Industrial Electrical Engineering Test!

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Sirknight115
S
Sirknight115
Community Contributor
Quizzes Created: 2 | Total Attempts: 27,010
| Attempts: 26,495
SettingsSettings
Please wait...
  • 1/16 Questions

    Resistance has a base unit of:

    • Ohms
    • Amperes
    • Watts
    • Volts
Please wait...
About This Quiz

Industrial electricians install, maintain, test, troubleshoot and repair industrial electrical equipment and associated electrical and electronic controls in factories, plants or mines. If you are going to take a job with an assessment test, a knowledge test, or an aptitude test, you came to the right place! Take this test and get your desired job and launch your career. All See morethe best!

Industrial Electrical Engineering Test! - Quiz

Quiz Preview

  • 2. 

    Current has a base unit of:

    • Ohms

    • Amperes

    • Watts

    • Volts

    Correct Answer
    A. Amperes
    Explanation
    The base unit of current is amperes. Current is the flow of electric charge in a circuit, and it is measured in amperes (A). Ohms is the base unit of resistance, watts is the base unit of power, and volts is the base unit of voltage. However, none of these units represent the base unit of current.

    Rate this question:

  • 3. 

    If a fuse blows when the start button is pressed, what should you check for?

    • Shorted motor circuit

    • Open coils

    • Grounded fuse holder

    • Open neutral

    Correct Answer
    A. Shorted motor circuit
    Explanation
    If a fuse blows when the start button is pressed, it indicates a shorted motor circuit. This means that there is a fault in the motor circuit causing excessive current flow, which leads to the fuse blowing to protect the circuit from further damage. To troubleshoot this issue, one should inspect the motor circuit for any short circuits or faulty connections that may be causing the excessive current flow.

    Rate this question:

  • 4. 

    The base unit of energy is the:

    • Ion

    • Proton

    • Joule

    • Pound

    Correct Answer
    A. Joule
    Explanation
    The correct answer is joule because joule is the base unit of energy in the International System of Units (SI). It is defined as the amount of work done when a force of one newton is applied over a distance of one meter. The other options, ion, proton, and pound, are not units of energy but rather refer to different particles or units of mass.

    Rate this question:

  • 5. 

    Electric energy is converted into heat energy by:

    • Voltage

    • Charge

    • Power

    • Resistance

    Correct Answer
    A. Resistance
    Explanation
    Resistance is the correct answer because it is a property of a material that opposes the flow of electric current. When an electric current passes through a resistor, the resistance causes the electrons to collide with atoms in the material, resulting in the conversion of electric energy into heat energy. This process is known as Joule heating. Therefore, resistance plays a crucial role in converting electric energy into heat energy.

    Rate this question:

  • 6. 

    If the current is 12 amperes and the voltage is 15 volts, what is the resistance?

    • .75 ohms

    • .80 ohms

    • .90 ohms

    • 1.25 ohms

    Correct Answer
    A. 1.25 ohms
    Explanation
    Multiply the current by the electrical resistance to calculate the voltage. For example, if the current is 2.5 amperes and the resistance is 15 ohms, then the voltage = 2.5 amperes x 15 ohms = 37.5 volts.

    Rate this question:

  • 7. 

    Voltage has base units of:

    • Ohms

    • Amperes

    • Watts

    • Volts

    Correct Answer
    A. Volts
    Explanation
    Voltage is a measure of electric potential difference, which is the force that drives electric current. It is measured in volts, making it the correct answer. Ohms measure resistance, amperes measure current, and watts measure power, but none of these are the base units for voltage.

    Rate this question:

  • 8. 

    The abbreviation for the base unit of energy is:

    • D

    • W

    • N

    • J

    Correct Answer
    A. J
    Explanation
    The correct answer is "j" which stands for joule. Joule is the base unit of energy in the International System of Units (SI). It is used to measure various forms of energy such as mechanical, thermal, and electrical energy. The joule is defined as the amount of energy transferred when a force of one newton is applied over a distance of one meter.

    Rate this question:

  • 9. 

    The ability to do work is a definition of:  

    • Charge

    • Energy

    • Neither of the above

    • Both of the above

    Correct Answer
    A. Energy
    Explanation
    Energy is defined as the ability to do work. Work is the transfer of energy from one object to another, or the transformation of energy from one form to another. Therefore, energy is the correct answer as it encompasses the concept of being able to do work. Charge, on the other hand, refers to the property of matter that causes it to experience a force when placed in an electromagnetic field, and is not directly related to the ability to do work.

    Rate this question:

  • 10. 

    The symbol for energy is:

    • D

    • W

    • N

    • J

    Correct Answer
    A. J
    Explanation
    The symbol for energy is represented by the letter "J". This is because "J" is the abbreviation for joule, which is the standard unit of energy in the International System of Units (SI). The joule is named after James Prescott Joule, a British physicist who made significant contributions to the study of energy. Therefore, "J" is the correct symbol to represent energy.

    Rate this question:

  • 11. 

    A joule per second defines a:

    • Volt

    • Ampere

    • Watt

    • Ohm

    Correct Answer
    A. Watt
    Explanation
    A joule per second is the unit of power, which is the rate at which work is done or energy is transferred. Therefore, a joule per second defines a watt, as watt is the unit of power in the International System of Units (SI).

    Rate this question:

  • 12. 

    A coulomb per second defines a:

    • Volt

    • Ampere

    • Watt

    • Ohm

    Correct Answer
    A. Ampere
    Explanation
    A coulomb per second defines an ampere because the ampere is the unit of electric current, and a coulomb per second represents the rate of flow of electric charge. The ampere is defined as one coulomb of charge passing through a given point in one second. Therefore, a coulomb per second is equivalent to an ampere.

    Rate this question:

  • 13. 

    A dual-element fuse is used to:

    • Operate at a higher voltage.

    • Operate at a higher current.

    • Operate with a temporary overload.

    • Protect the transistor.

    Correct Answer
    A. Operate at a higher current.
    Explanation
    A dual-element fuse is used to operate at a higher current. This type of fuse contains two elements, one for normal current and another for higher current. The purpose of the dual-element fuse is to provide protection against temporary overloads that may occur in electrical circuits. When a temporary overload occurs, the dual-element fuse can handle the higher current without blowing, ensuring the circuit remains operational. This helps prevent damage to the circuit and its components.

    Rate this question:

  • 14. 

    When an alternating voltage is applied to a purely resistive circuit, the:

    • Voltage lags the current.

    • Voltage leads the current.

    • Current leads the voltage.

    • Current is in phase with the voltage.

    Correct Answer
    A. Current is in phase with the voltage.
    Explanation
    When an alternating voltage is applied to a purely resistive circuit, the current is in phase with the voltage. This means that both the current and voltage reach their maximum and minimum values at the same time. In a purely resistive circuit, there is no reactance or capacitance to cause a phase shift between the current and voltage. Therefore, they are in phase with each other.

    Rate this question:

  • 15. 

    The charge has base units of:

    • Coulombs

    • Watts

    • Protons

    • Amperes

    Correct Answer
    A. Coulombs
    Explanation
    The charge has base units of coulombs because coulomb is the SI unit of electric charge. It is defined as the amount of charge transported by a constant current of one ampere in one second. Therefore, coulombs is the correct unit to measure electric charge.

    Rate this question:

  • 16. 

    A positive ion is an atom which has:

    • Captured one or more electrons

    • Given up one or more electrons

    • Captured one or more protons

    • Given up one or more protons

    Correct Answer
    A. Given up one or more electrons
    Explanation
    A positive ion is an atom that has given up one or more electrons. When an atom loses one or more electrons, it becomes positively charged because there are more protons than electrons. This creates an imbalance of positive charge, resulting in a positive ion.

    Rate this question:

Quiz Review Timeline (Updated): Nov 16, 2023 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Nov 16, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • May 24, 2010
    Quiz Created by
    Sirknight115

Recent Quizzes

AMOC Block 4 Test AMOC Block 4 Test
2A652 VOL 3 CDC URE 2015 2A652 VOL 3 CDC URE 2015
Vehicle Electrical and Electronic Diagnosis 2 Vehicle Electrical and Electronic Diagnosis 2
2A672 VOL 2 PRE-TEST 2A672 VOL 2 PRE-TEST
2A656 VOL 3 URE (2013) 2A656 VOL 3 URE (2013)
2A672 EDIT CODE 6 40-85 2A672 EDIT CODE 6 40-85
3E0X1 EOC Set 2 Electrical Systems Apprentice 3E0X1 EOC Set 2 Electrical Systems Apprentice
Building Construction (Electrical Systems) Building Construction (Electrical Systems)
Auto 13 - Electrical part II Auto 13 - Electrical part II
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.