2AX7X EOC Pretest
- 1.
Which type of maintenance ensures that equipment is ready and available at the time of need?
- A.
Off-Equipment
- B.
On-Equipment
- C.
Preventative
- D.
Corrective
Correct Answer
C. Preventative -
- 2.
Which of the following is used to highlight trends, benchmarks, or safety conditions relating to maintenance equipment, personnel, training, or processes?
- A.
Cross-Tells
- B.
Self-Inspections
- C.
Technical Orders
- D.
National Stock Numbers
Correct Answer
A. Cross-Tells -
- 3.
Who is the office of primary responsibility (OPR) for the Intermediate Repair Enhancement Program?
- A.
Wing Commander
- B.
Wing Vice-Commander
- C.
Maintenance Group Commander
- D.
Maintenance Group Superintendent
Correct Answer
C. Maintenance Group Commander -
- 4.
Which maintenance capability category is performed at backshop level and consists of off-equipment maintanence?
- A.
Two-level maintenance
- B.
Organizational
- C.
Intermediate
- D.
Depot
Correct Answer
C. Intermediate -
- 5.
All requests for depot level assistance must be coordinated through?
- A.
Plans, Scheduling, and Documentation and the Maintenance Group Commander
- B.
Plans, Scheduling, and Documentation and Maintenance Management Analysis
- C.
Quality Assurance and Plans, Scheduling, and Documentation
- D.
Quality Assurance and Maintenance Management Analysis
Correct Answer
C. Quality Assurance and Plans, Scheduling, and Documentation -
- 6.
What do you call wing level maintenance facilities providing intermediate-level maintenance repair support for multiple Air Force units within a particular theater of operations?
- A.
Regional Repair Centers
- B.
Centralized Repair Facilities
- C.
Programmed Depot Maintanence
- D.
Intermediate Repair Enhancement Program
Correct Answer
B. Centralized Repair Facilities -
- 7.
What program promotes identifying and correcting system deficiencies before they affect combat capability?
- A.
Quality Assurance
- B.
Reliability and Maintainability
- C.
Programmed Depot Maintanence
- D.
Intermediate Repair Enhancement
Correct Answer
B. Reliability and Maintainability -
- 8.
Which category of Deficiency Report should you submit if the equipment has a deficiency that if uncorrected, may cause major loss or damage to equipment and no workaround is known?
- A.
1A
- B.
1B
- C.
2A
- D.
2B
Correct Answer
B. 1B -
- 9.
Which Maintenance Group agency provides technical assistance for Deficiency Reports to work center supervisors?
- A.
Plans, Scheduling, and Documentation
- B.
Programs and Resources Flight
- C.
Maintenance Supply Liaison
- D.
Quality Assurance
Correct Answer
D. Quality Assurance -
- 10.
Which of the following is used to assign responsibilities, direct actions, and prescribe procedures within a subordinate function?
- A.
Technical Orders
- B.
Support Agreements
- C.
Air Force Instructions
- D.
Operating Instructions
Correct Answer
D. Operating Instructions -
- 11.
When Operating Instructions (OI) apply to multiple groups, they should be published as?
- A.
Wing OI's
- B.
Separate Group OI's
- C.
Support Agreements
- D.
Air Force Instructions
Correct Answer
A. Wing OI's -
- 12.
Which AFTO IMT is used to maintain a permanent history of significant maintenance actions on end-items of equipment?
- A.
95
- B.
244
- C.
427
- D.
781 Series
Correct Answer
A. 95 -
- 13.
Printed copies of the AFTO IMT 95 are not required to accompany end items upon transfer...
- A.
In units where jet engines,jet engine adjustable nozzles, or thrust reversers are involved in frequent rotation from aerospace vehicle to another.
- B.
As long as an entry has been made in the necessary maintenance information system verifying that the basic items have been accounted for.
- C.
To/from locations that have access to the necessary maintenance information systems to retrieve the historical information.
- D.
In the case of helicopter blades and tail rotor blades being transferred into the disposal system.
Correct Answer
C. To/from locations that have access to the necessary maintenance information systems to retrieve the historical information. -
- 14.
What AFTO IMT is used to document accumulated cycles, operating time, and maintenance history, as well as pertinent manufacturing data for jet engine turbine wheels?
- A.
781J
- B.
245
- C.
244
- D.
95
Correct Answer
D. 95 -
- 15.
Which IMDS-Central Database subsystem provides the capability to track engines and their components for time-changes and inspections and establishes and maintains the installed-on relationship between the engine and components?
- A.
C-E Equipment Status
- B.
Job Data Documentation
- C.
Status and Inventory Reporting
- D.
Comprehensive Engine Management System
Correct Answer
D. Comprehensive Engine Management System -
- 16.
Which IMDS-Central Database subsystem allows users to track maintenance actions and has both maintenance and supply data?
- A.
Operational Events
- B.
Maintenance Events
- C.
Job Data Documentation
- D.
Aircraft Automated Forms 781A, J, K
Correct Answer
B. Maintenance Events -
- 17.
Which IMDS subsystem replaces the Maintenance Data Collection (MDC) system and provides maintenance personnel with the online capability to document, inquire, and produce retrievals of maintenance actions?
- A.
Operational Events
- B.
Maintenance Events
- C.
Job Data Documentation
- D.
Aircraft Automated Forms 781A,J,K
Correct Answer
C. Job Data Documentation -
- 18.
Who guides the overall Data Integrity Team process and ensures the data provided to maintenance managers and supervision is meaningful and factual?
- A.
Plans, Scheduling, and Documentation
- B.
Maintenance Management Analysis
- C.
Programs and Resources
- D.
Every User
Correct Answer
B. Maintenance Management Analysis -
- 19.
In addition to being familiar with the unit's assigned weapon system, squadron representatives for the Data Integrity Team must be at least...
- A.
5-Level
- B.
7-Level
- C.
SrA
- D.
NCO
Correct Answer
A. 5-Level -
- 20.
What provides a measurement of unit performance and capability?
- A.
Metrics
- B.
Reports
- C.
Standards
- D.
Instructions
Correct Answer
A. Metrics -
- 21.
What are the two most common types of primary maintenance metric indicators?
- A.
Performance and health
- B.
Trending and impacting
- C.
Positive and negative
- D.
Leading and lagging
Correct Answer
D. Leading and lagging -
- 22.
Which primary maintenance metric indicator shows problems first, as they directly impact maintenance's capability to provide resources to execute the mission?
- A.
Leading
- B.
Lagging
- C.
Trending
- D.
Impacting
Correct Answer
A. Leading -
- 23.
Which primary maintenance metric indicator shows and follows firmly established trends?
- A.
Leading
- B.
Lagging
- C.
Trending
- D.
Impacting
Correct Answer
B. Lagging -
- 24.
Which maintenance repair priority is designated only for aircraft that are on alert status or aircraft that are supporting the war plan or national emergency missions?
- A.
1
- B.
2
- C.
3
- D.
4
Correct Answer
A. 1 -
- 25.
Who is responsible for establishing a crashed, damaged, or disabled aircraft recovery program?
- A.
Wing Commander
- B.
Wing Vice-Commander
- C.
Maintenance Group Commander
- D.
Maintenance Group Deputy Commander
Correct Answer
A. Wing Commander -
- 26.
Who is personally responsible for managing the FOD and DOP programs?
- A.
Wing Commander
- B.
Wing Vice-Commander
- C.
Maintenance Group Commander
- D.
Maintenance Group Deputy Commander
Correct Answer
B. Wing Vice-Commander -
- 27.
Who is responsible for standardizing maintenance discipline, procedures, organizations structures, compliance, and management philosophy?
- A.
Maintenance Group Deputy Commander
- B.
Maintenance Group Commander
- C.
Production Superintendent
- D.
Wing Commander
Correct Answer
B. Maintenance Group Commander -
- 28.
Who is responsible for chairing the daily maintenance production/scheduling meeting with representatives from throughout the MXG?
- A.
MXG Deputy Commander
- B.
Wing Vice-Commander
- C.
MXG Superintendent
- D.
MXG Commander
Correct Answer
A. MXG Deputy Commander -
- 29.
Who oversees the management of maintenance facilities and aircraft support equipment procurement and maintenance?
- A.
Maintenance Supply Liaison
- B.
Programs and Resources Flight
- C.
Maintenance Group Superintendent
- D.
Maintenance Group Deputy Commander
Correct Answer
C. Maintenance Group Superintendent -
- 30.
Who is held legally responsible for their unit's EPA program compliance in accordance with AFI 32-7042, Waste Management?
- A.
Flight Commanders
- B.
Squadron Commanders
- C.
Maintenance Operations Officers
- D.
Maintenance Group Commanders
Correct Answer
B. Squadron Commanders -
- 31.
Which commander is tasked with developing and publishing the wing flying/maintenance schedule in coordination with other squadron maintenance operations officers/maintenance superintendents?
- A.
Maintenance Squadron
- B.
Maintenance Operations Flight
- C.
Aircraft Maintenance Squadron
- D.
Maintenance Operations Squadron
Correct Answer
B. Maintenance Operations Flight -
- 32.
Worker safety and health information must be monitored, tracked, and documented using what AF IMT?
- A.
55
- B.
244
- C.
435
- D.
623
Correct Answer
A. 55 -
- 33.
Section NCOIC's are responsible for developing cross-utilization training requirements, ensuring they do not interfere with...
- A.
Accountability and Control Procedures
- B.
Deployments and Wing-Level Taskings
- C.
Qualification and Upgrade Training
- D.
Scheduled maintenance actions
Correct Answer
C. Qualification and Upgrade Training -
- 34.
Section NCOIC's must ensure their sections are organized with tools, equipment, and material as close to the Point of Maintenance without jeopardizing...
- A.
Accountability and Control Procedures
- B.
Qualification and Upgrade Training
- C.
Maintenance and Flying Schedules
- D.
Proper maintenance techniques
Correct Answer
A. Accountability and Control Procedures -
- 35.
When a maintenance squadron production superintendent is appointed, who must he or she inform of specialist non-availability to at the beginning of each shift?
- A.
Aircraft maintenance unit production superintendents
- B.
Maintenance Operation Center
- C.
Group manning manager
- D.
Squadron Commander
Correct Answer
B. Maintenance Operation Center -
- 36.
How many standard squadrons are in a maintenance group?
- A.
2
- B.
3
- C.
5
- D.
8
Correct Answer
B. 3 -
- 37.
Which Maintenance Operations Squadron flight is a centrally located agency responsible for monitoring and developing long-range strategies to sustain fleet health?
- A.
Maintenance Operations Center
- B.
Maintenance Training Flight
- C.
Maintenance Operations
- D.
Programs and Resources
Correct Answer
C. Maintenance Operations -
- 38.
The Maintenance Operations Center is responsible for the overall management of which IMDS subsystem?
- A.
Location
- B.
Operational Events
- C.
Maintenance Events
- D.
Status and Inventory Reporting
Correct Answer
A. Location -
- 39.
Which section is the wing focal point for engine health tracking and the engine health management program?
- A.
Aircraft Maintenance Unit Specialist Section
- B.
Jet Engine Intermediate Maintenance
- C.
Maintenance Operations Center
- D.
Engine Management
Correct Answer
D. Engine Management -
- 40.
Which Maintenance Operation Squadron section maintains standardized aircraft jacket files and attends pre-dock and post-dock inspections meetings?
- A.
Plans, Scheduling, and Documentation
- B.
Maintenance Management Analysis
- C.
Maintenance Operations Center
- D.
Production Superintendent
Correct Answer
A. Plans, Scheduling, and Documentation -
- 41.
The MTF normally consists of what two sections?
- A.
Education and Training; Development and Instruction
- B.
Training Management; Development and Instruction
- C.
Training Development; Instruction Management
- D.
Training Detachment; Training Management
Correct Answer
B. Training Management; Development and Instruction -
- 42.
What agency's basic mission is to launch and recover aircraft and to perform the necessary servicing, inspections, and maintenance to perform daily aircraft flying operations?
- A.
Transient Alert
- B.
Maintenance Flight
- C.
Aircraft Maintenance Unit
- D.
Maintenance Operations Squadron
Correct Answer
C. Aircraft Maintenance Unit -
- 43.
Which of the following is not a section within a standard aircraft maintenance unit?
- A.
Weapons
- B.
Debrief
- C.
Aircraft
- D.
Supply
Correct Answer
D. Supply -
- 44.
What does the Debrief section use to help identify fault codes to aid maintainers in aircraft troubleshooting?
- A.
Landing Status Codes
- B.
Fault Isolation Manuals
- C.
System Capability Codes
- D.
Fault Reporting Manuals
Correct Answer
D. Fault Reporting Manuals -
- 45.
Who must ensure the applicable aircraft form sets are provided to the Debrief section by the end of the flying day if debriefs are suspended due to aircraft flying surge operations?
- A.
Weapons Expediter or Specialist Expediter
- B.
Flight-Line Expediter or Aircraft Section Chief
- C.
Flight-Line Expediter or Production Superintendent
- D.
Aircraft Section Chief or Production Superintendent
Correct Answer
C. Flight-Line Expediter or Production Superintendent -
- 46.
The Aircraft section is split into two separate sections when and Aircraft Maintenance Unit's number of mission assigned aircraft is more than...
- A.
14
- B.
16
- C.
18
- D.
20
Correct Answer
C. 18 -
- 47.
Which section is normally responsible for aircraft troubleshooting, on-equipment repairs, component removal and installation, reprogramming avionics systems, and classified aircraft items management?
- A.
Avionics
- B.
Aircrafts
- C.
Specialist
- D.
Communication-Navigation
Correct Answer
C. Specialist -
- 48.
Which technicians maintain aircraft bleed air, vacuum, pneumatic, fire suppression, and oxygen systems, including removing and replacing associated system components?
- A.
Electro-Environmental Specialists
- B.
Propulsion Specialists
- C.
Avionics Specialists
- D.
Crew Chiefs
Correct Answer
A. Electro-Environmental Specialists -
- 49.
Who is responsible to the Weapons section chief for monitoring all armament systems maintenance and loading operations?
- A.
Load Crew Chief
- B.
Flight-Line Expediter
- C.
Weapons Expediter
- D.
Dedicated Crew Chief
Correct Answer
C. Weapons Expediter -
- 50.
Which section is tasked with the maintenance, control, and storage of alternate mission equipment, dash-21 equipment, and maintenance, safety, and protective equipment?
- A.
Aircraft
- B.
Support
- C.
Weapons
- D.
Armament Support
Correct Answer
B. Support -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jul 25, 2013Quiz Edited by
ProProfs Editorial Team -
Jul 18, 2013Quiz Created by
Firefly12
- Aptitude Test Quizzes
- Course Test Quizzes
- Driving Test Quizzes
- English Test Quizzes
- FCAT Quizzes
- General Knowledge Quizzes
- Intelligence Test Quizzes
- Medical Test Quizzes
- Mock Test Quizzes
- Philosophy Test Quizzes
- Practice Test Quizzes
- Safety Test Quizzes
- Skill Assessment Quizzes
- Spelling Test Quizzes
- Standardized Test Quizzes
Back to top