VLAN Trunking and Inter-VLAN Routing Quiz

1. Which command enables a port as a trunk on a Cisco switch?

Switchport mode access

Switchport mode trunk

Switchport trunk allow vlan all

Switchport vlan native 1

2. True or False: A single trunk port can carry traffic from multiple VLANs simultaneously.

True

False

3. Which protocol encapsulates VLAN information in frame headers on trunk links?

VLAN Trunking Protocol (VTP)

802.1Q

Rapid Spanning Tree Protocol (RSTP)

Link Aggregation Control Protocol (LACP)

Submit

5. What happens to untagged frames arriving on a trunk port?

They are dropped

They are assigned to the native VLAN

They are forwarded to all VLANs

They are sent to the router

6. Which of the following statements about SVIs are correct? (Select all that apply)

They enable inter-VLAN routing on Layer 3 switches

Each SVI represents a VLAN interface

They require physical ports

They can be assigned IP addresses

Submit

7. True or False: Trunk ports forward frames with VLAN tags to all connected devices.

True

False

8. What is the maximum number of VLANs supported on an 802.1Q trunk?

256

1024

4096

8192

9. Which device is typically used in a router-on-a-stick topology?

Layer 2 switch

Router with subinterfaces

Access point

Firewall

Submit

11. What is the primary purpose of VLAN trunking?

Carry multiple VLAN traffic over a single link

Increase switch memory capacity

Reduce network latency

Encrypt all network data

12. True or False: Access ports can be members of multiple VLANs simultaneously.

True

False

13. What is the default native VLAN on most Cisco switches?

VLAN 1

VLAN 10

VLAN 100

VLAN 255

14. Which of the following is a valid inter-VLAN routing architecture? (Select all that apply)

Router-on-a-stick

Multilayer switching

Native VLAN routing

Layer 3 switching

Submit

16. What is the name of the virtual interface used for inter-VLAN routing on a switch?

Trunk interface

SVI (Switched Virtual Interface)

EtherChannel

Access port

17. Which method allows communication between devices on different VLANs?

VLAN trunking

Inter-VLAN routing

Port mirroring

Spanning Tree Protocol

Submit

19. What does the native VLAN represent on a trunk port?

The default VLAN for untagged frames

The fastest VLAN on the link

The VLAN used for routing only

The VLAN reserved for management

20. Which protocol is used for VLAN trunking on Cisco switches?

RSTP

802.1Q

LACP

STP

Network+ VLAN Trunking and Inter VLAN Routing Quiz

1. Which command enables a port as a trunk on a Cisco switch?

2.

What first name or nickname would you like us to use?

2. True or False: A single trunk port can carry traffic from multiple VLANs simultaneously.

3. Which protocol encapsulates VLAN information in frame headers on trunk links?

4. In a multilayer switch, inter-VLAN routing occurs at Layer ______.

5. What happens to untagged frames arriving on a trunk port?

6. Which of the following statements about SVIs are correct? (Select all that apply)

7. True or False: Trunk ports forward frames with VLAN tags to all connected devices.

8. What is the maximum number of VLANs supported on an 802.1Q trunk?

9. Which device is typically used in a router-on-a-stick topology?

10. In inter-VLAN routing, each VLAN requires its own ______ address.

11. What is the primary purpose of VLAN trunking?

12. True or False: Access ports can be members of multiple VLANs simultaneously.

13. What is the default native VLAN on most Cisco switches?

14. Which of the following is a valid inter-VLAN routing architecture? (Select all that apply)

15. In a router-on-a-stick configuration, the router connects to the switch via a single ______ port.

16. What is the name of the virtual interface used for inter-VLAN routing on a switch?

17. Which method allows communication between devices on different VLANs?

18. A trunk port configured with 802.1Q adds a ______ header to frames.

19. What does the native VLAN represent on a trunk port?

20. Which protocol is used for VLAN trunking on Cisco switches?