Band Saw Safety Trivia Quiz!
-
Before making any adjustments to the bandsaw you must ________.
-
Turn the saw off.
-
Disconnect the power.
-
Clean the table off.
-
None of the above.
-
The Band Saw Safety Trivia Quiz assesses key safety practices for operating a bandsaw. It covers essential precautions like power disconnection, proper guard adjustment, and safe handling techniques to ensure operational safety and prevent accidents.
Quiz Preview
- 2.
Before using the bandsaw you must ______________.
-
Remove jewelry
-
Tie back long hair
-
Put on safety glasses
-
All of the above
Correct Answer
A. All of the aboveExplanation
Before using the bandsaw, it is important to take certain safety precautions. Removing jewelry is necessary to prevent it from getting caught in the machine and causing injury. Tying back long hair is essential to avoid it from getting tangled in the saw blade. Wearing safety glasses is crucial to protect the eyes from any flying debris or sawdust. Therefore, all of the above precautions must be taken before using the bandsaw to ensure a safe working environment.Rate this question:
-
- 3.
When cutting a curve you should do which of the following.
-
Not cut curves, the bandsaw is not the proper tool.
-
One hold the wood with one hand.
-
Plan and cut relief cuts.
-
None of the above.
Correct Answer
A. Plan and cut relief cuts.Explanation
When cutting a curve, it is important to plan and cut relief cuts. Relief cuts are small cuts made along the curve that help to release the tension and prevent the wood from binding or cracking during the cutting process. This technique allows for smoother and more precise cuts when working with curves on a bandsaw. The other options, such as not cutting curves or holding the wood with one hand, are not recommended as they can lead to safety hazards or compromised cutting quality.Rate this question:
-
- 4.
The guard on a bandsaw should be adjusted to _______________.
-
About a 1/4" above the work.
-
About a 1/2" above the work.
-
About a 3/4" above the work.
-
Tight to the top of the wood .
Correct Answer
A. About a 1/4" above the work.Explanation
The guard on a bandsaw should be adjusted to about a 1/4" above the work. This is because having the guard set at this height allows for proper visibility and clearance while cutting. It provides enough space for the blade to move smoothly through the material without causing any unnecessary friction or potential hazards. Adjusting the guard too high or too low can lead to inefficient cutting or even accidents. Therefore, setting the guard at about a 1/4" above the work is the recommended position for safety and optimal performance.Rate this question:
-
- 5.
Your fingers should remain a minimum of ___ away from the blade.
-
1"
-
2"
-
3"
-
4"
Correct Answer
A. 4"Explanation
To ensure safety while using a blade, it is important to keep your fingers a minimum of 4 inches away from the blade. This distance helps to prevent accidental contact with the blade, reducing the risk of cuts or injuries. By maintaining this distance, you can work with the blade effectively while also prioritizing your safety.Rate this question:
-
- 6.
Small scraps should promptly be removed, but not before ________.
-
You are done making all of your cuts
-
You stop the saw
-
You have a plan to get to them
-
None of the above
Correct Answer
A. You stop the sawExplanation
It is important to remove small scraps promptly, but not before stopping the saw. This is because stopping the saw ensures safety and prevents any potential accidents or injuries. Once the saw is stopped, it is then safe to remove the scraps.Rate this question:
-
- 7.
Why is it unsafe to back out of a cut?
-
The blade is going the wrong direction.
-
The doesn't have a reverse function.
-
You could pull the blade off of the wheel.
-
None of the above.
Correct Answer
A. You could pull the blade off of the wheel.Explanation
Backing out of a cut can be unsafe because it could potentially pull the blade off of the wheel. When cutting, the blade is designed to move in a specific direction, and reversing its motion abruptly can cause it to become dislodged from the wheel. This can lead to the blade flying off, posing a significant danger to the operator and those nearby. Therefore, it is important to follow proper cutting procedures and avoid backing out of a cut to ensure safety.Rate this question:
-
- 8.
If you have to back out of a long cut it is safest to ___________.
-
Turn off the saw
-
Just cut through the board
-
Make a relief cut
-
None of the above
Correct Answer
A. Turn off the sawExplanation
To back out of a long cut safely, it is best to turn off the saw. This ensures that the blade is not spinning and reduces the risk of accidental injury. Continuing to cut through the board or making a relief cut without turning off the saw can be dangerous and increase the chances of accidents or damage to the material being cut. Therefore, the safest option is to turn off the saw before backing out of a long cut.Rate this question:
-
- 9.
How many students should use a tool at one time?
-
1
-
2
-
Does not matter.
-
None of the above.
Correct Answer
A. 1Explanation
The correct answer is 1 because the question is asking for the number of students that should use the tool at one time. This implies that only one student should use the tool at a time, suggesting that it is not meant to be used by multiple students simultaneously.Rate this question:
-
- 10.
Before using any equipment you must ___________.
-
Ask instructor for permission to run the tool
-
Wear safety glasses
-
Have cuts pre-planned.
-
All of the above.
Correct Answer
A. All of the above.Explanation
Before using any equipment, it is important to take necessary precautions to ensure safety. This includes asking the instructor for permission to use the tool, wearing safety glasses to protect the eyes from potential hazards, and having cuts pre-planned to avoid any accidents or mistakes. All of these measures contribute to maintaining a safe working environment and preventing any potential injuries.Rate this question:
-
Quiz Review Timeline (Updated): Mar 21, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Jun 01, 2014Quiz Created by
Terry Walker
Back to top