2A656 Volume 1
Electrical Enviornmental 5 Level Test
- 1.
There are how many levels of maintenance?
- A.
Two
- B.
Three
- C.
Four
- D.
Five
Correct Answer
B. Three -
- 2.
If you work on an aircraft on the flightline, you are doing which level of maintenance?
- A.
Depot
- B.
Intermediate
- C.
Organizational
- D.
Off-equipment
Correct Answer
C. Organizational -
- 3.
Who is responsible for managing the wing's quality assurance progams?
- A.
Flight Chief
- B.
Quality assurance section chief`
- C.
Maintenance group commander
- D.
Aircraft maintenance sqaudron commmander
Correct Answer
C. Maintenance group commander -
- 4.
Who is responsible for ensuring compliance with the wing Enviornmental Protection Agency program?
- A.
Wing commander
- B.
Squadron commander
- C.
Propulsion flight chief
- D.
Maintenance superintendent
Correct Answer
B. Squadron commander -
- 5.
Who is responsible to the squadron commander for maintenance production?
- A.
Maintenance group commander
- B.
Maintenance flight chief
- C.
Maintenance supervisior
- D.
Flight chief
Correct Answer
C. Maintenance supervisior -
- 6.
Who is responsible to the maintenace supervisor for the leadership, supervison, and training of assigned personnel?
- A.
Shift leader
- B.
Section chief
- C.
Flight commander/chief
- D.
Maintenance superintendent
Correct Answer
C. Flight commander/chief -
- 7.
Which flight is part of a maintenance squadron?
- A.
Test, measurement, and diagnostic equipment
- B.
Maintenance operations and progams
- C.
Quality assurance
- D.
Resources
Correct Answer
A. Test, measurement, and diagnostic equipment -
- 8.
Quality maintenance is the responsibility of maintenance technicians, supervisors, and commanders who work in concern with?
- A.
Maintenance training
- B.
Quality assurance
- C.
Resources
- D.
Egress
Correct Answer
B. Quality assurance -
- 9.
The Integrated Maintenance Data System (IMDS) Training Management Subsystem can be used to monitor?
- A.
Upgrade training
- B.
Optional training
- C.
Seasonal training
- D.
Qualitative training
Correct Answer
A. Upgrade training -
- 10.
Which is the correct method for writing 30 January 2011?
- A.
20110130
- B.
01/30/11
- C.
30/01/11
- D.
11/01/30
Correct Answer
A. 20110130 -
- 11.
A symbol entered on a maintenance form reflects the opinion of the?
- A.
Shop supervisor
- B.
Maintenance officer
- C.
Squadron commander
- D.
Individual making the entry
Correct Answer
D. Individual making the entry -
- 12.
When a new Air Force Technical Order (AFTO) Form 781A is initiated, what kind of discrepancies cannot be transferred to the AFTO Form 781K?
- A.
Red X
- B.
Red dash
- C.
Red diagonal
- D.
Discrepancies with a supply document number
Correct Answer
A. Red X -
- 13.
The Air Force Technical Order (AFTO) Form 244 is used to document discrepancies and corrective actions for?
- A.
Aircraft
- B.
Batteries
- C.
Equipment
- D.
Multimeters
Correct Answer
C. Equipment -
- 14.
The five authorized inspection concepts used by the Air Force are?
- A.
Major, minor, isochronal, postflight
- B.
Major, minor, shop, home station, postflight
- C.
Periodic, home station, postflight, isochronal, programmed depot maintenance
- D.
Periodic, phase, isochronal, programmed depot maintenance, airline/manufacturer maintenance
Correct Answer
D. Periodic, phase, isochronal, programmed depot maintenance, airline/manufacturer maintenance -
- 15.
Which inspection is used to detect defects that could have developed durning ground operation of an aircraft?
- A.
Preflight
- B.
Thruflight
- C.
Postflight
- D.
End-of-runway
Correct Answer
D. End-of-runway -
- 16.
Reducing the time an aircraft is out of commision is an objective of which inspection?
- A.
Phase
- B.
Hourly
- C.
Periodic
- D.
Isochronal
Correct Answer
A. Phase -
- 17.
Which is a thorough and searchng inspection?
- A.
Minor
- B.
Major
- C.
Postflight
- D.
Home station check
Correct Answer
B. Major -
- 18.
Which is not one of the elements of the maintenance training program?
- A.
Upgrade training
- B.
Managment training
- C.
Qualification training
- D.
Cross- Utilization training
Correct Answer
D. Cross- Utilization training -
- 19.
The primary responsibility for formal upgrade training rests with?
- A.
Training managment personnel
- B.
The commander
- C.
The supervisor
- D.
The individual
Correct Answer
B. The commander -
- 20.
What technical order (TO) explains the Material Deficiancy Reporting System?
- A.
00-5-15
- B.
00-25-195
- C.
00-35D-54
- D.
00-25C-234
Correct Answer
C. 00-35D-54 -
- 21.
A Category II, Product Quality Deficiency Report that has been submitted for a defect in workmanship must be forwarded to the screening point within?
- A.
1 workday
- B.
2 workdays
- C.
3 workdays
- D.
4 workdays
Correct Answer
C. 3 workdays -
- 22.
The first part of the national stock number indicates the?
- A.
Part code
- B.
Bureau code
- C.
Item identification
- D.
Supply classification
Correct Answer
D. Supply classification -
- 23.
The second posotion of the Expendability/ Recoverability/ Repairablility/ Category (ERRC) Designation Code indicates?
- A.
Expendability
- B.
Repair level
- C.
Supplier
- D.
Cost
Correct Answer
B. Repair level -
- 24.
Bench stock supplies should be replenished when the authorized quantity on-hand drops below what amount?
- A.
40%
- B.
50%
- C.
60%
- D.
70%
Correct Answer
B. 50% -
- 25.
Air Force property responsibility is imposed by law on?
- A.
Commanders only
- B.
All millitary employees
- C.
Comanders and supervisors only
- D.
All millitary and civillian employees
Correct Answer
D. All millitary and civillian employees -
- 26.
An airman who signs out a toolbox assumes which type of property responsibility for that toolbox?
- A.
Supervisory
- B.
Custodial
- C.
Individual
- D.
Command
Correct Answer
B. Custodial -
- 27.
What types of property responsibility can be changed to Department of Defense (DOD) pesonnel?
- A.
Command and custodial
- B.
Individual and custodial
- C.
Command and supervisory
- D.
Supervisory and custodial
Correct Answer
A. Command and custodial -
- 28.
Which publications are considered working handbooks?
- A.
Air Force Manuals
- B.
Air Force pamphlets
- C.
Air Force instructions
- D.
Recurring publications
Correct Answer
A. Air Force Manuals -
- 29.
The list of applicable publications (LOAP) lists Technical Orders that apply to?
- A.
Active aircraft time compliance technical orders
- B.
A specific aircraft
- C.
Overhaul depots
- D.
A specific tester
Correct Answer
B. A specific aircraft -
- 30.
Which technical order (TO) explains how to maintain and inspect a particular weapons system?
- A.
Operations and Maintenance
- B.
Method and Procedures
- C.
Time Compliance
- D.
Abbreviated
Correct Answer
A. Operations and Maintenance -
- 31.
A series of red X's printed around the border of the first page of time compliance technical order (TCTO) signifies?
- A.
An inspection action TCTO
- B.
An immediate action TCTO
- C.
An routine action TCTO
- D.
An urgent action TCTO
Correct Answer
B. An immediate action TCTO -
- 32.
What technical order (TO) explains the TO numbering system?
- A.
00-5-1
- B.
00-5-5
- C.
00-5-10
- D.
00-5-18
Correct Answer
D. 00-5-18 -
- 33.
In the basic technical order (TO) numbering system, what is the minimum groups of numbers each TO will have?
- A.
Two
- B.
Three
- C.
Four
- D.
Five
Correct Answer
B. Three -
- 34.
The first number group within a technical order (TO) number identifies the?
- A.
Specific equipment
- B.
Section of the TO
- C.
TO category
- D.
Kind of TO
Correct Answer
C. TO category -
- 35.
The Maintenance Integrated Data Access System (MIDAS) page number is?
- A.
A two-digit numbering system expressed as one element of two digits
- B.
A six-digit numbering system expressed as the elements of two digits each
- C.
A four-digit numbering system expressed as two elents of two digits each
- D.
An eight-digit numbering system expressed as four elements of two digits each
Correct Answer
B. A six-digit numbering system expressed as the elements of two digits each -
- 36.
Which kind of technical order (TO) contains operational checkout procedures?
- A.
Job Guide
- B.
Fault Isolation
- C.
General Vehicle
- D.
Schematic Diagram
Correct Answer
A. Job Guide -
- 37.
While troubleshooting, you are using a wiring diagram to help you locate a malfunctioning compnent. after determining which component is faulty, you want to determine its part number . To do this, you would check the wiring diagram's?
- A.
Numerical index
- B.
Reference designator
- C.
Line replaceable unit index
- D.
Line replaceable unit designation
Correct Answer
B. Reference designator -
- 38.
Revisions are issued when changes exceed what percentage of the basic TO?
- A.
50
- B.
60
- C.
70
- D.
80
Correct Answer
D. 80 -
- 39.
Saftey supplements to technical orders are identified with a border of?
- A.
Black SS's on the title page
- B.
Red SS's on the title page
- C.
Black SS's on all pages
- D.
Red SS's on all pages
Correct Answer
B. Red SS's on the title page -
- 40.
Which deficiency report is used for technical order (TO) deficiancy that invovles saftey or the unit mission?
- A.
Interim
- B.
Urgent
- C.
Routine
- D.
Emergency
Correct Answer
D. Emergency -
- 41.
Personnel at the Air Logistics Center (ALC) activity must act on an emergency Air Force technical order (AFTO) Form 22 report within how many hours of recipt?
- A.
24
- B.
36
- C.
48
- D.
72
Correct Answer
C. 48 -
- 42.
How far away from parked aircraft should liquid oxygen (LOX) carts be stored?
- A.
25 feet
- B.
50 feet
- C.
75 feet
- D.
100 feet
Correct Answer
C. 75 feet -
- 43.
When you are servicing an aircraft with liquid oxygen (LOX), do not wear?
- A.
Cuffless trousers
- B.
A battle dress uniform (BDU) cap
- C.
Leather welders gauntlet cuff gloves
- D.
Shoes which fit loosley around the top
Correct Answer
D. Shoes which fit loosley around the top -
- 44.
Liquid nitrogen must be stored below what minimum temperature to remain in a liquid state?
- A.
-310.8F
- B.
-315.8F
- C.
-320.8F
- D.
-325.8F
Correct Answer
C. -320.8F -
- 45.
What type of tasks may you perform in the immediate area of explosives?
- A.
Mission critical
- B.
Routine
- C.
None
- D.
Core
Correct Answer
A. Mission critical -
- 46.
What must you ensure when you are transporting squibs?
- A.
Not to exceed the maximum amount of squibs
- B.
Other personnel are not in the immediate area
- C.
The squibs are in a protective container
- D.
The use of a specially designed vehicle
Correct Answer
C. The squibs are in a protective container -
- 47.
How much electrical current does it take to cuse muscle paralysis?
- A.
.001 amps
- B.
.005 amps
- C.
.010 amps
- D.
.015 amps
Correct Answer
D. .015 amps -
- 48.
For personnel electrostatic discharge (ESD) grounding, you must use a skin contact wrist strap connected to the workbench surface. This strap must have a resistance of at least?
- A.
1 ohm
- B.
10 ohms
- C.
1 megaohm
- D.
10 megaohms
Correct Answer
C. 1 megaohm -
- 49.
Which situation illustrates a physical hazard presented by a chemical hazard?
- A.
Acute liver damage
- B.
Irritation of the kidney
- C.
Second degree skin burn
- D.
Chronic exposure to vapors
Correct Answer
C. Second degree skin burn -
- 50.
What is the minimum information required on a hazardous chemical inventory?
- A.
Name, location, and detailed ingrediant list of the material
- B.
Name, location, and quantity of material authorized
- C.
Name and location of the material
- D.
Name of the material
Correct Answer
D. Name of the material -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jan 19, 2017Quiz Edited by
ProProfs Editorial Team -
Mar 24, 2011Quiz Created by
Mikeynagle
- 1W0510 Quizzes
- 2A251 Quizzes
- 2A552 Quizzes
- 2A651 Quizzes
- 2A654 Quizzes
- 2A671 Quizzes
- 2A672 Quizzes
- 2A6X1 Quizzes
- 2A753 Quizzes
- 2A852 Quizzes
- 2S051 Quizzes
- 2s071 Quizzes
- 2T251 Quizzes
- 3d052 Quizzes
- 3d054 Quizzes
- 3D151 Quizzes
- 3D152 Quizzes
- 3d1x3 Quizzes
- 3DX7X Quizzes
- 3e451 Quizzes
- 3e6x1 Quizzes
- 3P071 Quizzes
- 4a051 Quizzes
- 5j0x1 Quizzes
- Z3D153 Quizzes
- Z3dx7x Quizzes
- Z3p051 Quizzes
Back to top