PGDCA First Semester Quiz Exam!
.
- 1.
The term _______ refers to the computer's physical components, such as the monitor, keyboard, memory chips, and hard drive.
- A.
Software
- B.
Hardware
- C.
Firmware
- D.
Output
Correct Answer
B. Hardware -
- 2.
The C language is
- A.
 case-sensitive.
- B.
Not case-sensitive.
- C.
It depends
- D.
None of these
Correct Answer
A. Â case-sensitive. -
- 3.
Resolution of display card is
- A.
The number of pixels
- B.
The number of colours
- C.
The amount of memory
- D.
The speed of CPU
Correct Answer
A. The number of pixels -
- 4.
To Which port a Pen Drive Can Connect?
- A.
USB
- B.
PS/2 port
- C.
Serial port
- D.
Parallel port
Correct Answer
A. USB -
- 5.
Which of the following memories is used by a pen drive?
- A.
Flash memory
- B.
Cache memory
- C.
Physical memory
- D.
RAM
Correct Answer
A. Flash memory -
- 6.
1 Nibble is equivalent to
- A.
4 bits
- B.
8 bits
- C.
32 bits
- D.
None of these
Correct Answer
A. 4 bits -
- 7.
Select the URL from the list below.
- A.
- B.
Http://www.yahoo.com
- C.
D:\downloads\standard
- D.
192.168.0.1
Correct Answer
B. Http://www.yahoo.com -
- 8.
What is the shortcut for PASTE in Windows operating systems?
- A.
Ctrl + P
- B.
Ctrl + V
- C.
Ctrl + C
- D.
Caps Lock + V
Correct Answer
B. Ctrl + V -
- 9.
Is the computer component responsible for calculations, moving and processing information?
- A.
CPU
- B.
RAM
- C.
Motherboard
- D.
Hard Drive
Correct Answer
A. CPU -
- 10.
This is a measurement of speed over a network.
- A.
Megabytes
- B.
Bits
- C.
Megahertz
- D.
Megabits per second.
Correct Answer
D. Megabits per second. -
- 11.
Bandwidth is a term for?
- A.
The speed at which data can be transferred from the server to the client.
- B.
A measurement of how much information can be carried in a given time period (usually a second) over a wired or wireless communications link.
- C.
A unit of information or computer storage equal to one billion bytes.
- D.
None of the above.
Correct Answer
B. A measurement of how much information can be carried in a given time period (usually a second) over a wired or wireless communications link. -
- 12.
Which item is an example of a physical network address?
- A.
IP address
- B.
MAC address
- C.
Workstation name
- D.
Www.proprofs.com
Correct Answer
B. MAC address -
- 13.
What is a LAN?
- A.
Long Area Network
- B.
Ludacris Area Network
- C.
Local Area Network
- D.
Live Area Network
Correct Answer
C. Local Area Network -
- 14.
Which of the following is the most fault-tolerant WAN topology?
- A.
Partial-mesh
- B.
Full-mesh
- C.
Ring
- D.
Bus
Correct Answer
B. Full-mesh -
- 15.
How many nodes share a single channel on a bus topoogy?
- A.
All connected nodes
- B.
One
- C.
Two
- D.
Four
Correct Answer
A. All connected nodes -
- 16.
Which type of cable are you most likely to find on networks that use bus topology?
- A.
UTP cable
- B.
STP cable
- C.
Coaxial cable
- D.
Fiber-optic cable
Correct Answer
C. Coaxial cable -
- 17.
Which topology used in Ethernet
- A.
Bus
- B.
Ring
- C.
Tree
- D.
Mesh
Correct Answer
A. Bus -
- 18.
A port address in TCP/IP is ………bits long.
- A.
32
- B.
48
- C.
16
- D.
64
Correct Answer
C. 16 -
- 19.
The term _______ refers to the computer's physical components, such as the monitor, keyboard, memory chips, and hard drive.
- A.
Software
- B.
Hardware
- C.
Firmware
- D.
Output
Correct Answer
B. Hardware -
- 20.
The term _____________ refers to the set of instructions that directs the hardware in a computer to accomplish a task.
- A.
Input
- B.
Output
- C.
Hardware
- D.
Software
Correct Answer
D. Software -
- 21.
The ______________ is an output device which produces output on paper.
- A.
Monitor
- B.
Keyboard
- C.
Printer
- D.
Mouse
Correct Answer
C. Printer -
- 22.
A ____________ is a pointing device used to move a pointer on the screen and to make selections.
- A.
Keyboard
- B.
Processor
- C.
Mouse
- D.
Monitor
Correct Answer
C. Mouse -
- 23.
The ___________ writes data and instructions in storage devices and performs calculations and other data processing.
- A.
CPU
- B.
Port
- C.
Monitor
- D.
RAM
Correct Answer
A. CPU -
- 24.
The insertion point
- A.
Provides features for changing margins, tabs, an indentations
- B.
Indicated the location where text line when necessary
- C.
Is located under the standard toolbar and has shortcut buttons
- D.
Is located under the standard toolbar and shortcut buttons
Correct Answer
B. Indicated the location where text line when necessary -
- 25.
The word wrap features
- A.
Automatically move text to the next line when necessary
- B.
Appears at the bottom of the document
- C.
Allows you to type over text
- D.
Is the short horizontal line indicating the end of document
Correct Answer
A. Automatically move text to the next line when necessary -
- 26.
The default page orientation of word document is
- A.
Landscape
- B.
Portrait
- C.
Long sides
- D.
Double long side
Correct Answer
B. Portrait -
- 27.
We can send the word documents to
- A.
Microsoft PowerPoint
- B.
Microsoft Excel
- C.
Microsoft Access
- D.
All of above
Correct Answer
A. Microsoft PowerPoint -
- 28.
When you have completely finished working with a document you should
- A.
Close it
- B.
Save it
- C.
Type it
- D.
Edit it
Correct Answer
A. Close it -
- 29.
The following toolbars are displayed in the word application window by default
- A.
Standard toolbar
- B.
Formatting toolbar
- C.
Drawing toolbar
- D.
All of the above
Correct Answer
D. All of the above -
- 30.
Which key or key combination will move the insertion point to the bottom of your document?
- A.
Ctrl+End
- B.
PageDown
- C.
Ctrl+Home
- D.
End
Correct Answer
A. Ctrl+End -
- 31.
Which of the following cannot be done with document version?
- A.
Modifying a version
- B.
Deleting a version
- C.
Opening a version
- D.
None of above
Correct Answer
D. None of above -
- 32.
Right clicking on something in word
- A.
Delete the object
- B.
Nothing the right mouse button is there for left handed people
- C.
Opens the short-cut list
- D.
Insert the picture
Correct Answer
C. Opens the short-cut list -
- 33.
To close the active documents, you can press
- A.
Ctrl+W
- B.
Ctrl+C
- C.
Ctrl+Shift+C
- D.
All of above
Correct Answer
A. Ctrl+W -
- 34.
When you want to view different parts of a document without moving the insertion point.
- A.
Use the previous page or next page buttons
- B.
Use the keyboard
- C.
Use the vertical and horizontal scroll bars
- D.
Use the zoom button
Correct Answer
C. Use the vertical and horizontal scroll bars -
- 35.
You can replace the text
- A.
Ctrl+H
- B.
Ctrl+R
- C.
Replace from Edit menu
- D.
Both a & b
Correct Answer
D. Both a & b -
- 36.
The special characters Word inserts into your document is called
- A.
Removable character
- B.
Non-Printing character
- C.
Printing Character
- D.
Hidden character
Correct Answer
B. Non-Printing character -
- 37.
The selection bar is
- A.
Below the title bar
- B.
To the far left of your document
- C.
Used to open other office applications
- D.
Located below the status bar in the word windows
Correct Answer
B. To the far left of your document -
- 38.
You can add a date to a document by
- A.
Inserting a text date
- B.
Inserting a date field that will update automatically
- C.
Typing the date manually
- D.
All of the above
Correct Answer
B. Inserting a date field that will update automatically -
- 39.
We can create the new shortcut key from
- A.
Options from Tools menu
- B.
Customize from Tools menu
- C.
Properties from File menu
- D.
Auto Correct from Toolbars menu
Correct Answer
B. Customize from Tools menu -
- 40.
You can delete text by
- A.
Selecting the text and pressing the Ctrl key
- B.
Selecting the text and pressing the Delete key
- C.
Selecting the text and pressing the Alt+PageUp keys
- D.
Selecting the text and pressing the Exit key.
Correct Answer
B. Selecting the text and pressing the Delete key -
- 41.
The insert mode in MS Word means
- A.
You can highlight text
- B.
You can type over existing text
- C.
New text is placed in document at insertion point
- D.
None of above
Correct Answer
C. New text is placed in document at insertion point -
- 42.
To cut or copy text you must first
- A.
Click the remove/duplicate button
- B.
First highlight the text and click the Copy or Cut command from edit menu
- C.
Click on File menu
- D.
None of above
Correct Answer
B. First highlight the text and click the Copy or Cut command from edit menu -
- 43.
When you drag selected text you can
- A.
Delete text
- B.
Link text
- C.
Copy text
- D.
Move text
Correct Answer
D. Move text -
- 44.
The drag and drop feature allows you to
- A.
Switch from insert to over type mode
- B.
Move and copy text using the mouse
- C.
Move and copy text using the clipboard
- D.
Open a new document and drop it into the active document
Correct Answer
B. Move and copy text using the mouse -
- 45.
The clipboard is a
- A.
Feature that automatically adds or deletes space when you paste text
- B.
Used to temporarily store items that have been cut or copied
- C.
A reserved place in the memory of the computer
- D.
Located below the status bar
Correct Answer
B. Used to temporarily store items that have been cut or copied -
- 46.
The term gigabyte refers to
- A.
1024 bytes
- B.
1024 kilobytes
- C.
1024 megabytes
- D.
1024 gigabytes
Correct Answer
C. 1024 megabytes -
- 47.
Programs designed to perform specific tasks is known as
- A.
System software
- B.
Application software
- C.
Utility programs
- D.
Operating system
Correct Answer
B. Application software -
- 48.
CAD stands for?
- A.
Computer aided design
- B.
Computer algorithm for design
- C.
Computer application in design
- D.
All of the above
Correct Answer
A. Computer aided design -
- 49.
In which language is source program written?
- A.
English
- B.
Symbolic
- C.
High-Level
- D.
Temporary
Correct Answer
C. High-Level -
- 50.
The computer code for the interchange of information between terminals is
- A.
ASCII
- B.
BCD
- C.
EBCDIC
- D.
All of the above
Correct Answer
A. ASCII -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2022Quiz Edited by
ProProfs Editorial Team -
Sep 02, 2018Quiz Created by
OCA20189
Back to top