Test Your Dent Repair Skills
Questions and Answers
- 1.
The best way to repair a dent is to start at the point of impact and work outwards.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
You should start with the indirect damage and work towards the point of impact.Rate this question:
-
- 2.
One of the disadvantages of the new Magna-Spot Stud Welder gun is that it's not recommended to use of lightweight high strength steels. HELP
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The JO-1050 stud welder kits incorporates Motor Guards exclusive Low Heat technology is designed for light weight high strength steels.Rate this question:
-
- 3.
What are one of the advantages on the new Magna-Spot Stud Welder gun? HELP
- A.
Nothing is really different....
- B.
Holds the stud pins in the tip without falling out.
- C.
Requires less pulling due to new stud pins that come in bigger sizes.
Correct Answer
B. Holds the stud pins in the tip without falling out.Explanation
The new gun holds the pins in the gun without falling out. You can also attache several pins to the gun, which will eliminate the need to get one at a time form the container.Rate this question:
-
- 4.
First in last out is a rule that should be followed when repair damage.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
You should alway start with the damage that was last in(indirect damage) and work towards the first in (direct damage.)Rate this question:
-
- 5.
When pulling on a dent, you should also use a body hammer to tap down on the highs to level the highs and to relax the metal.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Just pulling alone may force and stretch the metal.Rate this question:
-
- 6.
Steel has a memory, it's our job to help it return to it's relaxed state.
- A.
True
- B.
False
Correct Answer
A. True -
- 7.
Motor Guard is the only company that makes a stud welder gun that is made in the USA. HELP
- A.
True
- B.
False
Correct Answer
A. True -
- 8.
Over working the steel may result in:
- A.
New steels are thin, which reduces work hardening. Therefore, metal finishing can usually be achieved.
- B.
The metal to shrink.
- C.
Work hardened steel that becomes too brittle and may crack.
Correct Answer
C. Work hardened steel that becomes too brittle and may crack. -
- 9.
Stretched metal may be shrunk using a cold method and/or a heat method using a stud welding gun. HELP
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
There is an attachment for metal shrinking.Rate this question:
-
- 10.
Boron steel is generally not recommended to be repaired.
- A.
True
- B.
False
Correct Answer
A. True -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jan 22, 2013Quiz Edited by
ProProfs Editorial Team -
Feb 12, 2011Quiz Created by
Back to top