Tattoo Machine Test
This is a test from the video and the information packets
- 1.
Thee stroke length of a machine is determined by what?
- A.
The distance of travel of the armature bar from its highest point to its lowest while the machine is running.
- B.
The speed of the flux capacitor travels
- C.
That depends on the size of the coils
Correct Answer
A. The distance of travel of the armature bar from its highest point to its lowest while the machine is running. -
- 2.
A tattoo machine has three systems that must work together for the Machine to function properly, what are they?Here are 2 what is the 3rd? Mechanical, Electrical
Correct Answer
Magnetic
magnet - 3.
The objective of any proper machine set-up is to achieve Synchronization of the machine's three systems while controlling the what?
- A.
Speed and force (function) of the machine.
- B.
How fast you can get the ink to go into the skin
- C.
The spark a machine makes
Correct Answer
A. Speed and force (function) of the machine. -
- 4.
Tension on the machine is achieved by what part?
- A.
The Rear spring
- B.
The Coils
- C.
The Capacitor
Correct Answer
A. The Rear spring -
- 5.
What do capacitors do for a tattoo machine?
- A.
They are like a muffler to make the machine sound less loud
- B.
They cut down on arching and point wear
- C.
The make the machine look cooler and more complicated to customer, they actually have no purpose on the machine at all.
Correct Answer
B. They cut down on arching and point wear -
- 6.
With a properly running tattoo machine, the armature bar will come into contact with what coil the front or rear one?
- A.
The rear coil
- B.
The front coil
- C.
Both coils at the same time
Correct Answer
B. The front coil -
- 7.
What part of the tattoo power unit hooks up to the machine?
- A.
The clip cord
- B.
The foot switch
- C.
The capacitor
Correct Answer
A. The clip cord -
- 8.
What is the name of the part that connects to the front binding post, which adjusts the way the machine runs?
- A.
Coils
- B.
Rear spring saddle
- C.
contact screw
Correct Answer
C. contact screw -
- 9.
If your armature bar is not making flush contact with your front coils, what can be added to the front coil to fix this?
- A.
Nothing your screwed
- B.
Shim or washer
- C.
Super glue
Correct Answer
B. Shim or washer -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jan 02, 2013Quiz Edited by
ProProfs Editorial Team -
Jun 08, 2009Quiz Created by
Jerrymartin
Back to top