# Soal Produktif Tkj Kelas Xii Smkn 3 Jepara

Approved & Edited by ProProfs Editorial Team
At ProProfs Quizzes, our dedicated in-house team of experts takes pride in their work. With a sharp eye for detail, they meticulously review each quiz. This ensures that every quiz, taken by over 100 million users, meets our standards of accuracy, clarity, and engagement.
Learn about Our Editorial Process
| Written by Ulilluqman
U
Ulilluqman
Community Contributor
Quizzes Created: 1 | Total Attempts: 3,219
Questions: 20 | Attempts: 3,219

Settings

Latihan soal produktif TKJ

• 1.

### Jenis kabel UTP – cross through - berfungsi untuk menghubungkan hal-hal berikut...

• A.

Komputer ke Hub

• B.

Hub ke Hub

• C.

Komputer ke swich

• D.

Swich ke Swich

• E.

Komputer ke Printer

B. Hub ke Hub
Explanation
The correct answer is "Hub ke Hub". UTP cross through cable is used to connect two hubs together.

Rate this question:

• 2.

### Berapakah kecepatan maksimal yang dapat dicapai oleh kabel ethernet cat5?

• A.

10 Mbps

• B.

100 Mbps

• C.

1000 Mbps

• D.

10000 Mbps

• E.

100000 Mbps

B. 100 Mbps
Explanation
The maximum speed that can be achieved by a Cat5 Ethernet cable is 100 Mbps.

Rate this question:

• 3.

### Pemasangan dengan maka posisi warnanya untuk satu konektor  ke konektor lain seperti tabel di bawah ini adalah untuk kabel jenis..   Putih Orange   Putih Orange Orange   Orange Putih Hijau   Putih Hijau Biru   Biru Putih Biru   Putih Biru Hijau   Hijau Putih Coklat   Putih Coklat Coklat   Coklat

• A.

Straight through

• B.

Crossed

• C.

Straped

• D.

Multi cross

• E.

Semua jawaban benar

A. Straight through
Explanation
The given table shows the color positions for one connector to another, and it follows the pattern of a straight through cable. In a straight through cable, the color positions on one end of the cable match the color positions on the other end, allowing for a direct connection between devices.

Rate this question:

• 4.

### Dalam melakukan proses instalasi kabel jaringan perlu diperhatikan ketentuan yang berlaku  mengenai hal-hal yang harus dihindari dalam pemasangan kabel, hal-hal dibawah ini adalah hal yang harus dihindari kecuali :

• A.

Hindarilah pemasangan kabel jaringan yang sejajar (atau berdekatan) dengan kabel listrik.

• B.

Hindarilah pembengkokan kabel secara berlebih dan untuk penggulungan kabel memiliki diameter minimal 60cm

• C.

Jika akan melakukan penggabungan kabel menggunakan kabel pengikat, janganlah mengikat terlalu kencang sehingga menyebabkan deformasi pada kabel

• D.

Jauhkan kabel dengan perangkat yang dapat menyebabkan noise semisal mesin fotokopi, pemanas air, speaker, microwave, telepon, dll.

• E.

Jangan dekatkan kabel dengan Pemasangnya

B. Hindarilah pembengkokan kabel secara berlebih dan untuk penggulungan kabel memiliki diameter minimal 60cm
Explanation
The other options listed in the question are things that should be avoided when installing network cables. However, the option "Hindarilah pembengkokan kabel secara berlebih dan untuk penggulungan kabel memiliki diameter minimal 60cm" is the exception because it is a requirement that should be followed. It states that excessive bending of the cable should be avoided and the cable should be coiled with a minimum diameter of 60cm. Therefore, this option is the one that should not be avoided.

Rate this question:

• 5.

### Topologi apakah yang pada umumnya digunakan oleh kabel ethernet ?

• A.

Linier / Bus

• B.

Star

• C.

Ring

• D.

Mesh

• E.

Top

B. Star
Explanation
The most commonly used topology for Ethernet cables is the star topology. In this topology, all devices are connected to a central hub or switch, forming a star-like structure. Each device has its own dedicated connection to the central hub, allowing for efficient communication and easy troubleshooting. This topology also offers high reliability, as a failure in one device or cable does not affect the rest of the network.

Rate this question:

• 6.

### Berapakah jarak maksimum kable UTP dari Hub menuju Server ?

• A.

8 m

• B.

12 m

• C.

62 m

• D.

80 m

• E.

100 m

A. 8 m
Explanation
Based on the given options, the correct answer is 8 m. This suggests that the maximum distance for UTP cable from the Hub to the Server is 8 meters.

Rate this question:

• 7.

### Ada 3 standar dalam jaringan Nirkabel kecuali

• A.

802.11a

• B.

802.11g

• C.

802.11b

• D.

802.11g

• E.

802.11i

E. 802.11i
Explanation
The correct answer is 802.11i. The explanation is that 802.11i is not a standard in wireless networks. The other options, 802.11a, 802.11g, and 802.11b, are all standards in wireless networks.

Rate this question:

• 8.

### Alat yang biasa digunakan untuk menghubungkan 2 gedung di mana karena kondisi fisiknya tidak memungkinkan adanya penghubung kabel adalah

• A.

Hub

• B.

Acsess Point

• C.

Swich

• D.

Crimping

• E.

Bridge

E. Bridge
Explanation
A bridge is commonly used to connect two buildings where it is not physically possible to have a cable connection. A bridge acts as a link between two separate networks and allows communication between them. It can extend the range of a network and provide connectivity in situations where running cables is not feasible or practical.

Rate this question:

• 9.

### Berapa besar maksimum akses data rate yang bisa disediakan oleh access point ?

• A.

2 Mbps

• B.

5 Mbps

• C.

11 Mbps

• D.

54 Mbps

• E.

128 Mbps

D. 54 Mbps
Explanation
The maximum data rate that can be provided by an access point is 54 Mbps. This means that the access point can transmit data at a maximum speed of 54 megabits per second. This data rate allows for faster and more efficient communication between devices connected to the access point, enabling smoother internet browsing, file transfers, and streaming.

Rate this question:

• 10.

### Apabila sebuah IP memiliki /28.Berapakah subnet yang dimiliki ?

• A.

255.255.255.128

• B.

255.255.255.192

• C.

255.255.255.240

• D.

255.255.255.242

• E.

255.255.255.248

C. 255.255.255.240
Explanation
The given correct answer is 255.255.255.240. This is because a /28 subnet mask has 4 bits borrowed from the host portion of the IP address. This means that there are 4 bits available for creating subnets. Each bit can have 2 possible values (0 or 1), so there are a total of 2^4 = 16 possible subnets. The subnet mask 255.255.255.240 has the first 4 bits of the last octet set to 1, which means it can represent 16 subnets.

Rate this question:

• 11.

### Berikut ini adalah factor – factor yang perlu diperhatikan dalam sharing sumber daya adalah, kecuali:

• A.

Kabel

• B.

Security

• C.

Sistem Operasi

• D.

Driver Hardware

• E.

Network scanning software

E. Network scanning software
Explanation
The factors that need to be considered in sharing resources are cable, security, system operating, and driver hardware. Network scanning software is not a factor that needs to be considered in sharing resources. This software is used to scan a network for vulnerabilities or to monitor network traffic, but it is not directly related to the sharing of resources.

Rate this question:

• 12.

### Cara untuk membuka file sharing di computer lain adalah:

• A.

\\namakomputer\folder

• B.

//namakomputer\folder

• C.

/namakomputer/folder

• D.

//namakomputer/folder

• E.

\\namakomputer\\folder

A. \\namakomputer\folder
Explanation
The correct answer is \amakomputer\folder. This is the correct format for accessing a shared folder on another computer using the Windows file sharing protocol. The backslashes (\) are used to indicate the path to the shared folder on the remote computer.

Rate this question:

• 13.

### Gembok pada icon network connections mengindikasikan

• A.

Network tidak terkoneksi

• B.

Fitur firewall aktif

• C.

Network dikunci dan tidak bisa diakses

• D.

Network down

• E.

Virus Terproteksi

B. Fitur firewall aktif
Explanation
The correct answer is "Fitur firewall aktif". The padlock on the network connections icon indicates that the firewall feature is active. This means that the network is protected and secure, as the firewall helps to block unauthorized access and potential threats from entering the network.

Rate this question:

• 14.

### Pernyataan yang benar tentang IP adalah...

• A.

Internet Port

• B.

Internet Powered

• C.

Internet Profider

• D.

Interface Port

• E.

Internet Protocol

E. Internet Protocol
Explanation
The correct answer is "Internet Protocol". IP stands for Internet Protocol, which is a set of rules that governs the format and transmission of data packets over the internet. It is responsible for addressing and routing data packets between devices on a network.

Rate this question:

• 15.

### Apa kepanjangan dari DHCP?

• A.

Dynamic Host Control Protocol

• B.

Dinamika Host Cable Protocol

• C.

Dummy Host Conference Port

• D.

Dynamic Host Configuration Protocol

• E.

Distiled Host Control Protocol

D. Dynamic Host Configuration Protocol
Explanation
The correct answer is Dynamic Host Configuration Protocol. DHCP is a network management protocol used to assign IP addresses and other network configuration parameters to devices on a network. It allows for the automatic allocation of IP addresses, making it easier to manage and configure network devices.

Rate this question:

• 16.

### NIC Disebut juga dengan...

• A.

Kartu Grafis (Graphic Card)

• B.

Kartu Suara (Sound Card)

• C.

Kartu Ethernet (Ethernet Card)

• D.

Kartu Pintar (Smart Card)

• E.

Kartu Pengenal

C. Kartu Ethernet (Ethernet Card)
Explanation
NIC stands for Network Interface Card. It is a hardware component that allows a computer to connect to a network. It enables the computer to send and receive data over a network, such as the internet. The other options mentioned are different types of cards used in computers for specific purposes, but they are not synonymous with NIC. Therefore, the correct answer is Kartu Ethernet (Ethernet Card), as it specifically refers to the card used for network connectivity.

Rate this question:

• 17.

### Ada berapa jenis konfigurasi alamat IP...

• A.

3, yaitu langsung, tidak langsung, manual

• B.

3, yaitu otomatis, semi-otomatis, dinamis

• C.

1, yaitu konfigurasi secara dinamis

• D.

1, yaitu konfigurasi secara statis

• E.

2, yaitu konfigurasi secara statis dan dinamis

E. 2, yaitu konfigurasi secara statis dan dinamis
Explanation
The correct answer is 2, which states that there are two types of IP address configurations: static and dynamic. Static configuration refers to manually assigning an IP address to a device, while dynamic configuration involves the use of DHCP (Dynamic Host Configuration Protocol) to automatically assign IP addresses to devices on a network.

Rate this question:

• 18.

### Orang yang bertanggung jawab dalam suatu pengaturan network disebut dengan

• A.

Webmaster

• B.

• C.

• D.

Programmer

• E.

Developer

Explanation
A network administrator is responsible for managing and maintaining the network infrastructure of an organization. They are in charge of setting up and configuring network devices, monitoring network performance, troubleshooting network issues, and ensuring network security. They play a crucial role in ensuring the smooth operation of the network and the connectivity of all devices within the network.

Rate this question:

• 19.

### Berikut ini manakah yang tidak termasuk dalam jenis konektifitas WAN

• A.

Circuit Switching

• B.

Packet Switching

• C.

OSPF

• D.

Leased Line

• E.

Semua Jawaban Benar

C. OSPF
Explanation
OSPF (Open Shortest Path First) is a routing protocol used in computer networks. It is not a type of connectivity but rather a protocol used for routing data packets within a network. Unlike circuit switching, packet switching, and leased lines which are all types of connectivity options for wide area networks (WANs), OSPF is not directly involved in establishing connections or transmitting data across a network. Therefore, OSPF does not belong to the category of connectivity options for WANs.

Rate this question:

• 20.

• A.

2,3,4,5

• B.

1,3,5,6

• C.

1,2,3,4

• D.

1,4,5,6

• E.

1,2,3,6