Water Resources Quiz Questions And Answers
(535).jpg "Water Resources Quiz Questions And Answers - Quiz")
Water is one of the most precious natural resources. Check out this water resources quiz with well-researched questions and answers that are given below to see how much you know about this resource. If you think you have good knowledge of this topic, then you must give this quiz a try and see how much you can score. So, do you feel ready to take this test? Let's get started then. Best of luck!
- 1.
Where is most of the Earth's freshwater located?
- A.
In icecaps and glaciers
- B.
In oceans
- C.
In storage tanks
- D.
In lakes
Correct Answer
A. In icecaps and glaciersExplanation
Most of the Earth's freshwater is located in icecaps and glaciers. These frozen bodies of water hold a significant amount of freshwater, which is locked up in the form of ice. The icecaps and glaciers are found in polar regions and high mountain ranges. They play a crucial role in maintaining the Earth's water cycle and act as natural reservoirs, slowly releasing freshwater over time. This is why they are a vital source of freshwater for rivers, lakes, and other water bodies, making them the largest storage of freshwater on Earth.Rate this question:
-
- 2.
How is Earth's water supply being continuously renewed?
- A.
Through photosynthesis
- B.
Through the water cycle
- C.
Through oceans
- D.
Through global warming
Correct Answer
B. Through the water cycleExplanation
The correct answer is through the water cycle. The water cycle is the continuous movement of water on, above, and below the Earth's surface. It involves processes such as evaporation, condensation, precipitation, and runoff. As water evaporates from the Earth's surface, it forms clouds and eventually falls back to the Earth as precipitation, replenishing the water supply. This cycle ensures that Earth's water supply is constantly renewed and available for various purposes such as drinking, agriculture, and sustaining ecosystems.Rate this question:
-
- 3.
Precipitation may ________ into groundwater.
- A.
Leak
- B.
Fall
- C.
Infiltrate
- D.
Flow
Correct Answer
C. InfiltrateExplanation
Precipitation may infiltrate into groundwater. This means that when it rains or snows, the water can seep into the ground and become part of the underground water system. Infiltration is an important process for replenishing groundwater supplies and maintaining water levels in aquifers. It helps to recharge wells and provides a natural filtration process as the water percolates through layers of soil and rock.Rate this question:
-
- 4.
Is it possible for groundwater to leave an aquifer?
- A.
Yes
- B.
No
- C.
Only under certain circumstances
- D.
Sometimes
Correct Answer
A. YesExplanation
Groundwater can leave an aquifer through various natural processes. One common way is through discharge, where groundwater flows out of the aquifer and into streams, rivers, or lakes. This can occur when the water table intersects with the land surface or when there is a pressure gradient that forces groundwater to move towards lower elevations. Additionally, human activities such as pumping water from wells can also cause groundwater to leave the aquifer. Therefore, it is possible for groundwater to leave an aquifer.Rate this question:
-
- 5.
Why can the depth of a water table be high in some places and low in others?
- A.
There is too much leaking occurring in certain spots
- B.
The depth changes due to precipitation, drought, or overuse of wells
- C.
Sedimentation occurs
- D.
All of the above
Correct Answer
B. The depth changes due to precipitation, drought, or overuse of wellsExplanation
The depth of a water table can vary in different locations due to various factors. Precipitation, drought, and overuse of wells can all contribute to changes in the water table depth. In areas with high precipitation, the water table may be higher as there is more water entering the system. Conversely, during droughts, the water table can become lower as there is less water available. Overuse of wells can also lower the water table as it depletes the groundwater resources. Therefore, all of the mentioned factors can cause variations in the depth of the water table.Rate this question:
-
- 6.
Why is it possible for the rate of movement to vary?
- A.
It can be because of the amount of precipitation, porosity of the rock, and slope of the aquifer
- B.
There is too much precipitation at one time
- C.
There is unknown variables that lead to the outcome
- D.
None of the above
Correct Answer
A. It can be because of the amount of precipitation, porosity of the rock, and slope of the aquiferExplanation
The rate of movement in aquifers can vary due to factors such as the amount of precipitation, the porosity of the rock (which affects water flow), and the slope of the aquifer, all of which influence the movement of groundwater.Rate this question:
-
- 7.
Can groundwater be accessed by drilling wells?
- A.
No
- B.
Yes
- C.
Only if the amount of precipitation is low
- D.
Sometimes
Correct Answer
B. YesExplanation
Groundwater can be accessed by drilling wells. Wells are typically drilled deep into the ground to reach the water table, which is the level at which the ground is saturated with water. By drilling a well, water can be extracted from the underground aquifer, providing a source of groundwater for various purposes such as drinking water or irrigation.Rate this question:
-
- 8.
44% of all the freshwater is used by __________.
- A.
Men
- B.
Recreational activities
- C.
Industry
- D.
Animals
Correct Answer
C. IndustryExplanation
The correct answer is industry because industries such as manufacturing, mining, and power generation require large amounts of water for their operations. They use freshwater for various purposes such as cooling machinery, processing raw materials, and generating electricity. As a result, a significant portion of the world's freshwater resources is consumed by industrial activities.Rate this question:
-
- 9.
What kind of water is needed for agricultural use?
- A.
Freshwater
- B.
Salt water
- C.
Groundwater
- D.
None of the above
Correct Answer
A. FreshwaterExplanation
Freshwater is needed for agricultural use because it contains low levels of dissolved salts and minerals, making it suitable for irrigation and crop growth. Saltwater and groundwater are not ideal for agricultural use because saltwater can damage crops and groundwater may contain high levels of minerals that can be harmful to plants. Therefore, freshwater is the most appropriate type of water for agricultural purposes.Rate this question:
-
- 10.
What is irrigation?
- A.
Plowing the fields
- B.
The process of bringing water to an area for use in growing crops
- C.
Bringing groundwater to crops when they are dying
- D.
None of the above
Correct Answer
B. The process of bringing water to an area for use in growing cropsExplanation
Irrigation is the process of bringing water to an area for use in growing crops. This involves supplying water to the fields through various methods such as canals, pipes, or sprinklers. Plowing the fields is a separate activity that prepares the soil for planting. Bringing groundwater to crops when they are dying may be a part of irrigation, but it is not a comprehensive definition of the term. Therefore, the correct answer is the process of bringing water to an area for use in growing crops.Rate this question:
-
- 11.
What is one problem with overdraft?
- A.
Intrusion of saltwater into freshwater aquifers
- B.
Sinking of bedrock
- C.
Both of the answers listed above
- D.
All of the above
Correct Answer
C. Both of the answers listed aboveExplanation
The given answer states that both intrusion of saltwater into freshwater aquifers and sinking of bedrock are problems associated with overdraft. This suggests that overdraft can lead to the contamination of freshwater sources with saltwater and can also cause the sinking or subsidence of the underlying bedrock.Rate this question:
-
- 12.
What is desalination?
- A.
The process by which salts are removed from the water
- B.
When water is heated to boiling so water evaporated but salt remains; water vapor is cooled and fresh water collected
- C.
Removing water vapor from local areas
- D.
None of the above
Correct Answer
A. The process by which salts are removed from the waterExplanation
Desalination is the process by which salts are removed from the water. This involves removing the dissolved salts and impurities from seawater or brackish water to produce fresh water that is suitable for human consumption or irrigation. This process usually involves techniques such as reverse osmosis, distillation, or electrodialysis. By removing the salts, desalination makes it possible to obtain freshwater from otherwise unusable sources like the ocean.Rate this question:
-
- 13.
What is freezing?
- A.
Being very cold
- B.
Putting a liquid in an area that is frozen and taking it out once it has become a solid
- C.
When salt water is frozen and separates, forming an ice and brine slush; ice can be melted to obtain fresh water
- D.
None of the above
Correct Answer
C. When salt water is frozen and separates, forming an ice and brine slush; ice can be melted to obtain fresh waterExplanation
Freezing refers to the process of salt water being frozen and separating into ice and brine slush. This separation allows for the ice to be melted, resulting in the extraction of fresh water.Rate this question:
-
- 14.
What does unpotable mean?
- A.
Sanitary water
- B.
Unfit to drink
- C.
Being ready to deliver boxes
- D.
Non transferable
Correct Answer
B. Unfit to drinkExplanation
The term "unpotable" refers to water that is not safe or suitable for drinking. This means that the water may contain contaminants or impurities that can be harmful if consumed. Therefore, the correct answer is "unfit to drink."Rate this question:
-
- 15.
What does screening do?
- A.
Traps and removes large debris from water
- B.
Traps out moths and insects from entering water
- C.
Removes larvae from water
- D.
Purifies the seawater
Correct Answer
A. Traps and removes large debris from waterExplanation
Screening is a process that involves the use of a physical barrier, such as a mesh or filter, to trap and remove large debris from water. This helps to prevent the debris from entering a system or body of water, ensuring that the water remains clean and free from any potential contaminants. By effectively removing large debris, screening helps to improve the overall quality of the water and maintain its usability for various purposes.Rate this question:
-
- 16.
Is chlorine a chemical that can be used in sterilization?
- A.
Yes
- B.
Rarely
- C.
No
Correct Answer
A. YesExplanation
Yes, chlorine is a chemical that can be used in sterilization. It is often used as a disinfectant and sterilizing agent in various forms, such as chlorine gas, sodium hypochlorite (bleach), or chloramine, to kill or inactivate microorganisms and ensure aseptic conditions.Rate this question:
-
- 17.
How are water resources renewed?
- A.
Through the water cycle
- B.
They cannot be
- C.
Through recycling
- D.
None of the above
Correct Answer
A. Through the water cycleExplanation
Water resources are renewed through the water cycle. The water cycle is a continuous process in which water evaporates from bodies of water, forms clouds, falls back to the earth as precipitation, and then flows into rivers and streams, eventually returning to the oceans. This cycle allows for the renewal and redistribution of water resources, ensuring a continuous supply of water for various uses such as drinking, agriculture, and industry.Rate this question:
-
- 18.
What is one type of use for water resources?
- A.
Industrial
- B.
Mental
- C.
Recycling
- D.
Reusing
Correct Answer
A. IndustrialExplanation
Industrial use is one type of use for water resources. This refers to the use of water in various industries such as manufacturing, power generation, and agriculture. Industries require water for processes like cooling, cleaning, and as a raw material in their production. Water resources play a crucial role in supporting industrial activities and ensuring their sustainability.Rate this question:
-
- 19.
What happens when run-off gets caught in low places?
- A.
It becomes standing water
- B.
It falls flat
- C.
It gets stuck
- D.
Water stops flowing
Correct Answer
A. It becomes standing waterExplanation
When run-off gets caught in low places, it becomes standing water. This occurs because the low areas prevent the water from flowing or draining away. Instead, the water accumulates and remains stagnant, forming pools or puddles.Rate this question:
-
- 20.
Freshwater is more plentiful than groundwater.
- A.
Yes
- B.
No
- C.
Can't say
- D.
Maybe
Correct Answer
B. NoExplanation
The given statement is "Freshwater is more plentiful than groundwater." The correct answer is "No." This means that freshwater is not more plentiful than groundwater. This suggests that groundwater is more abundant or readily available compared to freshwater.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Feb 02, 2024Quiz Edited by
ProProfs Editorial Team -
Jan 02, 2011Quiz Created by
Denamicic
- Air Quizzes
- Atmosphere Quizzes
- Beach Quizzes
- Biome Quizzes
- Conservation Quizzes
- Desert Quizzes
- Diffusion Quizzes
- Disaster Quizzes
- Ecosystem Quizzes
- Evolution Quizzes
- Fire Quizzes
- Flower Quizzes
- Forest Quizzes
- Global Warming Quizzes
- Lake Quizzes
- Landform Quizzes
- Mountain Quizzes
- Natural Resource Quizzes
- Nature Of Matter Quizzes
- Osmosis Quizzes
- Plant Quizzes
- Pollution Quizzes
- Recycling Quizzes
- River Quizzes
- Sea Quizzes
- Season Quizzes
- Snow Quizzes
- Soil Quizzes
- Wildlife Quizzes
- Wind Quizzes
Back to top