Latihan Soal Ujian Un II Tahun 2016

The correct answer is "White orange – orange - white green – blue - white blue - green – white brown - brown". This combination follows the standard international wiring for a straight cable in computer networks. Each pair of wires is in the correct order (white/orange, orange, white/green, blue, white/blue, green, white/brown, brown), which ensures proper connectivity and compatibility with network devices.

The correct answer is "Wireless Fidelity". WiFi stands for Wireless Fidelity, which is a technology that allows wireless connection to the internet or other devices.

The correct answer is "Frekuensi 2,4 Ghz". The IEEE 802.11 wireless protocol operates at a frequency of 2.4 GHz. This frequency band is commonly used for Wi-Fi networks and provides good coverage and penetration through obstacles. It is also less crowded compared to higher frequency bands like 5 GHz, which can result in better performance and less interference.

Linux was initially developed by Linus Torvald.

The given table shows the color positions for one connector to another. In a straight-through cable, the color positions on one connector are the same as the color positions on the other connector. Therefore, the correct answer is "Straight through."

The correct answer is 2.4Ghz. This is the frequency commonly used by WiFi access points. It provides a good balance between range and speed, making it suitable for most home and office environments. Higher frequencies like 5.2Ghz can provide faster speeds but have shorter range, while lower frequencies like 1.9Ghz have longer range but slower speeds. 2Ghz and 3.1Ghz are not commonly used frequencies for WiFi.

A server computer is typically dedicated to storing data. It is a computer that is specifically designed for the purpose of storing and managing data for other computers on a network. Unlike regular computers, server computers are optimized for performance, reliability, and security. They have large storage capacities and are capable of handling multiple requests from client computers simultaneously. Server computers play a crucial role in providing services such as file sharing, email, web hosting, and database management.

A hard disk is a type of storage device that is capable of storing large amounts of data. It is commonly used in computers and other electronic devices to store and retrieve data. Unlike USB, processor, RAM, and ROM, which are not specifically designed for storage purposes, a hard disk is specifically designed to provide large storage capacity. Therefore, the correct answer is hard disk.

The correct answer is Oranye putih – oranye – hijau putih – biru – biru putih – hijau – coklat putih – coklat. This is the correct order for a straight cable (lurus) between connector 1 and connector 2 on a UTP cable.

NIC stands for Network Interface Card, which is also known as an Ethernet card. It is a hardware component that allows a computer to connect to a network and communicate with other devices. The other options mentioned, such as graphic card, sound card, smart card, and identification card, are not synonymous with NIC and serve different functions in a computer system.

The correct answer is 192.168.2.2 because it is in the same IP range as the default IP of the Access Point (192.168.2.1). In order for the PC to communicate with the Access Point and configure it, they need to be on the same network. The first three options (192.168.1.0, 192.168.2.1, and 192.168.1.2) are not in the same network range, so they would not be able to communicate with the Access Point. 192.168.0.50 is also not in the same network range, so it would not be a valid IP address for configuration.

The correct answer is "Storage Device" because it refers to any hardware device that is used to store and retrieve data on a computer. This can include devices such as hard drives, solid-state drives, USB flash drives, CDs, DVDs, and memory cards. These devices provide a means for long-term storage of data and are essential for saving and accessing files on a computer.

The correct answer is "Crimping tool" because it is not a type of network connector. BNC, RJ45, RJ11, and SC are all types of connectors commonly used in networking. A crimping tool, on the other hand, is a tool used to attach connectors to the ends of cables. While it is an essential tool for network installation and maintenance, it is not itself a network connector.

The correct answer is "Internet Protocol". IP stands for Internet Protocol, which is a set of rules that governs the format of data packets sent over the internet. It is responsible for addressing and routing data packets between devices on a network.

The correct answer is Notepad. Notepad is a text editor software and is not used for configuring access points. The other options listed are web browsers, which are not used for configuring access points either.

The terms Rx and Tx in computer network cabling refer to Receiver and Transmitter. These terms are used to indicate the direction of data transmission in a network. The receiver is responsible for receiving data, while the transmitter is responsible for transmitting data. This distinction helps in establishing effective communication between devices in a network.

The correct answer is "Net ID – Host ID". This is because an IP address consists of two parts: the network ID (Net ID) and the host ID. The network ID identifies the network to which the device belongs, while the host ID identifies the specific device within that network.

Tang Crimping is not used to build a wireless network that is connected to the internet. It is a tool used to crimp or secure connectors onto the ends of network cables. The other options listed (Computer Router, Access Point, Modem, Card Wireless LAN) are all devices that are commonly used in building a wireless network that is connected to the internet.

The correct answer is "Text dan grafik" because in a network operating system installation, there are different modes available to choose from. One of these modes is the "Text dan grafik" mode, which allows for both text and graphics to be displayed during the installation process. This mode is commonly used to provide a more user-friendly and visually appealing interface for the installation process.

The question is asking for the standard that is not part of the wireless network. The options provided are 802.11a, 802.11g, 802.11b, 802.11g, and 802.11i. The correct answer is 802.11i because it is the only option that is not a standard for wireless networks.

The correct answer is "Fitur firewall aktif". The padlock on the network connections icon indicates that the firewall feature is active. This means that the network is protected by a firewall, which helps to prevent unauthorized access and potential security threats.

The correct answer is IEEE 802.11b. IEEE 802.11b is a wireless protocol that operates at a frequency of 2.4 GHz and has a transfer speed of 11 Mbps.

The correct answer is Service Set Identifier. SSID stands for Service Set Identifier, which is a unique name that identifies a wireless network. It is used by devices to connect to a specific network, distinguishing it from other networks in the vicinity. The SSID is broadcasted by the wireless router or access point, allowing devices to detect and connect to the network.

DHCP stands for Dynamic Host Configuration Protocol. It is a network protocol that allows an access point to automatically assign IP addresses to clients. This eliminates the need for manual configuration of IP addresses, making it more convenient and efficient for clients to connect to the network. DHCP ensures that each client on the network has a unique IP address and helps manage the allocation and release of IP addresses.

The correct answer is "SMKMuh1" because the SSID (Service Set Identifier) is the name of the wireless network that the client needs to connect to. In this case, the AP (Access Point) has the SSID "SMKMuh1", so the client needs to set their WLAN (Wireless Local Area Network) SSID as "SMKMuh1" in order to access the AP.

A repeater is needed to strengthen the signal in a local network cable. A repeater is a device that amplifies and regenerates the signal, allowing it to travel longer distances without losing strength. It receives the signal, cleans it up, and then retransmits it, ensuring that the signal remains strong and clear throughout the network.

TCP/IP is the correct answer because it is a widely accepted and universally used protocol in networking. It stands for Transmission Control Protocol/Internet Protocol and is the foundation of the internet. TCP/IP allows for reliable and efficient communication between devices on a network, regardless of the platform or operating system. It is used for data transmission, routing, and addressing, making it an essential protocol for connecting devices and enabling internet connectivity.

The correct answer is "ipconfig". Ipconfig is a command used to view the IP configuration settings on a computer. It displays information such as the IP address, subnet mask, and default gateway. By using this command, users can easily check the network settings and troubleshoot any connectivity issues.

The correct answer is "Dapat berupa sering data, sering printer dan sebagainya". This answer suggests that the utilization of a workstation network can involve the sharing of data and printers among multiple computers or devices. It implies that the network can be used to transfer or access data, as well as to connect and use shared printers.

Topologi star adalah topologi jaringan komputer di mana setiap node terhubung ke satu node pusat atau sentral. Node pusat ini berfungsi sebagai konsentrator atau pengatur lalu lintas data antara node-node lainnya. Dalam topologi ini, setiap node tidak terhubung langsung satu sama lain, melainkan melalui node pusat.

DHCP stands for Dynamic Host Configuration Protocol. This protocol is used to automatically assign IP addresses, subnet masks, default gateways, and other network configuration parameters to devices on a network. It allows devices to join a network and obtain the necessary network settings without manual configuration.

The term "Topologi Workstation" is not a valid type of network topology. Network topologies refer to the physical or logical arrangement of devices in a network. The options provided in the question, such as Ring, Bus, Star, and Peer to Peer, are all well-known types of network topologies. However, "Topologi Workstation" does not fit into any recognized category of network topologies.

The "PING" command in a network is used to test the connectivity between two devices by sending an ICMP Echo Request message and receiving an ICMP Echo Reply message. It is used to test the functionality of sending and receiving data packets through a network interface card (NIC), to test the configuration of TCP/IP, and to test network connectivity. However, it is not used to test the compatibility or suitability of a NIC for a particular network.

The correct answer is "Frekuensi 2,4 Ghz dengan kecepatan transfer 54 Mbps". This is because the IEEE 802.11g wireless protocol operates at a frequency of 2.4 GHz and has a maximum transfer rate of 54 Mbps.

WEP stands for Wired Equivalent Privacy. It is a security protocol designed for wireless networks to provide a standard network security system. WEP aims to provide a level of security for wireless networks that is comparable to that of wired networks.

The correct answer is 2 Mbps. The question is asking about the transfer speed used in the wireless IEEE 802.11 protocol. The options provided are different transfer speeds, and the correct answer is the option that matches the actual transfer speed used in the protocol. In this case, the correct answer is 2 Mbps.

The correct answer is "System Ad-hoc". In an ad-hoc network, devices can connect directly with each other without the need for a centralized infrastructure or access point. In this scenario, the laptops are connecting to each other using their own Wi-Fi capabilities as a medium, which aligns with the concept of an ad-hoc system.

The correct answer is "Gagal produk". Gagal produk refers to product failure, which is not a factor that causes damage to wireless network systems. Factors such as software issues, power voltage problems, and natural factors can contribute to network damage, but product failure is not one of them.

The correct answer is "Star". Ethernet cables commonly use a star topology, where each device is connected directly to a central hub or switch. In a star topology, all communication between devices goes through the central hub, which helps in reducing collisions and improving network performance. This topology also allows for easy scalability and troubleshooting, as adding or removing devices does not affect the entire network.

The correct answer is 255.255.255.240.

This is because a /28 subnet mask has a total of 16 IP addresses. The subnet mask 255.255.255.240 allows for 14 usable IP addresses within the subnet.

After assembling a PC, in order for the hardware to function and for the computer to perform its tasks, it is necessary to install an operating system.

The correct answer is System Infrastruktur. When we connect laptops to laptops using an access point as a medium, it is called an infrastructure system. This system allows multiple devices to connect to a central access point and communicate with each other. It is commonly used in wireless networks to provide internet access to multiple devices.

In a UTP cabling system, pins 4, 5, 7, and 8 are not used.

A router is needed to enable communication between two different local network segments. A router is a networking device that forwards data packets between computer networks. It determines the best path for data packets to reach their destination and can connect networks with different protocols or technologies. In this case, since the two local networks are on different segments, a router is necessary to facilitate communication between them.

The correct answer is 54Mb/s. The IEEE 802.11g standard for Access Points supports a maximum data transfer rate of 54Mb/s.

In a peer-to-peer network, each computer functions as both a client and a server, allowing users to have administrative control over their own computers within the network. This type of network does not rely on a central server, making it more decentralized and allowing for easier sharing of resources and files between computers. Therefore, the correct answer is "Peer to Peer".

The maximum data rate that can be provided by an access point is 54 Mbps.

The correct answer is 2, which is the configuration that is done both statically and dynamically. This means that there are two types of IP address configurations available, one where the IP address is manually assigned (static) and another where it is automatically assigned (dynamic).

To connect two switches in a network, a crossover cable is required. A crossover cable is a type of Ethernet cable that is specifically designed to connect similar devices, such as two switches, without the need for a separate network hub or switch. It allows the switches to communicate and exchange data effectively by crossing over the transmit and receive wires. This ensures that the transmit signals from one switch are correctly received by the other switch. Using a straight through cable or other types of cables like UTP, coaxial, or BNC would not be suitable for connecting two switches directly.

The correct answer is 192.168.0.1. This is because the modem's IP address is 192.168.0.1, and in order for the client to access the internet through the AP, the gateway address should be set to the IP address of the modem.