Fire Safety Trivia Questions Quiz For Students!

Switching off computers and printers at the end of every workday can prevent overheating of equipment, which can reduce the risk of fire hazards. When electronic devices are left on for extended periods, they generate heat, and this heat can build up and potentially cause a fire. By turning off the devices, they have a chance to cool down, reducing the risk of overheating and fire. Therefore, the statement is true.

The correct answer is "pull the pin, aim at the base of the fire, squeeze the handle, and sweep at the base of the fire." This acronym, P.A.S.S., is commonly used to help people remember the correct steps to operate a fire extinguisher effectively. Pulling the pin allows the extinguisher to be activated, aiming at the base of the fire ensures that the extinguishing agent is directed at the source of the fire, squeezing the handle releases the agent, and sweeping at the base of the fire helps to extinguish it completely.

Calling the local fire department whenever an uncontrolled fire starts within the facility is necessary because they are trained professionals equipped to handle such situations. They have the expertise, equipment, and resources to effectively extinguish the fire and prevent it from spreading or causing further damage. Their prompt response can also help ensure the safety of the people present in the facility and minimize the risk of injuries or fatalities. Therefore, it is crucial to contact the local fire department in case of an uncontrolled fire.

When your clothes catch fire, it is important to stop where you are to prevent the fire from spreading. Dropping to the floor helps to smother the flames, while rolling against the floor further extinguishes the fire. This technique is effective in depriving the fire of oxygen and extinguishing it. After the fire is out, cooling off with water helps to treat any burns and prevent further injury.

Smoke alarms should be placed on or near the ceiling because smoke rises. Placing them at this height ensures that they can detect smoke as early as possible. Smoke alarms should be installed in every bedroom, outside each sleeping area, and on every level of the home, including the basement. By placing them on or near the ceiling, they have a better chance of detecting smoke and alerting occupants in case of a fire.

In the event of an uncontrolled fire in your vicinity, activating the alarm is the first course of action because it alerts others in the building and nearby areas about the fire, allowing them to evacuate and take necessary precautions. This helps to ensure the safety of everyone present and allows the fire department to be notified promptly, increasing the chances of a quick response and effective fire suppression.

Overloading power sockets is not safe, regardless of how long the electrical appliances are used. Overloading can cause overheating, which can lead to electrical fires and damage to the appliances. It is important to distribute the load evenly across multiple sockets and avoid overloading them to ensure safety.

A "backdraft" is a smoke explosion caused by a fire that has consumed the available oxygen within a given space. In all of the mentioned situations - an electrical panel, a storage closet, and the plenum between a suspended ceiling and the floor or roof above - there is a potential for a backdraft to occur. In each case, there is a possibility of high heat, flammable gases, and a smoldering fire remaining, creating the conditions necessary for a backdraft to happen. Therefore, all of the mentioned options have the potential for a backdraft situation.

If there is a fire in your microwave, the best course of action is to turn it off immediately to cut off the power supply and prevent the fire from spreading. Keeping the door closed is important because it helps contain the fire and prevents oxygen from fueling it further. Opening the door can allow oxygen to enter and potentially worsen the fire. Attempting to put out the fire yourself can be dangerous and should be avoided. Using a lid from a pot or pan is not recommended as it may not fully cover the fire and could cause injury.

All of the statements are true. Designated exits must always be unlocked from the inside to ensure people can safely exit during an emergency. It is important to know the fire exit closest to your workspace and have a secondary exit in mind in case the primary exit is blocked or inaccessible. Designated fire exits are typically marked with a green EXIT sign and are lit from within to ensure visibility during emergencies. Therefore, all of the statements mentioned are true.

The minimum number of fire escape routes for a room is two. This is because having only one fire escape route can be dangerous in case of an emergency, as it may become blocked or inaccessible. Having two fire escape routes ensures that there is an alternative path for people to evacuate safely in case one route is compromised.

In many countries, including the United States, 911 is the emergency number to call when a fire is spotted. However, in Singapore, the correct emergency number to call for a fire is 995. This number is specifically designated for reporting fire emergencies and allows individuals to quickly reach the appropriate authorities for assistance.

During a fire alarm, it is crucial to stay calm and help others remain calm as panic can lead to chaos and hinder the evacuation process. Additionally, turning off equipment is important to prevent any potential hazards or fuel sources for the fire. Evacuating quickly is necessary to ensure everyone's safety and to minimize the risk of being trapped or injured in the event of a fire.