1.
As a best practice, which of the following should be determined prior to provisioning a server? (Select TWO).
Correct Answer(s)
C. Hostname
F. IP Address
2.
A system administrator needs to install an operating system onto a new server in a remote location using PXE. Which of the following methods will BEST accomplish this?
Correct Answer
C. TFTP
3.
When attempting to diagnose service access issues between multiple hosts that coordinate information, which of the following can be used to track dependencies?
Correct Answer
A. Dataflow Diagrams
4.
An organization has agreed on the software that will be used to virtualize the company's web servers. Which of the following should the administrator reference prior to purchasing physical servers to be deployed as hosts in the new virtual architecture?
Correct Answer
C. The vendor's hardware compatibility list
5.
Which of the following is a benefit of utilizing a type 2 hypervisor to manage guests?
Correct Answer
D. There is increased hardware support since there is an OS layer
6.
A system administrator has decided to create several VMs for a company. In which of the following locations would each of the VMs reside?
Correct Answer
A. Host
7.
An ISP is currently drafting and compiling a Service Level Agreement that states there should only be 5.26 minutes of downtime per year, 25.9 seconds per month, and 6.05 seconds per week. Which of the following percentages should be used to meet these metrics?
Correct Answer
C. 99.999%
8.
A technician is tasked with building a test server. Which of the following hard drive types will provide the highest performance?
Correct Answer
B. SAS
9.
A technician is tasked to build a server requiring the fastest possible performance. Which of the following would achieve this requirement?
Correct Answer
C. SSD
10.
A technician is called upon to add storage to a database server. The database administrator needs the maximum performance for accessing many small files. Which of the following specifications should the technician focus on when selecting the drive to add to the server?
Correct Answer
D. Seek time
11.
A hardware compatibility list recommends striping with double parity as storage for an application. In a test environment, a technician realizes that a different RAID level can be used to compensate for a limited number of available disks. Which of the following is the closest RAID level the technician should deploy while minimizing the number of disks and maintaining fault tolerance?
Correct Answer
C. 5
12.
An emergency power off accidentally occurs in a datacenter during a fire alarm test. On recovery, the server administrator notices that an external storage array is performing consistency checks on all the volumes configured in the array. Which of the following components of the storage array has MOST likely failed or faulted?
Correct Answer
C. Battery backed cache
13.
Which of the following is an example of the principle of least privilege and is the MOST secure when granting access to a shared network drive used by the Accounting department?
Correct Answer
A. Grant appropriate permissions to only users in the Accounting department for both the share and NTFS
14.
Which of the following methods should a technician perform to properly clear a hard drive before disposal?
Correct Answer
B. Zero all block sectors
15.
A server unexpectedly shut down as a result of overheating. An alert was sent to the administrator's email address but the administrator was away from the workstation when the alert arrived. Which of the following would have been a more effective method for sending the alert notification?
Correct Answer
B. SMS messages
16.
A server technician in a datacenter configures a daemon to monitor the battery health in a UPS. Over a two day time period, the daemon generates a warning message. Which of the following represents the FIRST action that should be taken by the server technician?
Correct Answer
A. Perform a test on the UPS batteries
17.
A server technician is performing a server installation. This server must be able to resolve host names for users running a variety of client operating systems. At a minimum, which of the following services should be enabled on the new server? (Select TWO).
Correct Answer(s)
B. DNS
D. WINS
18.
A technician has finished installing the operating system on a new server and needs to provide IP addressing information. The server will be connected to the DMZ network. Devices on the network use a default gateway address of 192.168.55.1. Which of the following is a valid IP address for a server in the DMZ network?
Correct Answer
B. IP: 192.168.55.5, NETMASK 255.255.255.128
19.
Clients cannot connect to the network. A technician determines that port 68 is not open. Which of the following protocols is being blocked?
Correct Answer
D. DHCP
20.
Which of the following protocols can be used to perform configuration management on a remote server using the MOST secure methods? (Select TWO).
Correct Answer(s)
C. RDP
D. SSH
21.
A technician receives an error message when trying to boot the server stating the operating system was not found. Change management logs indicate a new hard drive backplane was installed in the server last night.Which of the following should the technician do FIRST when troubleshooting the issue?
Correct Answer
A. Check system board cables
22.
A database server stops responding to requests, and the administrator suspects that the server is experiencing memory faults during heavy network traffic and database access. Which of the following is the FIRST troubleshooting step?
Correct Answer
B. Check the application logs.
23.
A technician is troubleshooting a Linux server and wants to inspect the free disk space on the /dev/sda partition of the system. Which of the following command line tools should the administrator run to view available disk space on the partition?
Correct Answer
D. Df
24.
A system administrator notices that a server is consistently getting slower and less responsive the longer it has been since the last reboot. Once the server is rebooted, the system performs at the expected baseline, but starts slowing down again until the system is unresponsive. Which of the following is the MOST likely cause of this problem?
Correct Answer
B. Service/application memory leak
25.
Users on a network segment report that they are unable to connect to a newly installed file server.The file server IP address settings are as follows: IP address: 10.0.10.254Subnet Mask: 255.255.255.0Default Gateway: 10.10.10.1Which of the following changes should the server administrator make?
Correct Answer
B. Change the IP address on the server to 10.10.10.254.
26.
A technician is troubleshooting an issue with a new server, which is unable to download OS patches from the Internet. The technician reviews the following configuration Ethernet Adapter Local Area Connection:Connection-specific DNS Suffix . : comptia.orgLink-local IPv6 Address . . . . : fe80::c95:3f59:1a01:c050%11IPv4 Address . . . . . . . . . . : 192.168.10.20Subnet Mask . . . . . . . . . . : 255.255.255.128Default Gateway . . . . . . . . : 192.168.10.129Which of the following is the reason that the server is unable to connect to the Internet?
Correct Answer
A. Incorrect default gateway
27.
A new DHCP server is placed on a network segment during off hours. When work resumes, users on a different network segment report connectivity issues. Users on the same network segment report no connectivity issues. Which of the following is the MOST likely reason for the connectivity issues?
Correct Answer
C. The DHCP relay agent was not configured on the adjacent network segment.
28.
A server administrator is notified that all three hard disks in a server array have failed. Which of the following is the MOST likely cause?
Correct Answer
B. Backplane failure
29.
When troubleshooting a failed backup, a technician runs the backup using the same tape but on a different tape drive in the same tape library. The backup fails again. Which of the following should be the FIRST item the technician should examine as a failure?
Correct Answer
C. Tape media
30.
An administrator is securing a secure web server by disabling ports. After completing this process, clients cannot access the secure web server. The administrator should now go back and verify whether which of the following ports is enabled?
Correct Answer
C. 443
31.
A server technician is investigating a potential data breach. It is believed that the breach occurred via telnet access. Which of the following could validate this hypothesis?
Correct Answer
A. Port scanner
32.
Users report that an application is unable to connect to a server on the same network segment.Which of the following is the MOST likely reason?
Correct Answer
D. The application is using a port that is closed on the server.
33.
A technician is replacing a faulty NIC in a server. According to best practices, which of the following should be used to configure the IP address on the server?
Correct Answer
D. Static IP address
34.
A technician needs to add a processor to a server. Which of the following specifications should the technician examine? (Select THREE).
Correct Answer(s)
B. Processor speed
C. Socket type
D. Processor stepping
35.
A server's runtime during power outages is too short to shut down properly. A system technician is asked to remediate the problem. Which of the following would be the result of adding additional batteries to the UPS?
Correct Answer
B. Extended uptime
36.
A system administrator wants to assure that a server is responsive. Which of the following networking tools should the administrator use to verify network connectivity?
Correct Answer
D. PING
37.
Two new applications have been added to a working server. The server response is now very slow. An appropriate plan of action is to:
Correct Answer
D. Uninstall the newly installed applications one at a time.
38.
Which of the following is the core software application that manages computer virtualization?
Correct Answer
A. Hypervisor
39.
Which of the following is a requirement for a server to allow guests to be installed on a hypervisor host?
Correct Answer
C. Processors that support virtualization
40.
Swap space or page file is reserved on the:
Correct Answer
C. Hard disk.
41.
An administrator needs to deploy 1000 servers in a short period of time. Which of the following deployment methods will expedite the OS installations?
Correct Answer
D. Use PXE boot to retrieve an image.
42.
Which of the following are required characteristics of database servers in high transaction environments? (Select THREE).
Correct Answer(s)
B. High bandwidth
C. Higher RPM drives
D. Load balancing
43.
A network administrator is installing additional devices on the network. Currently, the network segment is utilizing all allocated IP addresses. If there are additional addresses available, which of the following would be BEST for the network administrator to perform to accommodate the new network devices?
Correct Answer
D. Increase the size of the DHCP scope for the network segment in question
44.
Which of the following allows virtual machines to share the NIC of the host?
Correct Answer
C. Bridging
45.
An administrator is asked to change a configuration using a GUI on a Windows server, but does not have access to a KVM. Which of the following is BEST to make the change?
Correct Answer
C. RDP
46.
Several of the finance department computers are experiencing timeouts while in their financial program. The program will not open or close; however, the previous day the program was running without issues. Which of the following is MOST likely the cause of this problem?
Correct Answer
B. Rogue processes
47.
A system administrator is troubleshooting a network connectivity issue and runs ipconfig/all on the host. The command returns the following: IPv4 Address: 169.254.0.12Subnet mask: 255.255.0.0 The client is configured for DHCP. Which of the following commands should be run on the client to resolve this issue? (Select TWO).
Correct Answer(s)
A. Ipconfig/release
D. Ipconfig/renew
48.
A technician is assigned a task to configure a new server with six hard drives. The senior administrator requested the technician utilize the drives for maximum fault tolerance. Which of the following RAID configurations should the technician use?
Correct Answer
C. RAID 10
49.
Two RAID arrays are created from eight disks. One is created using RAID 6, the other is created using RAID 5 with a hot spare. Which of the following is the operational difference between these configurations?
Correct Answer
A. RAID 6 has the ability to recover from two disks simultaneously failing.
50.
A datacenter technician encounters a power receptacle labeled NEMA L5-30. Which of the following powers is this socket rated for?
Correct Answer
A. 115v 30 amp