SAP Is-u Quiz-1
26 Questions
| Attempts: 1317
SAP IS-U Fundamentals
Questions and Answers
- 1.
The connection object is always a building
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
It can also be a piece of property, a well or a building site.Rate this question:
-
- 2.
The Connection Object can comprise of one or more premise.
- A.
True
- B.
False
Correct Answer
A. True -
- 3.
The connection object is equivalent to a piece of equipment in the Plant Maintenance (PM).
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The connection object is at the top of the hierarchy of functional location.Rate this question:
-
- 4.
The device location is subordinate to the connection object.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Device Locations are modeled as functional locations in PM component and the connection object is the highest level concept.Rate this question:
-
- 5.
Individual devices are installed in the connection object.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Devices are installed in device locations and are therefore indirectly allocated to connection object.Rate this question:
-
- 6.
The premise is managed as a functional location in the PM.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Premise is used exclusively in IS-U to group together installations of different divisionsRate this question:
-
- 7.
The installation groups together the measuring devices of a division and a premise for the purpose of joint billing
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Devices, registers and fixed payment billing factors which are to be jointly billed are grouped together and assigned to a premise. This can refer to the same or different divisions.Rate this question:
-
- 8.
Move In is a work flow process.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
All steps can be carried out by one employee at the same time without interruption.Rate this question:
-
- 9.
Move in connects the contracts of a business partner to the installations of a premise.
- A.
True
- B.
False
Correct Answer
A. True -
- 10.
A contract account can be assigned to several business partners.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
In IS-U the contract account is configured in such a way that it can only be allocated to one business partner. However, a business partner can have several contract accountsRate this question:
-
- 11.
Devices are based directly on a basic device category.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Devices are classified based on device category which in turn consists of one or more basic categories.Rate this question:
-
- 12.
Device category groups together similar devices.
- A.
True
- B.
False
Correct Answer
A. True -
- 13.
Device Category is managed in the MM component.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
It is managed in MM using material number.Rate this question:
-
- 14.
The device is managed in the Plant Maintenance component as a piece of equipment.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Device is managed in PM using equipment number.Rate this question:
-
- 15.
. Only devices of the same division can be installed in a device location.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Device location describes the installation place in the connection object that is not dependent on the division. The device location can be explicitly assigned to a particular premise if desired.Rate this question:
-
- 16.
Device location is managed as a functional location in PM.
- A.
True
- B.
False
Correct Answer
A. True -
- 17.
Device location is the highest level in the functional location hierarchy in PM.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Connection object represents the level above the device location in the hierarchyRate this question:
-
- 18.
If meter reading results are not available, the meter reading unit cannot be billed.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Missing meter reading results can be estimated by mass runs.Rate this question:
-
- 19.
Validations are always carried out for meter readings.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
There are fixed validations which are always checked, such as implausible previous meter reading results and deviations where the installation is inactive or disconnected, or where devices have not been installed. All other independent and dependent validations can be classified into validation groups in Customizing. The validations can then be carried out automatically.Rate this question:
-
- 20.
Billing simulation must be carried out before billing.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The billing simulation is only a demonstration of how the real billing would be carried out. The billing simulation produces simulation documents that can be used only for invoice simulation purposes.Rate this question:
-
- 21.
After billing, the billable orders are produced.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The billing order results from the creation of the meter reading order. “Billable” status is granted when a billing-relevant meter reading becomes available. Invoice orders are the result of billing.Rate this question:
-
- 22.
Invoicing is only carried out after billing.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Invoicing processes the meter reading results and the open item accounting data and, using this information, generates the bill and the new budget billing plan.Rate this question:
-
- 23.
Only one invoice is ever generated for all contracts of the contract account.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
A contract account can be specified for each account, regardless of whether they are to be billed together with other contracts or separately.Rate this question:
-
- 24.
The invoice generates the print documents.
- A.
True
- B.
False
Correct Answer
A. True -
- 25.
The dunning procedure is carried out using the same procedure for all the contract accounts.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The dunning procedure can be defined in the contract account and can be applied even to individual items.Rate this question:
-
- 26.
Two different types of work orders are
- A.
Internal and External work orders
- B.
Customer orders and Maintenance orders
- C.
Metering Reading Orders and Service Orders
Correct Answer
A. Internal and External work ordersExplanation
There are two types of work orders namely, internal work orders and external work orders. External work orders are mapped with service orders in the CS component. Internal work orders are mapped with plant maintenance orders of the Customer Service(CS).Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jul 30, 2011Quiz Edited by
ProProfs Editorial Team -
Feb 12, 2009Quiz Created by
Plhari
SAP Material Management (ERP Certification) Prep Test
SAP Material Management (ERP Certification) Prep Test
SAP S/4HANA ERP (1709, 1809, and 1909) Certification Exam Prep Test
SAP S/4HANA ERP (1709, 1809, and 1909) Certification Exam Prep Test
Back to top