Samsung Printer Knowledge Evaluation
The units being covered in this quiz are as follows: CLP315, CLX3175FN, CLX6200, ML4050, SCX-4828 and the SCX-5635FN. All documentation needed to answer the questions is located on the BGSN Transfer site. Please refer to it for needed product spec sheets and service manuals.
Questions and Answers
- 1.
The Samsung equivalent to a Low-Voltage Power Supply in a standard laser printer is called a:
- A.
SMPS
- B.
LVPS
- C.
HVPS
- D.
DC Controller
Correct Answer
A. SMPSExplanation
The correct answer is SMPS. SMPS stands for Switched Mode Power Supply, which is the Samsung equivalent to a Low-Voltage Power Supply in a standard laser printer. SMPS is a type of power supply that efficiently converts and regulates electrical power from the mains AC (alternating current) to the required DC (direct current) voltage for the printer's components to operate. It is commonly used in electronic devices to provide stable and reliable power.Rate this question:
-
- 2.
The fuser is provided power by the:
- A.
HVPS
- B.
Formatter
- C.
Main Drive
- D.
SMPS
Correct Answer
D. SMPSExplanation
The correct answer is SMPS. SMPS stands for Switched Mode Power Supply, which is responsible for converting the incoming AC voltage into DC voltage and providing power to various components of the printer, including the fuser. The SMPS ensures that the power supplied to the fuser is stable and regulated, allowing it to heat up and fuse the toner onto the paper effectively.Rate this question:
-
- 3.
The SMPS (Switching Mode Power Supply) sends ______ volts to the fuser and ________ volts to the imaging components.
- A.
24V; 5V
- B.
5V; 24V
- C.
5V for all
- D.
24V for all
- E.
None of the above
Correct Answer
A. 24V; 5VExplanation
The SMPS (Switching Mode Power Supply) sends 24 volts to the fuser and 5 volts to the imaging components.Rate this question:
-
- 4.
The only noticeable difference between t he CLP315 and the CLX3175Fn is the CLP315 does not have a:
- A.
Manual Feed Tray
- B.
LCD Screen
- C.
Wireless LAN Module
- D.
Automatic Document Feeder
Correct Answer
D. Automatic Document FeederExplanation
The correct answer is Automatic Document Feeder. The explanation for this is that the CLP315 and the CLX3175Fn have several similarities, such as having a manual feed tray, an LCD screen, and a wireless LAN module. However, the only noticeable difference between the two is that the CLP315 does not have an automatic document feeder.Rate this question:
-
- 5.
The Imaging Laser Scanner for these units is called a:
- A.
Printhead
- B.
LSU
- C.
Laser Scanning Assembly
- D.
Flatbed Scanner
Correct Answer
B. LSUExplanation
The correct answer is LSU. LSU stands for Laser Scanning Unit, which is a type of imaging laser scanner used in various units. It is responsible for scanning documents or images and converting them into digital format. The LSU technology is commonly used in laser printers, multifunction printers, and some types of scanners.Rate this question:
-
- 6.
A paper jam in the tray pickup area will return a paper jam:
- A.
4
- B.
3
- C.
2
- D.
1
- E.
0
Correct Answer
E. 0Explanation
If there is a paper jam in the tray pickup area, it means that the paper cannot be picked up by the printer properly. This will result in the printer being unable to print anything, hence returning a paper jam error. Therefore, the correct answer is 0, indicating that a paper jam in the tray pickup area will return a paper jam error.Rate this question:
-
- 7.
The difference between an ADF and DADF is that the DADF allows for the ______ of prints and copies.
- A.
Stapling
- B.
Collating
- C.
Duplexing
- D.
Sorting/Stacking
Correct Answer
C. DuplexingExplanation
The correct answer is "Duplexing". The explanation for this is that duplexing refers to the ability to print or copy on both sides of a sheet of paper automatically. ADF (Automatic Document Feeder) and DADF (Duplexing Automatic Document Feeder) are both types of document feeders commonly found in printers and copiers. While ADF allows for automatic feeding of documents, DADF specifically allows for duplexing, meaning it can automatically scan or copy double-sided documents. Therefore, the main difference between ADF and DADF is the duplexing capability provided by DADF.Rate this question:
-
- 8.
The CLP315 has a total of_______ drive motor assembly(s).
- A.
3
- B.
2
- C.
1
- D.
None
Correct Answer
C. 1Explanation
The CLP315 printer has only one drive motor assembly.Rate this question:
-
- 9.
On all but one of the units being serviced, the fuser exit sensor is located on the fuser assembly.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement states that the fuser exit sensor is located on all but one of the units being serviced. However, it does not specify where the sensor is located on the remaining unit. Therefore, it cannot be concluded that the statement is true.Rate this question:
-
- 10.
On all units being covered, the charge roller is contained within the unit, not the toner assembly.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The charge roller is not contained within the unit, but rather in the toner assembly.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
Aug 27, 2010Quiz Created by
BarristerUser1
- Calculus Quizzes
- Data Handling Quizzes
- Decimal Quizzes
- Discrete Mathematics Quizzes
- Equation Quizzes
- Fraction Quizzes
- Function Quizzes
- Geometry Quizzes
- Graph Quizzes
- Measurement Quizzes
- Multiplication Quizzes
- Number Quizzes
- Percentage Quizzes
- Place Value Quizzes
- Probability Quizzes
- Problem Solving Quizzes
- Ratio Quizzes
- Shape Quizzes
- Statistics Quizzes
- Trigonometry Quizzes
Back to top