Machine Knowledge Test

16 Questions | Total Attempts: 43

SettingsSettingsSettings
Please wait...
Machine Quizzes & Trivia

A multiple choice test for the 2009 SMT machine


Questions and Answers
  • 1. 
    Which cleaning rollers are driven by the main drive gear on this machine?
    • A. 

      Both

    • B. 

      Top

    • C. 

      Bottom

  • 2. 
    What is the main advantage to having Nanocleen rollers in the SMT?
    • A. 

      They look good

    • B. 

      Easy to clean

    • C. 

      Static dissipating properties

  • 3. 
    How many specific board programs can be stored in the PLC ?
    • A. 

      15

    • B. 

      22

    • C. 

      4

  • 4. 
    Which length of SMT machine can you NOT fully remove the pullout carriage ?
    • A. 

      300

    • B. 

      400

    • C. 

      600

  • 5. 
    Why will the Static Monitoring system add value to your process ?
    • A. 

      Nice to have feature

    • B. 

      Ensures set static levels are maintained within the process

    • C. 

      Tells the operator to purge the adhesive rolls

  • 6. 
    In the single side SMT which side of the board is cleaned ?
    • A. 

      Both sides

    • B. 

      Bottom side

    • C. 

      Top side

  • 7. 
    What is the function of the Brush Support system ?
    • A. 

      Cleans the bottom side of the board

    • B. 

      Supports the underside of the board during top side cleaning

    • C. 

      Look good in the machine

  • 8. 
    What are the white brackets attached to the stand for ?
    • A. 

      To ensure the machine is held in a fixed position

    • B. 

      Part of the fitting kit that no one uses

    • C. 

      Mistake in the parts list for the SMT product

  • 9. 
    Can you purge the adhesive when the SMT is running ?
    • A. 

      Not sure

    • B. 

      No

    • C. 

      Yes

  • 10. 
    Why is there a fixed Datum in the SMT ?
    • A. 

      To confuse everybody

    • B. 

      To accurately position the machine in the line

    • C. 

      Adds value to the product

  • 11. 
    How far should the Static Monitoring Sensor be from the top surface of the board ? and how away from the machine? 
    • A. 

      5mm and 50mm

    • B. 

      50mm and 100mm

    • C. 

      25mm and 200mm

    • D. 

      Any distance

    • E. 

      Customer decides

  • 12. 
    Where is the static bar fitted on the SMT?
    • A. 

      Entry top

    • B. 

      Exit Bottom

    • C. 

      Exit top

    • D. 

      Both entry and exit

    • E. 

      Customer option

  • 13. 
    Can the SMT work with SMEMA?
    • A. 

      No

    • B. 

      Yes

    • C. 

      Don't know

    • D. 

      If you fit the SMEMA module

    • E. 

      Only if the SMEMA cables are connected

  • 14. 
    Which of the following are unique benefits of SMT 2009
    • A. 

      SMT 2009 is able to check the static level of boards

    • B. 

      It is possible to change 300 and 400 machines from double side to single side machine easily

    • C. 

      SMEMA as standard

    • D. 

      Boards with Static sensitive components can be processed with Nanocleen

    • E. 

      It is the only one that cleans multi layer boards

  • 15. 
    Why is the accuracy and reproducibility of the Teknek SMT 2009 board conveyor system important to customers?
    • A. 

      Speed of changeover and set up

    • B. 

      Reduces board jam

    • C. 

      Computer controlled

    • D. 

      DC stepper motor

    • E. 

      Minimum operator required

  • 16. 
    How can the static monitoring system protect the customers process?
    • A. 

      It can alarm and tell the operator there is a problem

    • B. 

      It can stop the process

    • C. 

      It can adjust the static bars to eliminate the static

    • D. 

      It prints out a report for the manager