Network+ Wireless AP Configuration and Channels

Submit

2. True or False: Transmit power adjustment on an AP should always be set to maximum to maximize coverage.

True

False

Submit

4. Which authentication method is recommended for enterprise AP deployments?

Open network

WPA2-PSK

WPA2-Enterprise with 802.1X

WEP encryption

5. What is the primary function of enabling airtime fairness on an AP?

Prevents slow clients from reducing network speed for others

Increases the number of connected devices

Reduces power consumption during idle periods

Enables automatic channel switching

6. True or False: 802.11ac operates exclusively in the 2.4 GHz frequency band.

True

False

Submit

8. Which regulatory domain determines the available channels and power limits for wireless transmission?

ISM band

UNII band

Country code

IEEE standard

9. What does QoS configuration on an AP allow administrators to do?

Prioritize traffic types and manage bandwidth allocation

Increase the transmission power of the AP

Hide the SSID from wireless scanners

Enable automatic channel selection

10. True or False: An AP configured with a 160 MHz channel width on 5 GHz can use all available channels without overlap.

True

False

11. Which 802.11 standard operates in the 5 GHz band and supports data rates up to 54 Mbps?

802.11a

802.11b

802.11g

802.11n

12. Which of the following is a benefit of enabling band steering on an AP?

Reduces the number of connected clients

Automatically moves dual-band clients to less congested bands

Increases transmission power

Disables 2.4 GHz completely

13. In site surveys for AP placement, what is the typical recommended overlap between adjacent AP coverage areas?

10-15%

20-30%

40-50%

60-70%

Submit

15. Which wireless security standard is the most current and secure for AP configuration?

WEP

WPA

WPA2

WPA3

16. What does SSID broadcast control do in AP configuration?

Increases transmission power

Hides the network name from client discovery

Enables WPA3 encryption

Reduces channel interference

17. An AP is experiencing interference on channel 6 in the 2.4 GHz band. Which channel should you switch to for minimal overlap?

Channel 1

Channel 4

Channel 11

Channel 13

18. Which channel width provides the highest data rates in 802.11ac?

20 MHz

40 MHz

80 MHz

160 MHz

19. What is the primary advantage of using 5 GHz band over 2.4 GHz for wireless networks?

Greater signal range and penetration

More non-overlapping channels and less interference

Lower cost and wider device compatibility

Better performance with legacy devices

20. In the 2.4 GHz band, how many non-overlapping channels are available for 802.11b/g networks?

3

5

11

13

Network+ Wireless Access Point Configuration and Channels Quiz

1. The term 'channel bonding' refers to ____.

2.

What first name or nickname would you like us to use?

2. True or False: Transmit power adjustment on an AP should always be set to maximum to maximize coverage.

3. Beamforming on an AP improves wireless performance by ____.

4. Which authentication method is recommended for enterprise AP deployments?

5. What is the primary function of enabling airtime fairness on an AP?

6. True or False: 802.11ac operates exclusively in the 2.4 GHz frequency band.

7. In AP configuration, Dynamic Frequency Selection (DFS) is used to ____.

8. Which regulatory domain determines the available channels and power limits for wireless transmission?

9. What does QoS configuration on an AP allow administrators to do?

10. True or False: An AP configured with a 160 MHz channel width on 5 GHz can use all available channels without overlap.

11. Which 802.11 standard operates in the 5 GHz band and supports data rates up to 54 Mbps?

12. Which of the following is a benefit of enabling band steering on an AP?

13. In site surveys for AP placement, what is the typical recommended overlap between adjacent AP coverage areas?

14. Power Save Mode on an AP is primarily used to ____.

15. Which wireless security standard is the most current and secure for AP configuration?

16. What does SSID broadcast control do in AP configuration?

17. An AP is experiencing interference on channel 6 in the 2.4 GHz band. Which channel should you switch to for minimal overlap?

18. Which channel width provides the highest data rates in 802.11ac?

19. What is the primary advantage of using 5 GHz band over 2.4 GHz for wireless networks?

20. In the 2.4 GHz band, how many non-overlapping channels are available for 802.11b/g networks?