Test Online Un Kimia Bersama

not-available-via-ai

The given compound M exhibits properties such as being easily soluble in water, conducting electricity in the liquid phase, and having high boiling and melting points. These characteristics suggest that the compound M is made up of ions. Ions are formed when atoms gain or lose electrons, resulting in the formation of charged particles. These charged particles are capable of conducting electricity and have high boiling and melting points due to the strong electrostatic forces between them. Therefore, the correct answer is Ion.

The correct answer is Hall-Herault. The Hall-Herault process is a method used for the production of aluminum. It involves the electrolysis of alumina (aluminum oxide) dissolved in molten cryolite (a mineral compound) to extract pure aluminum metal. This process was developed by Charles Martin Hall and Paul Héroult independently in the late 19th century and is still widely used today in the aluminum industry.

The correct answer is II and III. This is because buffer solutions are able to resist changes in pH when small amounts of acid or base are added. In this case, solutions II and III are likely to be buffer solutions as they have the ability to maintain a relatively constant pH value despite the addition of acids or bases.

The corrosion process that occurs the slowest is depicted in picture 4.

The coefficients in a redox reaction equation represent the number of molecules or atoms involved in the reaction. In this case, the correct answer states that the coefficients are 2, 16, and 5. This means that there are 2 molecules of the first reactant, 16 molecules of the second reactant, and 5 molecules of the product in the balanced redox reaction equation.

not-available-via-ai

not-available-via-ai

The line LR in the P-T diagram represents the freezing point of the solvent. This means that at temperatures below LR, the solvent will solidify or freeze. The other lines in the diagram may represent different phases or phase transitions, but LR specifically indicates the freezing point.

The element with atomic number 26 and mass number 56 belongs to group VIIIB and period 4 in the periodic table.

The correct answer is LR. In the given P-T diagram, the freezing line of the solvent is represented by the LR line. This line indicates the temperature and pressure conditions at which the solvent transitions from a liquid state to a solid state. Therefore, LR is the correct answer for the freezing line of the solvent in the diagram.

H2SO4 is the oxidizing agent in the given redox reaction. It can accept electrons from another species and get reduced in the process. This is evident from the fact that sulfur in H2SO4 has a higher oxidation state (+6) compared to its reduced form in H2S (-2). Therefore, H2SO4 can act as an oxidizing agent in a redox reaction.

The correct answer is 0.94 volts. This is the most accurate measurement among the given options.

The correct answer is K and M. This is because both K and M are protein-containing food ingredients that have benzene nuclei and sulfur atoms.

The given electron configuration represents the ion of an element with atomic number 16 and a charge of -2. The electron configuration shows that there are 16 electrons in the atom. The first energy level (n=1) has 2 electrons (1s2), the second energy level (n=2) has 8 electrons (2s2 2p6), and the third energy level (n=3) has 6 electrons (3s2 3p6). This configuration satisfies the octet rule, which states that atoms tend to gain, lose, or share electrons in order to achieve a stable configuration with 8 valence electrons. Therefore, the correct answer is 1s2 2s2 2p6 3s2 3p6.

Laju reaksi yang hanya dipengaruhi oleh konsentrasi terdapat pada tabung nomor 4 terhadap 5. This means that the reaction rate is only affected by the concentration of the substances in the fifth container.

The correct answer is "subtitusi dan adisi" because the first equation involves a substitution reaction, where one functional group is replaced by another, and the second equation involves an addition reaction, where two reactants combine to form a single product.

The explanation for the correct answer (1) is not available.

The correct answer is 3 dan 4. The reaction is endothermic because it requires energy to occur. In option 3, the reaction between compound 3 and compound 4 is endothermic because it absorbs energy from the surroundings. Therefore, option 3 dan 4 is the correct answer.

The example that is a application of adsorption property is the whitening of sugar cane.

The volume of nitrogen monoxide produced in the reaction is directly proportional to the volume of gas ammonia used. Since 6 liters of gas ammonia is used, the same volume of nitrogen monoxide, which is 6 liters, will be produced.

The given question involves the mixing of a 0.2 M solution of CH3COOH (acetic acid) with a 0.2 M solution of NaOH (sodium hydroxide). When these two solutions are mixed, they undergo a neutralization reaction to form water and a salt, sodium acetate (CH3COONa). Since the concentration of both solutions is the same, the resulting solution will be approximately neutral, with a pH close to 7. However, acetic acid is a weak acid, and it does not completely dissociate in water. As a result, some acetic acid molecules will remain undissociated, leading to a slightly acidic pH. Therefore, the correct answer is 6, which represents a slightly acidic pH.

The correct answer is 1. This is because the pressure exerted by a solution is directly proportional to the concentration of the solute particles. In a solution with a smaller number of solute particles, the pressure exerted by the solution will be lower compared to a solution with a higher number of solute particles. Therefore, the container with the smallest number of solute particles will have the lowest vapor pressure.

Jika suhu diturunkan pada volume tetap, menurut prinsip Le Chatelier, sistem kesetimbangan akan bergeser ke arah yang menghasilkan panas. Dalam reaksi ini, reaksi ke kanan menghasilkan panas, sehingga sistem akan bergeser ke kanan untuk mengompensasi penurunan suhu. Ketika sistem bergeser ke kanan, konsentrasi N2 akan bertambah karena reaksi ke kanan melibatkan pembentukan N2.

The concentration of NaOH in the given sample can be calculated using the formula:

Concentration (M) = (Volume of titrant (L) * Concentration of titrant (M)) / Volume of sample (L)

In this case, the volume of titrant is 20 mL, which is equal to 0.02 L. The concentration of the titrant HCl is 0.1 M. The volume of the sample is 250 mL, which is equal to 0.25 L.

Substituting these values into the formula:

Concentration (M) = (0.02 L * 0.1 M) / 0.25 L = 0.008 M

To convert this concentration to a percentage, we can multiply by 100:

Concentration (%) = 0.008 M * 100 = 0.8%

Therefore, the correct answer is 0.8%, which is equivalent to 0.008 M or 62.5%.

The correct answer is 2 and 4. Senyawa eter memiliki kegunaan sebagai obat bius (3) dan pelarut senyawa (4).

The question states that 200 mL of a 0.02 M AgNO3 solution is added to 5 containers, each containing solutions with the same volume and molarity of S2-, PO43-, CrO42-, Br, and SO42- ions. The solubility product constant (Ksp) values for Ag2S, Ag3PO4, Ag2CrO4, AgBr, and Ag2SO4 are given. The Ksp values represent the equilibrium constant for the dissolution of each compound. The compound with the highest Ksp value will have the highest solubility and therefore will dissolve in the solution. Comparing the Ksp values, Ag2CrO4 and Ag2SO4 have the highest values, indicating that they will be the salts that dissolve in the solution.

During the process of electrolysis, the passage of an electric current through a molten salt, such as NaCl, causes the ions in the salt to move towards the electrodes. In this case, the positive sodium ions (Na+) are attracted to the negative electrode (cathode) made of carbon. At the cathode, each sodium ion gains an electron and is reduced to form sodium metal (Na). The amount of metal deposited at the cathode is directly proportional to the amount of charge passed through the electrolyte. Therefore, by using a current of 10 amperes for 30 minutes, a certain mass of sodium metal is obtained as a result.

The correct answer is 1 dan 2. This means that the solutions that exhibit strong and weak electrolytes are options 1 and 2.

The correct answer is 1 dan 3. This is because the question asks for the pair of data that is directly related. Looking at the given options, only option 1 and 3 have a direct relationship. Option 1 includes "polimer" and "monomer" which are both related to the formation process. Option 3 includes "proses pembentukan" which directly relates to the formation process mentioned in option 1. Therefore, option 1 and 3 are the correct pair of data that are related.

not-available-via-ai

The correct answer is "membentuk oksida amfoter." This means that the process mentioned in the question results in the formation of amphoteric oxides.

The given statement explains that in the limestone hill area, water is difficult to foam. This is because there is temporary hardness in the water. Temporary hardness can be removed by heating. Therefore, the correct answer would be the equation that represents the removal of temporary hardness by heating.

not-available-via-ai

The correct answer is 3 and 4. The process of condensation in colloid formation involves the aggregation of smaller particles to form larger particles. In option 3, the addition of AgNO3 to HCl results in the formation of AgCl, which is a colloid. In option 4, the addition of FeCl3 to boiling water leads to the formation of Fe(OH)3, which is also a colloid. Therefore, both options 3 and 4 involve the condensation process in colloid formation.

The answer 39,0 is the correct answer because when both [Q] and [T] are changed to 0,5 M, the reaction rate (V) is increased to 39,0. This suggests that the concentration of both reactants has a significant impact on the reaction rate, and increasing their concentrations leads to a higher reaction rate.

The enthalpy change of a reaction can be calculated by subtracting the sum of the bond energies of the reactants from the sum of the bond energies of the products. In this case, the reactants are C=C and H-Cl, and the products are C-Cl and C-H. The bond energies are given as follows: C=C = 609 kJ/mol, C-Cl = 326 kJ/mol, C-H = 412 kJ/mol, and H-Cl = 426 kJ/mol.

The enthalpy change can be calculated as follows:
Reactants: C=C + H-Cl = 609 kJ/mol + 426 kJ/mol = 1035 kJ/mol
Products: C-Cl + C-H = 326 kJ/mol + 412 kJ/mol = 738 kJ/mol

Enthalpy change = Products - Reactants = 738 kJ/mol - 1035 kJ/mol = -297 kJ/mol

Since the enthalpy change is negative, the correct answer is -312 kJ/mol.

The correct answer is 1 dan 2. The given equations (1) and (2) represent hydrolysis reactions where water molecules split into H+ and OH- ions. In equation (1), CH3COO- reacts with water to form CH3COOH (acetic acid) and OH-. In equation (2), CN- reacts with water to form HCN (hydrocyanic acid) and OH-. Both equations show the formation of an acid (CH3COOH and HCN) and OH- ions, indicating that the salts in these reactions are acidic. Therefore, the correct answer is 1 dan 2.

The correct answer is 4 dan 5. In the given table, unsure 4 is "Batu bara" and its usefulness is "sebagai bahan bakar". Similarly, unsure 5 is "Minyak bumi" and its usefulness is "sebagai bahan bakar". Both unsure 4 and 5 are related to being a fuel source, making option 4 dan 5 the correct pair.

The negative sign in the answer indicates that the formation of 1 mole of gas SO3 is an exothermic process, meaning it releases energy. The value of -395 kJ represents the amount of heat released during the formation of 1 mole of gas SO3.