mass and area
Correct Answer
A. Volume and massExplanation
To calculate the density of an object, a scientist needs to know its volume and mass. Density is defined as the mass of an object divided by its volume. By knowing the volume and mass, the scientist can determine how much mass is packed into a given volume, which gives them the density of the object.Rate this question:
-
- 14.
A dip in the water level inside of a graduated cylinder is called a:
-
Air bubble
-
Broken graduated cylinder
-
Meniscus
-
Volume
Correct Answer
A. MeniscusExplanation
A dip in the water level inside of a graduated cylinder is called a meniscus. The meniscus is the curved surface of the liquid caused by the adhesive forces between the liquid and the container. In a graduated cylinder, the meniscus is typically concave, meaning it dips down in the middle. This is because the water molecules are attracted to the glass, causing the water level to curve. It is important to read the measurement at the bottom of the meniscus to get an accurate volume reading.Rate this question:
-
- 15.
Which of the following statements are an observation?
-
Mr. Scully's tests are hard because everyone fails.
-
Starpoint Middle school says the pledge to the flag everyday.
-
The Mona Lisa is the best painting ever created.
-
The Buffalo Bills are the best football team in the NFL.
Correct Answer
A. Starpoint Middle school says the pledge to the flag everyday.Explanation
The statement "Starpoint Middle school says the pledge to the flag everyday" is an observation because it describes a factual occurrence or behavior that can be objectively verified. It does not express an opinion or make a subjective judgment like the other statements.Rate this question:
-
- 16.
When first entering a science room, what should you do with the equipment that is found on your table?
-
Whatever you want.
-
Carefully move the materials in front of you for better work conditions.
-
Do not touch it until you are told to do so.
-
Read the directions and immediately get to work.
Correct Answer
A. Do not touch it until you are told to do so.Explanation
When first entering a science room, it is important to not touch the equipment on your table until you are instructed to do so. This is because the equipment may be fragile, dangerous, or set up in a specific way for a planned experiment. Touching or moving the equipment without proper guidance can lead to accidents, damage, or interference with the planned activities. Therefore, it is best to wait for instructions before interacting with the equipment.Rate this question:
-
- 17.
'Geese fly south for the winter because they do not like the cold.' This statement is an example of:
-
An observation
-
An Inference
-
A scientific Method
-
A hypothesis.
Correct Answer
A. An InferenceExplanation
The given statement "Geese fly south for the winter because they do not like the cold" is an example of an inference. An inference is a conclusion or interpretation that is based on evidence or reasoning. In this case, the statement is not a direct observation but rather a conclusion drawn from the observation that geese fly south during the winter. It is an inference because it assumes that the reason for their migration is their dislike for the cold weather.Rate this question:
-
- 18.
You think that putting the new 'Radial X2000' tires on your Mustang will make it accelerate faster. Your hypothesis for this experiment would look like which of the following statements?
-
I think that putting Radial X2000 tires on my car will make it accelerate faster.
-
If I put Radial X2000 tires on my car it has to go faster than it did.
-
If I put Radial X2000 tires on my car, then it will go faster because they have better traction.
-
If I put new tires on my car then it will go faster than it did before.
Correct Answer
A. If I put Radial X2000 tires on my car, then it will go faster because they have better traction.Explanation
The correct answer is "If I put Radial X2000 tires on my car, then it will go faster because they have better traction." This statement presents a clear cause-and-effect relationship between putting the specific tires on the car and the expected outcome of increased acceleration. It also provides a logical reason for this expectation, stating that the tires have better traction, which is essential for accelerating faster.Rate this question:
-
- 19.
The last step in the Scientific Method says that you need to repeat the process over and over again. Why would you do this?
-
Because as a scientist, you like doing experiments.
-
To test your results and conclude that you will get the same results everytime.
-
You really don't have to do the experiment over again, but its a good idea.
-
To test a new variable.
Correct Answer
A. To test your results and conclude that you will get the same results everytime.Explanation
Scientists repeat the process over and over again to test their results and ensure that they are consistent and reliable. By conducting multiple experiments and obtaining the same results each time, scientists can have more confidence in the accuracy of their findings. This repetition helps to eliminate any potential errors or biases in the initial experiment, and allows scientists to validate their conclusions through consistent replication.Rate this question:
-
- 20.
Identify the qualitative observation.
-
The pizza tastes bad because it was left in the oven too long.
-
The pizza is expensive.
-
This pizza is the best in Niagara county.
-
The pizza has cheese and pepperoni on top.
Correct Answer
A. The pizza has cheese and pepperoni on top.Explanation
The statement "The pizza has cheese and pepperoni on top" is a qualitative observation because it describes the physical characteristics of the pizza. It does not involve any measurements or numerical values, but rather provides a subjective description of the toppings on the pizza.Rate this question:
-
Quiz Review Timeline (Updated): Oct 30, 2024 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Oct 30, 2024Quiz Edited by
ProProfs Editorial Team
Expert Reviewed by
Janaisa Harris -
Oct 07, 2009Quiz Created by
Mrscully
Back to top