9th Grade Science Honors
-
What properties do you use to separate mixtures?
-
Filtration and distillation
-
Distillation and dehydration
-
Filtration and dehydration
-
This is a quiz i needed to make in order to study. You should take it also!
Quiz Preview
- 2.
1Mass = __.Density = __ or __. Volume = __ or __.
-
Mass = mL Density = g or g/cm3 Volume = g/mL or cm3
-
Mass = g Density = g/cm3 or g/mL Volume = cm3 or mL
Correct Answer
A. Mass = g Density = g/cm3 or g/mL Volume = cm3 or mLExplanation
The correct answer is Mass = g, Density = g/cm3 or g/mL, Volume = cm3 or mL. This answer is correct because it provides the correct units for each variable. Mass is typically measured in grams (g), density can be expressed in either grams per cubic centimeter (g/cm3) or grams per milliliter (g/mL), and volume can be measured in either cubic centimeters (cm3) or milliliters (mL).Rate this question:
-
- 3.
Physical properties can be used to....
-
Identify a material, choose a material for no purpose, or to gather the substances in a mixture.
-
Identify a material, to separate the substances in a mixture, and to choose a material for a specific purpose.
Correct Answer
A. Identify a material, to separate the substances in a mixture, and to choose a material for a specific purpose.Explanation
Physical properties such as density, boiling point, solubility, and conductivity can be used to identify a material by comparing its properties to known substances. These properties can also be used to separate the substances in a mixture, for example, by using differences in boiling points or solubilities. Additionally, physical properties can help in choosing a material for a specific purpose by considering properties such as strength, flexibility, and thermal conductivity that are required for a particular application.Rate this question:
-
- 4.
The formula for Mass is
-
M = D x V
-
M = D/V
-
M = V/D
Correct Answer
A. M = D x VExplanation
The formula for mass is given by multiplying density (D) and volume (V). Therefore, the correct answer is m = D x V.Rate this question:
-
- 5.
The properties of a compound are the same as the substances that make it up.
-
True
-
False
Correct Answer
A. FalseExplanation
The statement "The properties of a compound are the same as the substances that make it up" is false. When substances combine to form a compound, their properties often change. Compounds have unique properties that are different from the individual substances that make them up. This is due to the rearrangement of atoms and the formation of new chemical bonds in the compound. Therefore, compounds have distinct characteristics that are not present in their constituent elements or compounds.Rate this question:
-
- 6.
A suspension is _______.
-
A heterogeneous mixture, can filter, and separates into layers.
-
A homogeneous mixture, can filter, and separates into layers.
-
A heterogeneous mixture, cannot filter, separates into layers.
Correct Answer
A. A heterogeneous mixture, can filter, and separates into layers.Explanation
A suspension is a heterogeneous mixture because it consists of solid particles dispersed in a liquid or gas. It can be filtered because the solid particles are large enough to be trapped by a filter. Additionally, a suspension can separate into layers over time due to the different densities of the components, with the solid particles settling at the bottom.Rate this question:
-
- 7.
A colloid is_____.
-
Can filter, cannot scatter light, particles are small
-
Large particles, cannot filter, separates into layers
-
Particles are intermediate in size, scatter light, and cannot filter
Correct Answer
A. Particles are intermediate in size, scatter light, and cannot filterExplanation
A colloid is a type of mixture where the particles are intermediate in size, meaning they are larger than individual molecules but smaller than visible particles. These particles scatter light, which gives the colloid a cloudy appearance. Unlike solutions, colloids cannot be filtered because the particles are too large to pass through a filter. Therefore, the correct answer is that colloid particles are intermediate in size, scatter light, and cannot be filtered.Rate this question:
-
- 8.
A solution is __________.
-
Homogeneous mixture, small particles, cannot separate, can be filtered, can see through it
-
Homogeneous mixture, small particles, cannot separate or be filtered, and is transparent or see through.
-
Heterogeneous mixture, small particles, cannot be separated or filtered, is transparent
Correct Answer
A. Homogeneous mixture, small particles, cannot separate or be filtered, and is transparent or see through.Explanation
A solution is a homogeneous mixture, meaning that it has a uniform composition throughout. It contains small particles that are evenly distributed and cannot be separated or filtered out. Additionally, a solution is transparent or see through, allowing light to pass through it without scattering.Rate this question:
-
- 9.
What Swedish chemist suggested the elements to be represented with symbols in the year 1813?
-
Johann Shvagen
-
Jons Brouel
-
Johann Berpolis
-
Jons Berzelis
Correct Answer
A. Jons BerzelisExplanation
Jons Berzelis, a Swedish chemist, suggested in the year 1813 that elements should be represented with symbols.Rate this question:
-
- 10.
Density can be used to test the ????? of a ????.
-
Volume of a mass
-
Purity of a material
-
Mass of a cubic centimeter
-
Purity of a substance
Correct Answer
A. Purity of a substanceExplanation
Density is a measure of how much mass is contained in a given volume. It is calculated by dividing the mass of an object by its volume. In this context, density can be used to test the purity of a substance. If a substance is pure, it will have a consistent density throughout. However, if impurities are present, the density will vary. Therefore, by measuring the density of a substance, one can determine its purity.Rate this question:
-
- 11.
The formula to calculate density is________.
Correct Answer
D = M/VExplanation
The formula to calculate density is D = M/V, where D represents density, M represents mass, and V represents volume. This formula is derived from the definition of density, which is the amount of mass per unit volume of a substance. By dividing the mass of an object by its volume, we can determine its density.Rate this question:
- 12.
Density is ________.
Correct Answer
the ratio of mass to its volumeExplanation
Density is a physical property of a substance that is defined as the ratio of its mass to its volume. It is a measure of how much mass is contained within a given volume of a material. The formula for density is density = mass/volume. By calculating the density of a substance, we can determine how compact or concentrated it is. For example, a substance with a high density would have a large mass in a small volume, while a substance with a low density would have a small mass in a large volume.Rate this question:
- 13.
How do mixtures differ from pure substances?
Correct Answer
because a mixtures properties are not fixed like a pure substance, because unlike a pure substance a mixtures properties are not fixedExplanation
Mixtures differ from pure substances because their properties are not fixed. Unlike pure substances, which have consistent properties throughout, mixtures can have varying compositions and therefore exhibit different properties depending on the proportions of their components. This lack of fixed properties is a fundamental distinction between mixtures and pure substances.Rate this question:
- 14.
Why are elements and compounds classified as pure substances?
Correct Answer
because the properties of both of them are fixed, because compounds and elements each have fixed propertiesExplanation
Elements and compounds are classified as pure substances because they have fixed properties. Elements are made up of only one type of atom, and compounds are made up of two or more different types of atoms bonded together. The arrangement and composition of atoms in both elements and compounds determine their specific properties, such as melting point, boiling point, and chemical reactivity. These properties remain constant regardless of the amount or source of the substance, making elements and compounds pure substances with fixed characteristics.Rate this question:
- 15.
Define a physical change and give an example.
- 16.
Define viscosity, conductivity, and malleability.
Quiz Review Timeline (Updated): Oct 21, 2024 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Oct 21, 2024Quiz Edited by
ProProfs Editorial Team -
Oct 05, 2008Quiz Created by
Thtchickjenna
Back to top