Road Safety Quiz 2017

Cycles are not allowed to be driven on the opposite side of the road because they are considered as slow-moving vehicles and can pose a safety hazard to themselves and other road users. Driving on the opposite side of the road increases the risk of accidents and collisions, as it goes against the flow of traffic and disrupts the orderly movement of vehicles. Therefore, it is important for cyclists to adhere to traffic rules and regulations by riding on the correct side of the road.

The average distance travelled by a vehicle moving at a speed of 72 KM per/hr in 1 second can be calculated by converting the speed to meters per second and then multiplying it by the time. Since there are 1000 meters in a kilometer and 3600 seconds in an hour, the speed in meters per second is 20 m/s (72 km/hr * 1000 m/km / 3600 s/hr). Therefore, the average distance travelled in 1 second is 20 meters.

The two seconds rule is a method used to determine if a driver is maintaining a safe driving distance. It suggests that a driver should keep a distance of at least two seconds from the vehicle in front of them. This rule takes into account the time it takes for a driver to perceive a hazard and react to it. By following this rule, drivers can ensure that they have enough time to stop or maneuver safely if the vehicle in front suddenly stops or slows down. The half second rule and the one second rule are not valid methods for maintaining a safe driving distance.

The minimum depth of car tire tread is 1.6 mm. This is the minimum legal requirement for tire tread depth in many countries. Having sufficient tread depth is crucial for maintaining traction and grip on the road, especially in wet or slippery conditions. Tires with inadequate tread depth can increase the risk of hydroplaning and reduce overall braking performance. Regularly checking and maintaining proper tread depth is important for ensuring safe driving.

When driving on an expressway, the middle lane is typically the most appropriate lane to use. This lane allows for a smoother flow of traffic as it is positioned between the slower-moving right lane and the faster-moving left lane. It is also the safest lane to be in as it provides a buffer zone between vehicles entering and exiting the expressway. Additionally, using the middle lane allows for easier lane changes when necessary, as you have the option to move to either the right or left lane if needed.

The correct position for holding the steering wheel is either Ten Pass Ten or Quarter Pass Nine. These positions are recommended because they provide better control and stability while driving. By placing your hands at these positions, you have a firm grip on the wheel and can easily make precise turns. Holding the wheel at 12 o'clock or 6 o'clock positions may lead to less control and can be dangerous in case of sudden movements or impacts. It is important to always have your hands on the steering wheel to ensure quick and effective response while driving.

Using indicators is better than using hand signals because it allows the driver to keep their hands on the steering wheel, which is essential for maintaining control of the vehicle. Hand signals require the driver to take one hand off the steering wheel, which can increase the risk of accidents, especially in situations where quick reactions are necessary. Indicators are also more visible to other drivers, making it easier for them to anticipate the driver's intentions and react accordingly.

When taking a right or left turn, it is important to follow a specific sequence for safety. The correct sequence is to first signal your intention to turn, then adjust your gear accordingly, and finally check your mirrors for any oncoming traffic or pedestrians. This sequence ensures that you communicate your intentions to others on the road, have the appropriate gear engaged for the turn, and are aware of your surroundings before making the turn.

To safely stop a vehicle, it is important to press the brake first and then the clutch. Pressing the brake first allows the vehicle to slow down and come to a stop, while pressing the clutch disengages the engine from the transmission. This prevents the engine from stalling and allows the vehicle to stop smoothly without causing any damage to the engine or transmission. Pressing the clutch before the brake could result in the engine stalling, while pressing both the brake and clutch at the same time may cause the vehicle to jerk or skid.

The minimum depth of motorcycle tyre tread is 1 mm. This is the smallest depth allowed for the tread to ensure proper traction and grip on the road. Tread depth is important for maintaining control and stability while riding a motorcycle, especially in wet or slippery conditions. A tread depth of 1 mm helps to channel water away from the contact patch and prevent hydroplaning. It also provides enough surface area for the tyre to grip the road and maintain traction during acceleration, braking, and cornering.

The TKEI Road Safety requirement mandates several requirements for road safety. These include seat belts for rear passengers to ensure their safety in case of accidents. Following all traffic rules is also necessary to maintain order and prevent accidents. Defensive driver training for all associates is important to enhance their driving skills and promote safe driving practices. Not using a mobile phone while driving is crucial to avoid distractions and focus on the road. Wearing a helmet for pillion riders is essential to protect their head in case of accidents.

In the given scenario, the best course of action would be to concentrate on your driving. This is because stopping immediately and running for assistance may not be safe or practical, as it could potentially cause further accidents or put yourself in danger. Continuing to drive while calling emergency services is a more responsible approach, as it allows you to report the accident and provide necessary information while still focusing on the road. Waiting to see what happens is not advisable, as it can lead to delays in getting help to the accident scene.