Level 1 - Mechanical Seals Quiz #2
10 Questions
| Total Attempts: 143
Day two quiz
Questions and Answers
- 1.What is a main differences between a 180 and S10 Single Cartridge Seal?
- A.
Stationary versus Rotary Seal
- B.
Multiport versus Single Port Flush
- C.
Cassette versus Cartridge
- D.
Monolithic versus Composite Seal Face
- 2.What is a main difference between the 155 and the 150 Seal?
- A.
Single seal versus a dual seal
- B.
Split seal versus a cassette seal
- C.
Flush Quench and Drain versus Flush only
- D.
Rotary versus Stationary
- 3.Which seal model offers a cassette which can be replaced to repair the seal?
- A.
180
- B.
155
- C.
S10
- D.
150
- 4.Which seal model below is defined as a rotary seal?
- A.
180
- B.
155
- C.
S10
- D.
150
- 5.Which seal model below offers an adjustable gland?
- A.
180
- B.
155
- C.
S10
- D.
150
- 6.Which seal model below uses a composite seal face which is limited to 200 C/ 400 F?
- A.
180
- B.
155
- C.
S10
- D.
150
- 7.Which cartridge/cassette seal in 1.875 inch shaft size offers the lowest price when using CB/SC FKM materials?
- A.
180
- B.
155
- C.
S10
- D.
150
- 8.The 180, 155 and S10 cartridge and cassette seals are available with other metals if necessary for corrosion resistance.
- A.
True
- B.
False
- 9.Is the list price and re-order numbers shown below for a 180WB-20 TC/SC FKM and the Chemraz 505 O-rings for the seal correct? 180 -20 TC/SC 640195 $2304 144 C505 672263 $226 150 C505 673461 $267 151 C505 696207 $286 154 C505 696209 $363
- A.
Yes
- B.
No
- 10.
![If L1 = 2.000 inches, L2 = 3.000 Inches, L3 = 2.250 inches, D1 = 1.500 Inches, D2 =1.875 Inches, D3 = 2.875 inches, D5 = .375 inches, D4 = 4.500 inches will a S10 fit this seal chamber? Note D dimensions are shown as a radius, but are expressed as diameters. - ProProfs]( "If L1 = 2.000 inches, L2 = 3.000 Inches, L3 = 2.250 inches, D1 = 1.500 Inches, D2 =1.875 Inches, D3 = 2.875 inches, D5 = .375 inches, D4 = 4.500 inches will a S10 fit this seal chamber? Note D dimensions are shown as a radius, but are expressed as diameters.")
If L1 = 2.000 inches, L2 = 3.000 Inches, L3 = 2.250 inches, D1 = 1.500 Inches, D2 =1.875 Inches, D3 = 2.875 inches, D5 = .375 inches, D4 = 4.500 inches will a S10 fit this seal chamber? Note D dimensions are shown as a radius, but are expressed as diameters.- A.
Yes
- B.
No
5 Level CDC, Vol 1
Questions: 110 | Attempts: 340 | Last updated: Jan 16, 2013
-
Sample Question1. An Airman is qualified in two Air Force specialty codes (AFSC). Which type of AFSC identifies the one in which the Airman is currently performing duty?
This is part II of the Level 7 Entrance Exam. Part I is an oral interview.
Questions: 17 | Attempts: 42 | Last updated: Dec 20, 2012
-
Sample Question________________ grammar book is on the table?
Supply 7 Level Vol 1
Questions: 44 | Attempts: 35 | Last updated: Dec 26, 2012
-
Sample QuestionEnlisted Air Force specialty qualifications are listed in which Air Force Manual?
Are You Really Best Friends? Take The Quiz & Prove It
Are You Really Best Friends? Take The Quiz & Prove It
What is The Perfect Gift for Your Best Friend Quiz
What is The Perfect Gift for Your Best Friend Quiz
Back to top