# Tehnička Kultura 6.A ( Grupa A )

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
| By Sestia
S
Sestia
Community Contributor
Quizzes Created: 1 | Total Attempts: 2,434
Pitanja: 12 | Attempts: 2,454

Settings

Tehničko crtanje

• 1.

### Što prikazuje MJERILO CRTANJA?

• A.

Odnos dimenzija prikazanih predmetom i njegove umjetne veličine.

• B.

Odnos dimenzija predmeta nacrtanog na crtežu i njegove prirodne veličine.

• C.

Odnos dimenzija građevine u tehničkim crtežima .

B. Odnos dimenzija predmeta nacrtanog na crtežu i njegove prirodne veličine.
Explanation
The correct answer is "Odnos dimenzija predmeta nacrtanog na crtežu i njegove prirodne veličine." This answer indicates that the scale of the drawing accurately represents the dimensions of the object being depicted in relation to its actual size.

Rate this question:

• 2.

### Koja mjerila pokazuju uvećanje?

• A.

M 1:2

• B.

M 1:1

• C.

M 2:1

• D.

M 5:1

• E.

M 1:5

C. M 2:1
D. M 5:1
Explanation
The given answer, M 2:1 and M 5:1, indicates an increase in ratio. In both cases, the first number represents the original measurement, while the second number represents the increased measurement. For example, M 2:1 means that the measurement has doubled, while M 5:1 means that the measurement has increased by a factor of five. Therefore, these ratios demonstrate an enlargement or growth in the measurements.

Rate this question:

• 3.

### U graditeljstvu na kote unose se mjerne jedinice u milimetrima.

• A.

Točno

• B.

Netočno

B. Netočno
Explanation
The given statement is incorrect. In construction, measurements are typically entered in millimeters, not in any other unit.

Rate this question:

• 4.

### _______ je stručno izrađen plan koji sadrži sve crteže i proračune za gradnju građevnog objekta. Izrađuju ga stručnjaci u projektnim uredima, a mora biti usklađen s urbanstičkim provedbenim planom naselja.

PROJEKT
projekt
Projekt
Explanation
The correct answer is "PROJEKT, projekt, Projekt" because it refers to a professionally developed plan that includes all the drawings and calculations for the construction of a building. It is created by experts in project offices and must be in line with the urban implementation plan of the settlement.

Rate this question:

• 5.

### Kako se zove tablica koja se crta u desnom donjem kutu?

• A.

Podloga

• B.

Legenda

• C.

Sastavnica

• D.

Tumač znakova

• E.

Opisna tablica

• F.

Opisna šperploča

• G.

C. Sastavnica
• 6.

### Crtež koji prikazuje dimenzije svakog dijela ili pozicije naziva se:

• A.

Skica

• B.

Montažni crtež

• C.

• D.

• E.

Izvedbeni crtež

Explanation
A radionički crtež is a drawing that shows the dimensions of each part or position. It is commonly used in workshops or manufacturing settings to guide the construction or assembly of a product. Unlike a sketch or an izvedbeni crtež (execution drawing), a radionički crtež provides detailed and precise information about the dimensions and specifications of the parts, allowing for accurate production or assembly. A montažni crtež (assembly drawing) may show the overall arrangement of parts, but it may not provide specific dimensions for each individual part. Therefore, the correct answer in this case is radionički crtež.

Rate this question:

• 7.

### Tehničke tvorevine velikih dimenzija prikazuju se tehničkim crtežom u prirodnoj veličini.

• A.

DA

• B.

NE

B. NE
Explanation
The given statement states that large-sized technical creations are displayed using a technical drawing in their actual size. The correct answer "NE" means "No" in Croatian, suggesting that the statement is false. Therefore, the correct explanation could be that technical drawings do not show large-sized technical creations in their actual size.

Rate this question:

• 8.

### Za izradu tehničkih crteža vrlo malih predmeta primjenjuje se mjerilo za uvečavanje.

• A.

DA

• B.

NE

A. DA
Explanation
The statement states that for the production of technical drawings of very small objects, a magnification scale is used. The answer "DA" (which means "yes" in Croatian) indicates that the statement is correct.

Rate this question:

• 9.

### Sastavljanje dijelova u cjelinu vrši se po:

• A.

Izvedbenom planu

• B.

Idejnom crtežu

• C.

• D.

Montažnom planu

• E.

Montažnom crtežu

• F.

E. Montažnom crtežu
Explanation
The correct answer is "montažnom crtežu" which translates to "assembly drawing" in English. This suggests that the process of assembling parts into a whole is done according to the assembly drawing.

Rate this question:

• 10.

### ______________________ prikazuje kakav je odnos dimenzija predmeta nacrtanog na crtežu i njegove prirodne veličine.

MJERILO CRTANJA
mjerilo crtanja
Mjerilo crtanja
Mjerilo Crtanja
mjerilo Crtanja
Explanation
The correct answer is "MJERILO CRTANJA, mjerilo crtanja, Mjerilo crtanja, Mjerilo Crtanja, mjerilo Crtanja." This is because the question is asking for the term that represents the relationship between the dimensions of an object drawn on a drawing and its actual size. The term "mjerilo crtanja" in Croatian refers to the concept of scale in drawing, which is used to accurately represent the size of objects in a drawing.

Rate this question:

• 11.

• A.

DA

• B.

NE