Quiz: Air Force 7 Level Upgrade CDC EOC Test
Looking for an interesting Air Force test? This quiz can be of your assistance. Ever wondered how much do you know about the MTF course? What is AETC training? What are the different elements of the LCOM study? Check out the online quiz to see how much you know and learn more.
- 1.
Training detachments are administratively assigned to which MAJCOM?
- A.
ACC
- B.
ATC
- C.
AFRC
- D.
AETC
- E.
AFMC
Correct Answer
D. AETC -
- 2.
AETC training detachments normally do not provide what type of training?
- A.
Cross utilization training
- B.
Continuation training
- C.
Ancillary training
- D.
Formal training
Correct Answer
C. Ancillary training -
- 3.
The block training method is normally used to teach which MTF course?
- A.
Any 7 Level Course
- B.
Weight and Balance
- C.
Maintenance Operation
- D.
General TO system
Correct Answer
C. Maintenance Operation -
- 4.
Each A&P course must be completed within how many months?
- A.
11
- B.
12
- C.
13
- D.
14
Correct Answer
C. 13 -
- 5.
Which of the following is used as the cover folder for an individual's training records?
- A.
Specialty Training Standard
- B.
Career Field Education and Training Plan
- C.
AF Form 623, Individual Training Plan
- D.
AF IMT 623a, On the Job Training Record Continuation Sheet
Correct Answer
C. AF Form 623, Individual Training Plan -
- 6.
All of the following can designate critical tasks that apply to a specific AFSC in a particular work center except
- A.
MAJCOMs
- B.
Supervisors
- C.
Commanders
- D.
UTMs
Correct Answer
D. UTMs -
- 7.
Who must approve a waiver before an individual can be added to the SCR for a task normally performed by a person of a higher grade?
- A.
Sq Operation Officer
- B.
MAJCOM functional manager
- C.
SQ/CC
- D.
MXG/CC
Correct Answer
D. MXG/CC -
- 8.
In order to be given authority to downgrade a red x an individual must be approved by the MXG/CC and hold the minimum grade of
- A.
CMSgt
- B.
SMSgt
- C.
MSgt
- D.
TSgt
Correct Answer
C. MSgt -
- 9.
What training phase has the these four sub phases; multiphase, MAJCOM mandatory, freeflow, and maintenance qualification training?
- A.
I
- B.
II
- C.
III
- D.
IV
Correct Answer
B. II -
- 10.
What continuation training consists of academic and practical hands on courses that complement initial skills training received through AETC mission ready airman and training detachment courses?
- A.
Maintenance Qualification
- B.
Maintenance Refresher
- C.
On-the-Job
- D.
Ancilliary
Correct Answer
A. Maintenance Qualification -
- 11.
How often does the MTF provide a status of training briefing to the MXG/CC?
- A.
Monthly
- B.
Quarterly
- C.
Semiannually
- D.
Annually
Correct Answer
A. Monthly -
- 12.
An individual comes due for training re certification while TDY, on leave, or incapacitated. Provided it has not been more than 60 days since the original due date, how many days are allowed after returning before de certification is required?
- A.
15
- B.
30
- C.
45
- D.
60
Correct Answer
B. 30 -
- 13.
Who is responsible for conducting an interview with both the trainee and the supervisor before a trainee starts a CDC course?
- A.
Operation officer
- B.
Group Commander
- C.
UTM
- D.
MTF/CC or chief
Correct Answer
C. UTM -
- 14.
Once you have completed the master task list for your master training plan, your next step is to
- A.
Evaluate training
- B.
Select training strategies
- C.
Determine training needs
- D.
Determine training capabilities
Correct Answer
C. Determine training needs -
- 15.
In order to account for unfunded requirements and valid non-maintenance tasks, the logistics composite model allows what percentage of overhead manning?
- A.
5
- B.
10
- C.
15
- D.
20
Correct Answer
B. 10 -
- 16.
Which element of a LCOM study considers weather modeling conditions?
- A.
Support facilities
- B.
Support equipment
- C.
Operations requirements
- D.
Maintenance requirements
Correct Answer
C. Operations requirements -
- 17.
Which factor is not modeled in a LCOM manpower study?
- A.
Spare parts
- B.
Maintenance people
- C.
Training deployments
- D.
Aerospace ground equipment
Correct Answer
C. Training deployments -
- 18.
Manpower authorizations are
- A.
Funded
- B.
Unfunded
- C.
Unvalidated
- D.
Both funded and unfunded
Correct Answer
A. Funded -
- 19.
A unit manpower document does not
- A.
Show the AFSC required for a particular position
- B.
Provide detailed information about each manpower requirement
- C.
Show the name of person assigned to a particular position
- D.
Show the required grade for a particular position
Correct Answer
C. Show the name of person assigned to a particular position -
- 20.
A meeting to discuss manning issues in the MXG is normally held
- A.
Weekly
- B.
Monthly
- C.
Quarterly
- D.
Semiannually
Correct Answer
B. Monthly -
- 21.
Which MXG office acts as the office of primary responsibility for maintenance analysis referrals?
- A.
PS&D
- B.
MDSA
- C.
MOC
- D.
Programs and Resources Flight
Correct Answer
B. MDSA -
- 22.
Which agency is normally responsible for monotoring the overall maintenance supply interface and resolving supply support problems?
- A.
Maintanence Supply Liason
- B.
Maintenace Supply Support
- C.
MOC
- D.
MDSA
Correct Answer
A. Maintanence Supply Liason -
- 23.
Which of the folowing is not normally a Maintenace Supply Liason duty?
- A.
Monitoring status of back ordered requisitions
- B.
Advising supervisors on supply management documents
- C.
Soliciting and consolidating inputs to indicate a quick reference list
- D.
Collecting and turning in expendable. excess, and surplus precious metal bearing assets
Correct Answer
D. Collecting and turning in expendable. excess, and surplus precious metal bearing assets -
- 24.
The assets in high priority mission support kits (HPMSK) should be transferred into the host base's Standard Base Supply System account after how many days?
- A.
15
- B.
30
- C.
45
- D.
60
Correct Answer
B. 30 -
- 25.
How often are operating commands required to review permanent readiness spares packages (RSPs)?
- A.
Monthly
- B.
Quarterly
- C.
Annually
- D.
Biennially
Correct Answer
C. Annually -
- 26.
Which expendability, recoverability,and reparability codes (ERRC) must be assigned to an asset before it can be placed on a bench stock?
- A.
XF3
- B.
XD2
- C.
XD1
- D.
XB3
Correct Answer
D. XB3 -
- 27.
Shop stock should not exceed how many days of usage?
- A.
30
- B.
60
- C.
90
- D.
120
Correct Answer
C. 90 -
- 28.
Provided it is still serviceable, you are allowed to inspect and re-mark with a new expiration date which type of shelf life item?
- A.
I
- B.
II
- C.
III
- D.
IV
Correct Answer
B. II -
- 29.
Which of the following is not an obvious sign of pollution?
- A.
Oil sheen on standing water
- B.
Stressed vegetation
- C.
Stains on ground
- D.
Cloudy water
Correct Answer
D. Cloudy water -
- 30.
Who is responsible for developing a hazard communication (HAZCOM) training plan to notify personnel of all known hazards they may be exposed to in a particular work center?
- A.
Operations officer
- B.
Section supervisor
- C.
SQ/CC
- D.
Squadron safety monitor
Correct Answer
B. Section supervisor -
- 31.
In the (MXG), who is responsible for establishing procedures and controls for the local manufacture of tools, parts, and other items as required by technical guidance?
- A.
MX/CC
- B.
MXG Vice Commander
- C.
MXG Superintendent
- D.
MXG/CC
Correct Answer
D. MXG/CC -
- 32.
Who in the MXG is responsible for ensuring the capability exists to meet local manufacture requirements?
- A.
MXG Commander
- B.
MXG Superintendent
- C.
MXG Vice Commander
- D.
MXS Operations officer/MX SUPT
Correct Answer
D. MXS Operations officer/MX SUPT -
- 33.
Who must appoint an individual to be an equipment account custodian?
- A.
Section supervisor
- B.
Squadron commander
- C.
Flight commander/chief
- D.
Operations officer/MX SUPT
Correct Answer
B. Squadron commander -
- 34.
An individual must receive what specific block of supply training before assuming duties as a DIFM monitor?
- A.
I
- B.
III
- C.
IIB
- D.
IIA
Correct Answer
C. IIB -
- 35.
Which of the following is not covered in the Precious Metal Recovery Program?
- A.
Silver
- B.
Cooper
- C.
Iridium
- D.
Rhodium
Correct Answer
B. Cooper -
- 36.
Which PMIC indicates that an item of supply does not contain a precious metal?
- A.
A
- B.
C
- C.
G
- D.
P
Correct Answer
A. A -
- 37.
Which PMIC indicates that an item of supply contains a combination of two or more precious metals?
- A.
A
- B.
C
- C.
G
- D.
P
Correct Answer
B. C -
- 38.
Which supply tracking document provides information on all document numbers processed during the day?
- A.
D18, Priority monitor report
- B.
D04, Daily Document Register
- C.
M-24, Organization Effectiveness Report
- D.
D23, Repair Cycle Asset Management List
Correct Answer
A. D18, Priority monitor report -
- 39.
Which supply tracking document provides information on all document numbers processed during the day?
- A.
D18, Priority monitor report
- B.
D04, Daily Document Register
- C.
M-24, Organization Effectiveness Report
- D.
D23, Repair Cycle Asset Management List
Correct Answer
A. D18, Priority monitor report -
- 40.
Which supply tracking document provides a management product for monitoring issue and bench stock supply report?
- A.
D18, Priority Monitor Report
- B.
D04, Daily Document Register
- C.
M-24, Organization Effectiveness Report
- D.
D23, Repair Cycle Asset Management List
Correct Answer
C. M-24, Organization Effectiveness Report -
- 41.
Which LRS office accounts for special purpose recoverable authorized maintenance (SPRAM) assets managed on in used detail records?
- A.
Flight Service Center (FSC)
- B.
Equipment Liaison Office (ELO)
- C.
Command Equipment Management Office (CEMO)
- D.
DRMO
Correct Answer
B. Equipment Liaison Office (ELO) -
- 42.
What is the special purpose recoverable authorized maintenance flag code for stand alone spares?
- A.
F
- B.
D
- C.
B
- D.
A
Correct Answer
D. A -
- 43.
What is the special purpose recoverable authorized maintenance flag code for fault isolation spares?
- A.
F
- B.
D
- C.
B
- D.
A
Correct Answer
A. F -
- 44.
Who is the final authority for reviewing a unit's list of supply assets requiring functional check, calibration, or operational flight programing?
- A.
Flight commander/chief
- B.
MXG/CC
- C.
LRS Chief Inspector
- D.
Operations Officer/MX SUPT
Correct Answer
C. LRS Chief Inspector -
- 45.
Which of the following is not normally in the review chain for items listed as supply assets requiring locally performed functional check, calibration, or operational flight programming?
- A.
Operations Officer/MX SUPT
- B.
LRS Chief Inspector
- C.
MXG/CC
- D.
Flight commander/chief
Correct Answer
C. MXG/CC -
- 46.
Who ultimately determines if the security provided at a transient location is adecuate for clasified assets installed on an aircraft?
- A.
Aircraft commander
- B.
Host installation commander
- C.
Operations Group Commander
- D.
Mission Support Group Commander
Correct Answer
A. Aircraft commander -
- 47.
Who is responsible for the immediate security of clasified equipment installed on an aircraft after it makes an emergency landing?
- A.
Nearest military installation
- B.
Local law enforcement
- C.
Aircraft commander
- D.
Local fire chief
Correct Answer
C. Aircraft commander -
- 48.
When the aircraft owner or user does not stay with the aircraft, she/he must arrange for security checks to be accomplished every
- A.
Hour
- B.
2 hours
- C.
3 hours
- D.
4 hours
Correct Answer
C. 3 hours -
- 49.
What supply delivery priority is appropriate for primary mission aircraft 13 hours after landing?
- A.
1
- B.
2
- C.
3
- D.
4
Correct Answer
C. 3 -
- 50.
What supply delivery priority is appropriate for bench stock requirements?
- A.
4
- B.
5
- C.
6
- D.
7
Correct Answer
B. 5 -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jun 03, 2021Quiz Edited by
ProProfs Editorial Team -
Jan 18, 2012Quiz Created by
SSgtHensley
- 1W0510 Quizzes
- 2A251 Quizzes
- 2A552 Quizzes
- 2A651 Quizzes
- 2A654 Quizzes
- 2A656 Quizzes
- 2A671 Quizzes
- 2A672 Quizzes
- 2A6X1 Quizzes
- 2A753 Quizzes
- 2A852 Quizzes
- 2S051 Quizzes
- 2s071 Quizzes
- 2T251 Quizzes
- 3d052 Quizzes
- 3d054 Quizzes
- 3D151 Quizzes
- 3D152 Quizzes
- 3d1x3 Quizzes
- 3DX7X Quizzes
- 3e451 Quizzes
- 3e6x1 Quizzes
- 3P071 Quizzes
- 4a051 Quizzes
- 5j0x1 Quizzes
- Z3D153 Quizzes
- Z3dx7x Quizzes
- Z3p051 Quizzes
Back to top