Trivia Quiz On Eye Protection At Work!

Safety glasses are to be worn from "Gate to Gate".

Lenses should not just be resistant they need to be shatter proof as well. They must meet the ANSI Z-87.1 standard.

If your in the field, then safety glasses are required.

A full face respirator is acceptable when chipping because it provides complete protection to the face, including the eyes, nose, and mouth, from any hazardous particles or chemicals that may be released during the chipping process. This type of respirator ensures that the wearer's entire respiratory system is shielded, reducing the risk of inhalation of harmful substances. Therefore, using a full face respirator is a safe and appropriate choice for chipping tasks.

To prevent eye damage while using a Torch, it is recommended to use goggles with a 5.0 shade. This shade provides the appropriate level of protection against the intense light emitted by the Torch, ensuring that the eyes are shielded from potential harm. Goggles with lower shades may not offer sufficient protection, while those with higher shades may darken the vision excessively, making it difficult to see properly. Therefore, a 5.0 shade is the ideal choice for preventing eye damage while using a Torch.

Based on the training slides, Cal/Osha receives 90,000 eye injuries per year.

Be sure the faceshield is fully down with no gaps between the faceshield and hard hat.

It is not okay to wear normal prescription glasses with side shields. Side shields are designed to provide additional protection from hazards such as flying debris, dust, and chemicals. However, normal prescription glasses do not offer the same level of protection as safety glasses or goggles. Therefore, even with side shields, normal prescription glasses may not provide adequate protection in certain hazardous environments. It is recommended to use safety glasses or goggles specifically designed for such situations.

The correct answer is faceshield and goggles. When grinding steel, it is important to protect oneself from flying debris, sparks, and potential eye injuries. A faceshield provides full-face protection, shielding the eyes, nose, and mouth from any hazards. Goggles, on the other hand, specifically protect the eyes from any particles or sparks that may be generated during the grinding process. Sunglasses do not provide adequate protection as they are not designed to withstand impact or protect against flying debris. Rubber gloves, although recommended for certain tasks, are not necessary for grinding steel.

Goggles are also required to prevent splashes coming back into your eyes. Glasses are not enough.