Washington State Driving Regulations Mastery Quiz

When a traffic signal is not working, it is important to treat the intersection as a four-way stop to ensure safety for all drivers.

A reflective orange triangle signifies a slow-moving vehicle, usually traveling at speeds less than 25 mph for safety reasons.

Roundabouts are typically designed for speeds between 15-20 mph to allow for safe entry and exit of vehicles without causing accidents or traffic congestion. Speeds higher or lower than this range can lead to potential safety hazards and inefficiencies in traffic flow.

In reversible lanes, a red X indicates that the lane is closed to traffic. Drivers should not enter or use the lane when a red X is displayed, as it is meant to improve traffic flow and safety.

Reversible lanes with a green arrow indicate that the lane beneath it is open for use and drivers can proceed in that direction.

In reversible lanes, a flashing yellow X indicates that the lane is only meant for turning, and not for through traffic, lane is closed, or as an HOV lane.

In reversible lanes, a steady yellow X indicates a change in the use of the lane and signals drivers to move out of the lane when it is safe to do so. It is important to follow this indication to prevent any potential accidents or traffic issues.

When using a shared center lane, it is important to follow the guidelines to ensure safety for all drivers. The correct distance to travel in a shared center lane is 300 feet, as exceeding this distance can increase the risk of accidents and obstruct traffic flow.

The correct answer is to not stop in travel lanes as it can disrupt the flow of traffic and lead to dangerous situations.

The correct answer is to stay in the right lane except to pass. This helps maintain a smooth flow of traffic and allows faster vehicles to pass on the left.

The RIGHT lane is typically used for slower speeds to allow faster-moving vehicles to pass on the left. It is important to keep right unless passing to ensure smoother traffic flow.

The middle lane is typically used for maintaining higher speeds while the right lane is used for slower speeds and making right turns, and the left lane is typically used for passing slower vehicles.

In many countries, the left lane on a road with multiple lanes traveling in the same direction is designated for passing only in order to maintain a smoother flow of traffic. It is important to follow this rule to ensure safety and efficiency on the road.

The correct legal age to leave children alone in a parked car with the engine running is 16 years old to ensure their safety and well-being.

When parked uphill with a curb, it is important to set your parking brake to prevent the vehicle from rolling backward. Turning your steering wheel away from the curb ensures that if your brakes fail, the vehicle will roll away from the curb instead of into it.

When parked downhill with a curb, it is important to set your parking brake to prevent the vehicle from rolling. Turning your steering wheel toward the curb will also help prevent the vehicle from rolling into traffic or causing damage if the brakes fail. It is crucial to follow these steps to ensure the safety of your vehicle and others.

When parked on a hill without a curb, it is important to set your parking brake and turn your steering wheel toward the edge of the road to prevent your vehicle from rolling into traffic. Setting the parking brake alone or turning the steering wheel away from the edge of the road are not safe practices in this situation.

When parallel parking, it is recommended to park approximately 12 inches away from the curb to leave enough space for other vehicles to pass and to avoid hitting the curb while parking.

The speed limit in school zones is typically set at 20 mph to ensure the safety of children and pedestrians. Driving faster than the designated speed limit can pose serious risks to those in the area.

Speed limits in cities and towns are typically set at 25 mph to ensure pedestrian safety and reduce accidents in highly populated areas.

Speed limits on country roads vary but in most cases, the maximum limit is capped at 50 mph to ensure safety for both drivers and pedestrians.

The correct speed limit on state highways is 60 mph, exceeding this limit would be considered unlawful. Other speed limit options provided are not in alignment with the standard speed limit for state highways.

The correct answer 'failing to see what is happening' indicates that not being aware of your surroundings or the situation is the main cause of collisions.

Safe drivers are advised to look at least 10 seconds ahead to anticipate potential hazards and react in time to prevent accidents.

In a construction area, parking your vehicle can hinder the flow of traffic, hence it is prohibited. Stopping or turning may be necessary in some situations, and speeding is generally not allowed but does not directly relate to blocking traffic in a construction area.

The correct distance you cannot park within of a traffic signal, stop sign, or yield sign is 30 feet. Parking too close to these traffic control devices can obstruct visibility and impede traffic flow, hence the specified distance requirement.

According to traffic regulations, it is not allowed to park within 20 feet of a pedestrian safety zone to ensure the safety of pedestrians accessing and crossing the area.

Parking within 15 feet of a fire hydrant is prohibited to ensure access for firefighters in case of emergencies. Parking at a closer distance may obstruct access to the hydrant and hinder firefighting efforts.

Parking too close to a railroad crossing can obstruct visibility for drivers and potentially block the path of trains. It is important to maintain a safe distance to ensure safety for both motorists and railway traffic.

The correct answer is 12 inches. This distance ensures that the vehicle is safely parked without obstructing traffic or pedestrian access on the road.