RCDD Chapter 12
Settings
Chapter 12 of the TDMM
- 1.Which of the following are considered traits of a good project manager.
- A.
Attention to detail
- B.
Sales skills
- C.
Focused on self preservation
- D.
Able to manage project risk
- 2.What are the major areas of project management.
- A.
Human resource management
- B.
Scope management
- C.
Integration management
- D.
Time management
- E.
All of the above
- 3.What are the major areas of project management.
- A.
Cost management
- B.
Quality management
- C.
Communications management
- D.
Risk and procurement management
- E.
All of the above
- 4.The first step in the project should be what:
- A.
Developing a safety plan
- B.
Developing a scope of work (SoW)
- C.
Developing an organizational breakdown
- D.
Review of the lessons learned from previous projects
- 5.Project management schedules can be developed using PERT, which was devised by whom:
- A.
DuPont
- B.
U.S. Navy
- C.
IEEE
- D.
EIA/TIA standard 802.3ah
- 6.Project management schedules can be developed using a Gantt chart, which was developed by whom:
- A.
Henry Gantt
- B.
Charles Gantt
- C.
U.S. Navy
- D.
IEEE
- 7.If there is greater than a 10 percent difference between the most likely and pessimistic estimates, the project is considered:
- A.
Low risk
- B.
Medium risk
- C.
High risk
- D.
Medium-high risk
- 8.Which of the following is a design team member:
- A.
Construction manager
- B.
General contractor
- C.
Architect
- D.
Subcontractor
- 9.The architect is hired by whom:
- A.
General contractor
- B.
Construction manager
- C.
Owner
- D.
Engineer
- 10.Which member is a licensed design professional, recognized by the state:
- A.
Architect
- B.
Consultant
- C.
Engineer
- D.
General contractor
- 11.Which of the following is a member of the construction team:
- A.
General contractor
- B.
Consultant
- C.
Construction manager
- D.
Engineer
- 12.Which of the following is a firm or individual hired by the owner to complete the work required by the design documents:
- A.
Construction manager
- B.
General contractor
- C.
Contractor
- D.
Subcontractor
- 13.Which team member is typically hired near the end of the design phase and participates in the final estimates and bid process.
- A.
General contractor
- B.
Consultant
- C.
Construction manager
- D.
Subcontractors
- 14.Information transport system designs should include what three elements
- A.
Specifications
- B.
Requirements
- C.
Drawings
- D.
Cost estimates
- E.
Scope of Work
- 15.What is a list of numbers and titles compiled to organize the activities and requirements of a construction project.
- A.
PageFormat
- B.
SectionFormat
- C.
MasterFormat
- 16.Before the 2004 edition, the MasterFormat included how many divisions:
- A.
8
- B.
12
- C.
16
- D.
20
- E.
24
- 17.Before 2004 what division of the MasterFormat included telecommunications along with electrical:
- A.
Division 12
- B.
Divsion 14
- C.
Divsion 15
- D.
Division 16
- 18.With the 2004 division of the MasterFormat, what division includes communications:
- A.
Division 25
- B.
Division 26
- C.
Division 27
- D.
Division 28
- 19.Select the types of contracts below:
- A.
Complete cost
- B.
Stipulated sum
- C.
Time and materials
- D.
Cost plus fee
- E.
Unit price
- 20.Of the three types of contracts, which one is a contractor reimbursed for actual costs plus a fee.
- A.
Stipulated sum
- B.
Cost plus fee
- C.
Unit price
- 21.Of the three types of contracts which one is used when the actual SoW cannot be determined at the time of the bid
- A.
Stipulated sum
- B.
Cost plus fee
- C.
Unit price
- 22.Of the three types of contracts, which one has the contractor submitting a fixed price for the SoW required.
- A.
Stipulated sum
- B.
Cost plus fee
- C.
Unit price
- 23.What organization provides information that is a useful resource for contracts:
- A.
National Systems Contractors Association (NSCA)
- B.
Design-Build Institute of America (DBIA)
- C.
American Institute of Architects (AIA)
- D.
Construction Specifications Institute (CSI)
- 24.Which AIA grouping is used for "Change Orders":
- A.
G700
- B.
G701
- C.
G702
- D.
G704
- 25.Which AIA grouping is used for "Application and Certificate for Payment"
- A.
C141
- B.
G702
- C.
G704
- D.
A101
- 26.Who is the chief safety officer
- A.
Owner
- B.
General contractor
- C.
Project Manager
- D.
Safety inspector
- 27.Which of the following should the safety plan address:
- A.
Man hole safety
- B.
Ladder safety
- C.
Exercise safety
- 28.The work breakdown structure (WBS) must cover the elements of the project's end products or deliverables.
- A.
True
- B.
False
- 29.The elements of a WBS relating to the execution steps or content are often individually influenced by the:
- A.
Client
- B.
Product
- C.
Environment
- D.
Market conditions at the time of any projects initiation and execution
- 30.PERT diagrams are used to calculate the ___________ for each activity on the project.
- A.
Cost
- B.
Start and finish date
- C.
Responsible party
- D.
Overall effort
- 31.Information transport systems designs should include what elements:
- A.
Specifications
- B.
Drawings
- C.
Cost Estimates
- D.
All of the above
- 32.The main types of specifications that can be used to define the requirements are:
- A.
Performance
- B.
Proprietary
- C.
Descriptive
- D.
Reference
- E.
All of the above
- 33.CSI stands for:
- A.
Cost Specification Institute
- B.
Consultant Specification Institute
- C.
Construction Specifications Institute
- D.
Crime Scene Investigators
- 34.What document standardizes how the text on each page in a specification is presented:
- A.
PageFormat
- B.
SectionFormat
- C.
MasterFormat
- 35.What document organizes the information in each section and then organizes each section into three parts.
- A.
PageFormat
- B.
SectionFormat
- C.
MasterFormat
- 36.In the MasterFormat what division contains Electronic Safety and Security
- A.
Division 16
- B.
Division 26
- C.
Division 27
- D.
Division 28
- 37.In the MasterFormat what division contains Electrical
- A.
Division 16
- B.
Division 26
- C.
Division 27
- D.
Division 28
- 38.In the MasterFormat what division contains Communications
- A.
Division 16
- B.
Division 26
- C.
Division 27
- D.
Division 28
- 39.The GC's primary role during the construction phase is to:
- A.
Inspect the work
- B.
Pay the bills
- C.
Complete the work
- D.
Perform safety inspections
- 40.Which of the following is a specific responsibility of the contractor
- A.
Perform test
- B.
Issuing the proper permits
- C.
Maintaining a clean and safe work environment
- D.
All of the above
Back to top