Basic Industrial Safety Quiz For Employees!

1. In which of these locations forklift repairs cannot be done?

Flammable gas area

Combustible dust area

Ignitable fibers area

All of them

Forklift repairs cannot be done in any of these locations, including flammable gas areas, combustible dust areas, and areas with ignitable fibers. These areas pose a high risk of fire or explosion, making it unsafe to perform repairs or use forklifts. It is important to ensure that forklift repairs are conducted in safe and designated areas to prevent accidents and ensure the safety of workers.

Explanation

Forklift repairs cannot be done in any of these locations, including flammable gas areas, combustible dust areas, and areas with ignitable fibers. These areas pose a high risk of fire or explosion, making it unsafe to perform repairs or use forklifts. It is important to ensure that forklift repairs are conducted in safe and designated areas to prevent accidents and ensure the safety of workers.

2. "A Fish in water" represents that this material is _______

Cryogenic hazard

Corrosive hazards

Flammable hazards

Environment Hazard

The phrase "A Fish in water" suggests that the material being referred to is in its natural or preferred environment. In this context, it implies that the material is well-suited or compatible with its surroundings, indicating that it poses no significant hazards or risks. Therefore, the correct answer is Environment Hazard.

Explanation

The phrase "A Fish in water" suggests that the material being referred to is in its natural or preferred environment. In this context, it implies that the material is well-suited or compatible with its surroundings, indicating that it poses no significant hazards or risks. Therefore, the correct answer is Environment Hazard.

3. Which of the following words signals the most severe hazards?

Warning

Danger

Caution

Notice

The word "Danger" signals the most severe hazards because it implies an immediate threat to safety or life. It is often used to indicate a situation that is highly risky and requires immediate attention and caution. Unlike "Warning" or "Caution," which imply a lesser degree of danger, "Danger" suggests a higher level of risk and urgency. "Notice" typically refers to information or instructions that are important but may not necessarily indicate severe hazards.

Explanation

The word "Danger" signals the most severe hazards because it implies an immediate threat to safety or life. It is often used to indicate a situation that is highly risky and requires immediate attention and caution. Unlike "Warning" or "Caution," which imply a lesser degree of danger, "Danger" suggests a higher level of risk and urgency. "Notice" typically refers to information or instructions that are important but may not necessarily indicate severe hazards.

4. Using an office chair to reach a high shelf is safe if the chair does not have wheels or casters.

False

True

Using an office chair to reach a high shelf is not safe even if the chair does not have wheels or casters. This is because office chairs are not designed to be stable platforms for climbing or reaching high places. They lack the necessary support and stability, increasing the risk of falling or injuring oneself. It is always recommended to use a proper step stool or ladder for reaching high shelves to ensure safety.

Explanation

Using an office chair to reach a high shelf is not safe even if the chair does not have wheels or casters. This is because office chairs are not designed to be stable platforms for climbing or reaching high places. They lack the necessary support and stability, increasing the risk of falling or injuring oneself. It is always recommended to use a proper step stool or ladder for reaching high shelves to ensure safety.

5. "Fall of an acid on Hands" is the symbol of _____ materials

Cryogenic material

Flammable

Corrosive

Enviroment

The correct answer is corrosive because when an acid falls on hands, it can cause damage to the skin and tissues due to its corrosive properties. Corrosive materials have the ability to eat away or destroy other substances upon contact, and acids are known for their corrosive nature.

Explanation

The correct answer is corrosive because when an acid falls on hands, it can cause damage to the skin and tissues due to its corrosive properties. Corrosive materials have the ability to eat away or destroy other substances upon contact, and acids are known for their corrosive nature.

6. When lifting heavy loads, you should always

Lift objects with your back, not your legs

Carry a load that blocks your view of the hallway

Maintain the natural S-curve of your spine

Attempt to lift object that are too heavy to hand

When lifting heavy loads, it is important to maintain the natural S-curve of your spine. This means keeping your back straight and avoiding any excessive bending or twisting. By maintaining the natural curve, you distribute the weight evenly along your spine and reduce the risk of strain or injury. Lifting with your back instead of your legs can put excessive strain on your back muscles and lead to injury. Carrying a load that blocks your view of the hallway can increase the risk of accidents. Attempting to lift objects that are too heavy can also result in injury.

Explanation

When lifting heavy loads, it is important to maintain the natural S-curve of your spine. This means keeping your back straight and avoiding any excessive bending or twisting. By maintaining the natural curve, you distribute the weight evenly along your spine and reduce the risk of strain or injury. Lifting with your back instead of your legs can put excessive strain on your back muscles and lead to injury. Carrying a load that blocks your view of the hallway can increase the risk of accidents. Attempting to lift objects that are too heavy can also result in injury.

7. NFPA 704 Diamond was developed for _____________?

All of them

Doctor

Safety Officer

Emergency Responder

The NFPA 704 Diamond was developed to provide a standardized system for identifying and communicating the hazards of hazardous materials. It is used by all of the mentioned groups - doctors, safety officers, and emergency responders - to quickly assess the potential risks associated with a particular substance. The diamond-shaped label consists of four colored sections that represent the level of health, flammability, reactivity, and special hazards of a material. This information is crucial for anyone who may come into contact with hazardous materials, ensuring that appropriate precautions and response measures are taken.

Explanation

The NFPA 704 Diamond was developed to provide a standardized system for identifying and communicating the hazards of hazardous materials. It is used by all of the mentioned groups - doctors, safety officers, and emergency responders - to quickly assess the potential risks associated with a particular substance. The diamond-shaped label consists of four colored sections that represent the level of health, flammability, reactivity, and special hazards of a material. This information is crucial for anyone who may come into contact with hazardous materials, ensuring that appropriate precautions and response measures are taken.

8. A forklift operator is required to undergo refresher training when…

Operator had an accident with MHE

Operator is absent from the work for more than a week

Operator absent from the work for more than 15 days

The correct answer is "Operator had an accident with MHE." This is because when a forklift operator has an accident with a Material Handling Equipment (MHE), it is necessary for them to undergo refresher training. This training helps to reinforce the proper operating procedures and safety protocols to prevent future accidents and ensure the operator is competent and up to date with their skills.

Explanation

The correct answer is "Operator had an accident with MHE." This is because when a forklift operator has an accident with a Material Handling Equipment (MHE), it is necessary for them to undergo refresher training. This training helps to reinforce the proper operating procedures and safety protocols to prevent future accidents and ensure the operator is competent and up to date with their skills.

9. Occasionally leaning back to relax in an office chair is safe practice which alleviates stress and increase productivity

False

True

Leaning back to relax in an office chair is not always a safe practice. While it may temporarily alleviate stress and increase productivity for some individuals, it can also lead to poor posture and back pain if done excessively or without proper support. It is important to maintain proper ergonomics and take regular breaks from sitting to promote overall health and well-being.

Explanation

Leaning back to relax in an office chair is not always a safe practice. While it may temporarily alleviate stress and increase productivity for some individuals, it can also lead to poor posture and back pain if done excessively or without proper support. It is important to maintain proper ergonomics and take regular breaks from sitting to promote overall health and well-being.

10. In ISO 45001, "shall" is a mandatory requirement while "shall" is a recommendation.

False

True

In ISO 45001, "shall" is not a recommendation but a mandatory requirement. This means that the use of "shall" indicates that the requirement must be followed and is not optional. Therefore, the correct answer is false.

Explanation

In ISO 45001, "shall" is not a recommendation but a mandatory requirement. This means that the use of "shall" indicates that the requirement must be followed and is not optional. Therefore, the correct answer is false.