A Plus Practis Test

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
Learn about Our Editorial Process
| By Zonder77
Z
Zonder77
Community Contributor
Quizzes Created: 1 | Total Attempts: 287
Questions: 7 | Attempts: 287

SettingsSettingsSettings
A Plus Certification Quizzes & Trivia

Test your knowledge of A+ cert stuff


Questions and Answers
  • 1. 

    A TCP/IP network interface that is configured to use DHCP obtains which of the following information from the DHCP server? 

    • A.

      Ip address

    • B.

      Network speed

    • C.

      Duplex or half duplex interface information

    • D.

      Subnet mask

    • E.

      Default gateway

    Correct Answer(s)
    A. Ip address
    D. Subnet mask
    E. Default gateway
    Explanation
    A TCP/IP network interface that is configured to use DHCP obtains the IP address, subnet mask, and default gateway information from the DHCP server. The IP address is necessary for the device to identify and communicate with other devices on the network. The subnet mask helps determine the network address and the range of IP addresses that can be used within that network. The default gateway is the IP address of the router or gateway device that connects the local network to other networks or the internet.

    Rate this question:

  • 2. 

    The limited range of an IEEE 802.11g network could be extended by adding which of the followingdevices to the network?

    • A.

      Frame relay

    • B.

      Bilinear amplifier

    • C.

      Access point

    • D.

      Bluetooth relay

    Correct Answer
    C. Access point
    Explanation
    An access point can extend the limited range of an IEEE 802.11g network. An access point acts as a central hub that connects wireless devices to a wired network. By adding an access point to the network, it creates additional coverage areas and improves the overall range and connectivity of the network. This allows devices that are located further away from the original network to connect and access the network resources.

    Rate this question:

  • 3. 

    Which of the following are SCSI types that allow for 16 devices, including the adapter, to be connected on a single shared cable

    • A.

      Ultra Wide SCSI

    • B.

      Fast SCSI

    • C.

      Ultra SCSI

    • D.

      Fast Wide SCSI

    • E.

      Ultra 2 SCSI

    Correct Answer(s)
    A. Ultra Wide SCSI
    D. Fast Wide SCSI
    Explanation
    Wide SCSI buses support 16 devices, rather than the 8 devices specified in regular SCSI

    Rate this question:

  • 4. 

    A technician is assisting a user on the telephone and directs the user to a troubleshooting website.The user becomes angry and states that the user could have performed that action alone. Whichof the following actions should the technician take?

    • A.

      Ask whether the user would like to call back when the user is calm

    • B.

      Ask the user about the specific difficulties, listen and attempt to help the user

    • C.

      Tell the user that the technician cannot help if the user is not willing to participate

    • D.

      Tell the user that the technician will transfer the user to another technician

    Correct Answer
    B. Ask the user about the specific difficulties, listen and attempt to help the user
    Explanation
    The technician should ask the user about the specific difficulties, listen attentively, and attempt to help the user. This response shows empathy towards the user's frustration and seeks to understand their specific problem. By actively listening and offering assistance, the technician can address the user's concerns and provide support, potentially resolving the issue and improving the user's experience.

    Rate this question:

  • 5. 

    A technician discovers a half-empty bottle of acetone. Which of the following should the techniciando to dispose of the acetone?

    • A.

      Fill the bottle with water, shake the bottle and pour the contents down a sink drain

    • B.

      Put on Level-3 HAZMAT gloves and pour the remaining liquid down a floor drain.

    • C.

      Send the bottle and remaining contents to an appropriate recycling center

    • D.

      Unscrew cap of bottle and let the acetone evaporate for 48 hours

    Correct Answer
    C. Send the bottle and remaining contents to an appropriate recycling center
    Explanation
    The correct answer is to send the bottle and remaining contents to an appropriate recycling center. This is the safest and most environmentally friendly way to dispose of acetone. Recycling centers are equipped to handle hazardous materials like acetone and can ensure that it is disposed of properly. Pouring it down a drain or letting it evaporate can be harmful to the environment and potentially dangerous. Wearing Level-3 HAZMAT gloves may not be necessary for handling acetone, but it is still important to handle it with care and follow proper disposal procedures.

    Rate this question:

  • 6. 

    Which of the following is the SCSI ID number generally recommended for the CD-ROM?

    • A.

      IDO

    • B.

      ID 5

    • C.

      ID 2

    • D.

      ID 3

    Correct Answer
    D. ID 3
    Explanation
    Every other device can be set to any number as long as it's not in use. It is a recommended
    practice in IT community to set the SCSI ID number for CD-ROM drives to 3

    Rate this question:

  • 7. 

    Which of the following commands can be used to obtain the MAC address of a network card inWindows 2000/XP Professional?

    • A.

      IPCONFIG/RENEW

    • B.

      IPCONFIG/release

    • C.

      IPCONFIG

    • D.

      IPCONFIG/ALL

    Correct Answer
    D. IPCONFIG/ALL
    Explanation
    The command IPCONFIG/ALL can be used to obtain the MAC address of a network card in Windows 2000/XP Professional.

    Rate this question:

Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.