AutoOps+ Virtual Network Subnets Firewall Rules

1. In firewall rule priority, which rule takes precedence in AutoOps+?

The lowest numbered rule

The most recent rule

The rule with the most specific match

The alphabetically first rule

2. In AutoOps+, what does a 'Deny' firewall rule accomplish?

Allows traffic with monitoring

Blocks specified traffic from passing

Logs traffic without action

Redirects traffic to logging server

3. What is the primary advantage of using subnets in AutoOps+ configurations?

Increases total available IP addresses

Reduces network latency

Improves security and network organization

Eliminates the need for firewalls

4. Port 443 is associated with which secure protocol?

SSH

HTTPS

TLS

VPN

5. In AutoOps+ security groups, which direction applies rules to outgoing traffic?

Inbound

Outbound

Bidirectional

Internal

6. What is the maximum number of hosts in a /30 subnet?

2 usable hosts

4 usable hosts

6 usable hosts

8 usable hosts

7. The IPv4 address 192.168.1.255 in a /24 subnet is which type of address?

Network address

Host address

Broadcast address

Gateway address

8. In AutoOps+, what does the default deny firewall policy mean?

All traffic is allowed unless explicitly blocked

All traffic is blocked unless explicitly allowed

Traffic is monitored but not filtered

Outbound traffic is unrestricted

9. Which port number is used for standard HTTP traffic by default?

25

80

443

3306

10. How many subnets can be created from a /22 network block?

4 subnets

8 subnets

16 subnets

32 subnets

11. What does CIDR notation represent in subnet configuration?

Classless Inter-Domain Routing notation for IP address allocation

Central Internet Domain Registry system

Configured Internal Data Routing protocol

Cloud Infrastructure Domain Resource management

12. What is the function of a Network Access Control List (NACL) in AutoOps+?

Encrypts data in transit

Filters traffic at subnet boundary

Manages user authentication

Balances network load

13. The subnet mask 255.255.255.0 is equivalent to which CIDR notation?

/16

/24

/25

/32

14. In AutoOps+, what does a stateful firewall track?

Only inbound connections

Connection state and related return traffic

DNS query responses only

Physical device locations

15. Which protocol is commonly used for secure remote management of AutoOps+ network devices?

HTTP

Telnet

SSH

FTP

16. The IP range 10.0.0.0/8 is classified as which type of address space?

Public address space

Private address space

Multicast address space

Reserved address space

17. In AutoOps+ firewall rules, what does the 'Allow' action do?

Permits specified traffic to pass through

Blocks traffic permanently

Logs traffic without processing

Redirects traffic to alternate route

18. What is the primary purpose of network segmentation in AutoOps+?

To increase bandwidth capacity

To isolate traffic and enhance security

To reduce IP address consumption

To simplify DNS resolution

19. Which firewall rule direction controls inbound traffic in AutoOps+?

Egress

Ingress

Transit